• 공업화학
• /
• 제10권6호
• /
• pp.913-916
• /
• 1999

과불화 1가 알코올인 N-ethyl-N-2-hydroxyethyl-perfluorooctanesulfonamide(HFA)와 삼관능성 이소시아네이트인 Tris(6-isocyanatohexyl)isocyanurate(TIHI)를 반응시켜 불소를 함유한 디이소이아네이트(FMD)를 합성한 후, poly(tetramethylene) glycol과 반응시켜 폴리우레탄 표면 개질제인 불소 변성 폴리우레탄(FMPU)을 합성하였다. 이렇게 합성한 불소 변성 폴리우레탄(FMPU)을 polyester type의 폴리우레탄(BPU)에 혼합하여 표면 성질과 열적 성질을 각각 접촉각 측정기인 $Kr{\ddot{u}ss$ G-10과 DSC로 측정하였다. 혼합된 폴리우레탄 수지에서 불소 변성 폴리우레탄 함량이 1 wt %로 증가함에 따라서 표면 에너지가 47.82 dyne/cm에서 17.64 dyne/cm로 급격히 감소했으나, 5 wt %에서 10 wt % 범위의 경우에는 접촉각의 변화가 완만하게 관찰되었다. 이와 같은 실험 결과 폴리우레탄 표면 개질제(FMPU)에 함유된 불소의 표면 배향성으로 인하여 표면 성질이 소수성을 띄나 폴리우레탄 표면 개질제(FMPU)의 함량이 5 wt % 이상에서는 불소 변성 폴리우레탄(FMPU)과 폴리우레탄(BPU)의 비상용성에 기인한 상 분리가 현저히 나타났다. 이와 같은 현상은 폴리우레탄 표면 개질제(FMPU)가 첨가된 폴리우레탄의 열적 성질에서 FMPU의 함량이 5 wt % 이상일 때, 비상용성에 의한 상 분리로 인하여 FMPU 고유의 얼적 거동이 관찰됨으로써 확인할 수 있었다.

• 멤브레인
• /
• 제25권6호
• /
• pp.530-537
• /
• 2015

태양광 발전시스템은 태양복사에너지를 반도체의 광전효과를 이용하여 전기에너지로 직접 전환시키는 에너지변환 시스템이다. 태양전지의 내구성과 에너지변환율에 영향을 미치는 핵심소재로는 다층형 필름구조를 갖는 백시트를 들 수 있다. 대표적인 상용 백시트는 고내구성 poly(vinyl fluoride) (PVF) 필름이 중심축에 위치하고 가격저감을 위해 도입된 poly(ethylene terephthalate) (PET) 필름이 그 양쪽에 접합된 삼층구조로 구성된다. 하지만, PVF 필름의 높은 가격은 저렴한 고내구성 백시트를 요구하는 시장상황을 반영하기 어렵게 한다. 이를 위한 해결책으로는 PVF 필름을 결정성 PET 필름으로 대체한 탄화수소계 백시트가 될 수 있다. 하지만, PET 필름의 본질적인 가수분해에 대한 취약성으로 인해, 추가적인 수분에 대한 배리어성 부여는 필수적이다. 이를 위해 본 연구에서는 소수성 실리카 나노입자 분산기술을 활용한 수분차단성 폴리우레탄 접착제를 개발코자 하였다. 개발된 접착제는 내부에 위치한 PET 필름으로의 수분침투를 약화시켜, 가수분해속도를 지연시킬 것이라 기대되었다. 본 개념의 효용성을 확인하기 위해, 표준화된 온습도조건에 노출된 이후의 일반접착제와 수분차단성 접착제가 도입된 백시트의 기계적 강도 및 시간당 태양전지성능 변화가 비교평가되었다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.37-46
• /
• 2013

This paper surveys the ESD characteristics of the PANI added PU/MWNT film according to the manufacturing conditions such as variation of the loading contents of PANI and the mixture ratio of 2 dispersion solutions. For this purpose, PANI added PU/MWNT ground films were made with IPA/MWNT 3wt% dispersion solution and PANI/DMF dispersion solutions(5, 10, 15, 20, 25, and 30wt% contents of the PANI) by the mixture ratio of dispersion solution(10/50, 20/40, 30/30, 40/20, and 50/10part) in the PU (972DF) 100g, which was treated with 500rpm for 30min in the stirrer with condition of the dry temperature $120^{\circ}C$ for 2min. Totally, 36 kinds of PANI added PU/MWNT film specimens were prepared. The physical properties of the PANI added PU/MWNT films such as electrical resistivity, absorbancy by UV-Vis spectrometer, and triboelectricity were measured and discussed with surface characteristics of the PANI added PU/MWNT films by SEM. The dispersion property of PANI to the DMF showed best dispersion at the 25% of PANI content. The surface electrical resistivity of the PANI added PU/MWNT films was decreased with increasing the weight content of PANI/DMF dispersion solution, and it showed the lowest value $10^6{\Omega}$ at the mixing condition of PANI/DMF 20part and MWNT/IPA 40part with 30% PANI. Furthermore, it was shown that the electrical and physical properties of the PANI added PU/MWNT film such as electrical resistivity, and triboelectricity were better than those of PU/MWNT film prepared with no PANI, which was result obtained in previous paper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2005

In this paper, experimental methods about the flow behavior of thin polymer film by various edge patterns in the spin coating process for stable cover layer coating of a blu-ray disc is described. The blu-ray disc, a next-generation optical disc format over 25GB, consists of a 1.1m thick substrate and a 0.1mm tick cover layer. Generally, cover layer on the blu-ray disc is made by the polymer spin coating process. However, it is hard to secure sufficient coating uniformity around the rim on the cover layer. In order to get the uniform thickness deviation and to minimize the bead around the rim, the edge of the disc substrate can be modified into various patterns, such as normal plain, trench, step and chamfer pattern, etc, around the rim on the disc and experimented with various parameters, such as surface tension, viscosity, coating time, temperature and rotation speed, etc. And the optimal shape of the rim was tried to get by 3 dimensional computer simulation of the polymer expulsion process.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권2호
• /
• pp.71-84
• /
• 2015

A low-profile flow sensor has been designed, fabricated, and characterized to demonstrate the feasibility for monitoring hemodynamics in cerebral aneurysm. The prototype device is composed of three micro-membranes ($500-{\mu}m$-thick polyurethane film with $6-{\mu}m$-thick layers of nitinol above and below). A novel super-hydrophilic surface treatment offers excellent hemocompatibility for the thin nitinol electrode. A computational study of the deformable mechanics optimizes the design of the flow sensor and the analysis of computational fluid dynamics estimates the flow and pressure profiles within the simulated aneurysm sac. Experimental studies demonstrate the feasibility of the device to monitor intra-aneurysmal hemodynamics in a blood vessel. The mechanical compression test shows the linear relationship between the applied force and the measured capacitance change. Analytical calculation of the resonant frequency shift due to the compression force agrees well with the experimental results. The results have the potential to address important unmet needs in wireless monitoring of intra-aneurysm hemodynamic quiescence.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.426-430
• /
• 2001

Conventional smart foam is not applicable to active noise control in a duct having flow. Thus, this paper presents a ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded in the foam. The embedded PVDF element acts as an actuator to reduce noise at lower frequencies and the foam absorbs noise at higher frequencies. A feedforward adaptive filtered-x LMS controller is used to minimize the signal from the error microphone. Experiments are executed to reduce broadband and tonal noise.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권1호
• /
• pp.64-72
• /
• 1994

본 고는 현재 전기적 응용을 위한 수지 절연물의 진공/가압 수지-주형처리 분야에서 가장 앞선 기술과 연구개발력을 보유하고 있는 스위스의 Ciba-Geigy사와 최신의 진공성형 시스템을 개발, 생산하고 있는 독일의 Hedrich사 및 진공주형/자동가압 성형장비를 생산하는 스위스의 Vogel사 등을 최근에 방문하여 Epoxy, Polyurethane, Polyester 및 Silicone 수지 등의 수지절연시스템을 가지고 구조적으로 기포가 없으며 전기적, 기계적, 열적특성이 매우 우수하고 매끄러운 표면이 요구되는 수지 mold제품을 생산하는데 적용되고 있는 진공 수지-주형처리기술의 현황과 아울러 경화시간을 크게 단축시켜 생산자동화가 가능한 최신의 자동가압겔화(Automatic pressure gelation)/주입몰드공정(Injection molding process)의 특징 및 기술개발현황에 대해 파악한 내용을 소개하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.641-645
• /
• 2001

In this paper, it is discussed that active noise control in a circular duct using smart foam. Firstly, it is demonstrated that the potential of the conventional smart foam, proposed by Fuller, for active noise control in a duct. Conventional smart foam is not applicable to active noise control in a duct having flow. Thus, this paper presents a ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded in the foam. The embedded PVDF element acts as an actuator to reduce noise at lower frequencies and the foam absorbs noise at higher frequencies. A filtered-x LMS controller is used to minimize the signal from the error microphone. Experiments are executed to reduce broadband and tonal noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1132-1137
• /
• 2001

The smart foam that is first proposed by Fuller(2) is not applicable to active noise control in a duct having flow. Thus. this paper presents the ring-type smart foam as an alternative. The ring-type smart foam consists of polyurethane acoustic foam of lining shape and PVDF film embedded along the mid-surface of the foam lining. A feedforward adaptive filtered-x LMS controller is used to minimize the signal from the error microphone. To enlarge quiet sound region. two error microphones are used to update system modeling filter (SIMO method). Sound intensity control using the ring-type smart foam is also discussed

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.393-398
• /
• 2018

This work offers a promising approach for development of a temperature-responsive colorimetric display platform. For this purpose, uniform thermochromic microcapsules consisting of a cholesteric liquid crystal (CLC) core and a thin polyurethane shell layer were fabricated by conducting in-situ condensation polymerization at the interface of monodisperse CLC-in-water emulsion drops. Colloidal packing-driven microcapsule registry led to exact 2-dimensional positioning of CLC microcapsules into a holes-patterned flexible film stencil. Furthermore, we showed that the designated registry of different color types of CLC microcapsules on the stencil enabled development of a microwriting display technology capable of reversible text representation according to temperature change.