• 제목/요약/키워드: polyvinylacetate

검색결과 6건 처리시간 0.021초

Effect of Initiator on Performance of Polyvinylacetate as Emulsion Adhesive

  • Lee, Kangseok;Shim, Sang Eun
    • Elastomers and Composites
    • /
    • 제50권4호
    • /
    • pp.286-291
    • /
    • 2015
  • Polyvinylacetate (PVAc) was prepared using thermal initiation and redox initiation via emulsion polymerization at $80^{\circ}C$. The polymerization conditions had a significant effect on the properties of the synthesized PVAc. When hydrogen peroxide and tartaric acid as the initiator for redox polymerization were used, the synthesized PVAc had a low molecular weight. In comparison with thermal polymerization, smaller PVAc particles were formed during the redox polymerization due to relatively faster polymerization rate, which in turn resulted in improved adhesion property. It is considered that the rapid generation of smaller particles induces the formation of a large surface area.

Diffraction Gratings of Photopolymers Composed of Polyvinylalcohol or Polyvinylacetate Binder

  • Park, Dong-Hoon;Dejun Feng;Hanna Yoon;Park, Suk-Ho
    • Macromolecular Research
    • /
    • 제11권1호
    • /
    • pp.36-41
    • /
    • 2003
  • Holographic gratings in two kinds of photopolymers (PPs) were fabricated by optical interference method. Polyvinylalcohol (PVA) and polyvinylacetate (PVAc) were employed as polymer binders and photopolymerization of acrylamide (AA) was confirmed using infrared spectroscopy. Dynamic behavior of the diffraction efficiency was monitored and its temporal stability at room temperature was also observed. Additionally, the temperature dependence of these gratings was investigated in two PPs. The surface topographical change of the photopolymer layer was observed by atomic force microscope (AFM).

Unsaturated Polyester/Polyvinylacetate Semi-IPN의 경화반응속도에 따른 상분리현상 연구 (The Study on Phase Separation Development by Curing Reaction Rate for Unsaturated Polyester/Polyvinylacetate Semi-IPN)

  • 장원영;김무술;김진환;남재도
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.78-89
    • /
    • 2001
  • 불포화폴리에스터/폴리비닐아세테이트 semi-IPN의 경화과정 중 경화속도와 상분리 확산속도의 상호관계 속에서 형성되는 상분리 모폴로지를 광산란 및 열분석 장치를 이용하여 연구하였다. 열경화성 고분자의 경화과정 중 열가소성 고분자의 확산에 기인한 물성의 변화를 측정하였고, 상분리를 수반하는 경화과정에서의 활성화에너지의 변화를 Flynn-Wall method를 이용하여 구하였다. 반응에 의하여 나타나는 상분리현상은 경화과정 중 다양한 상분리 거동을 나타내게 되는데, 폴리비닐아세테이트가 10 wt%일 경우에는 반응도중에 상분리가 일어나지 않고 냉각 후 상온에서 nucleation & growth 거동과 유사한 형태로 상분리가 발생하였고, 11.65 wt% 이상에서는 반응도중 spinodal decomposition으로 사료되는 상분리가 발생하였다. 또한 상분리현상이 경화속도에 영향을 미친 것을 활성화에너지의 변화거동으로부터 확인하였으며, 온도변화에 따라 총산란량을 측정하였고 이로부터 확산에 의한 상분리 속도 R(${\beta}_m$)를 비교하였다.

  • PDF

EVA를 이용한 친수성 필름의 제조 (Preparation of Hydrophilic Film using EVA)

  • 이진;김영성;최창남
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2012년도 제46차 학술발표회
    • /
    • pp.25-25
    • /
    • 2012
  • 농업용 비닐하우스에 사용되는 EVA (ethylene-vinylacetate copolymer)고분자 필름의 무적성을 향상시킬 목적으로 EVA 및 PVAc (polyvinylacetate)필름을 가성소다 용액으로 가수분해하여 친수성을 검토하였다. EVA는 분말상의 고분자를 프레스로 압착하여 필름으로 성형하였으며, PVAc는 아세톤에 용해한 후에 필름으로 성형하였다. 가수분해에 따른 필름의 구조변화는 적외선 분광분석으로, 친수성 변화는 접촉각으로 평가하였다. 가수분해 시간이 증가함에 따라 친수성이 증가하였다. 이는 가수분해에 의해 소수성인 아세테이트기가 친수성인 수산기로 변했기 때문으로 생각되었다. 한편, 가수분해시킨 EVA 및 PVAc를 사용하여 프레스로 압착하여 제조한 필름에서는 친수성이 그다지 크게 증가하지 않았다.

  • PDF

稀薄溶液에서의 Polymer의 機械的 切斷 (제3보). 混合溶媒의 영향 (Mechanical Degradation of Polymers in Dilute Solution (III). The Influence of the Mixed Solvents)

  • 원영무
    • 대한화학회지
    • /
    • 제17권3호
    • /
    • pp.207-212
    • /
    • 1973
  • 毛細灌法을 利用하여 여러가지 混合溶媒系(dioxane-n-butanol, dioxane-sec-butanol, dioxane-ethyleneglycol, dioxane-kerosene)중에서 polyvinylacetate의 희박용액을 機械的으로 切斷하여 그 결과로 얻어진 平均切斷速度定數(k) 및 極限重合度(g)를 moleculare dimension이 동일한 조건하에서 比較검토하였다. 그 결과 k보다는 g의 값이 사용하는 solvent의 종류에 따라 크게 영향을 받음을 알았으며 이에 關하여 考察하였다.

  • PDF