• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.151-155
• /
• 2012

In the present study, we synthesized mesoporous silica hollow spheres with different wall thickness using polystyrene (PS) spheres as a structure template, tetraethoxysilane (TEOS) as a silica source, cetyltrimethylammonium bromide (CTAB) as a template. Particle size and dispersion of PS spheres were strongly depended on the concentration of surfactant in the aqueous solutions. The size of PS spheres was increased with decreasing concentration of surfactants. Dispersion of PS particle was improved when the surfactant concentration was lower than 0.5 g of surfactant.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.93-95
• /
• 2001

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.290-294
• /
• 2011

The surface resistance of poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT/PSS), which has appeared to be one of the most successful conductive polymers, is affected by the solvent. In this paper, pellet-type PEDOT/PSS was suspended in $H_2O$, ethanol (EtOH), ethylene glycol (EG) or dimethylsulfoxide (DMSO), and coated on PET film. The surface resistances of the films made from EG or DMSO suspension were observed to be lower, nearly by 2 orders of magnitude, than that made from $H_2O$ suspension. No significant difference among four kinds of films was observed when the thermal properties and chemical structures were investigated by TGA and XPS, respectively. However, particle size of PEDOT/PSS was in the range of $1-3{\mu}m$ in EG or DMSO, on the other hand, less than $0.1{\mu}m$ in $H_2O$. It is considered that the particle size of PEDOT/PSS in the suspension plays an important role for the surface resistance.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.357-362
• /
• 2013

Monodispersed polystyrene latex spheres (PLS) and PS-MPS/silica composite nanospheres were used to test high efficiency particulate air (HEPA) filters. Prior to filter tests, all nanospheres used in this work were characterized by measuring their average particle diameters and coefficients of variation (CV) for assessing them as artificial dusts. The average particle sizes of PLS and composite nanospheres could be well controlled in the range of 100~300 nm well by changing reaction temperature and the amount of a stabilizer during emulsion polymerization. The CV of all nanospheres were also in the range of 3~7%, lower than 15% that is the criterion for monodispersed particle distributions. Furthermore the results of HEPA filter tests show that all nanospheres used were quite proper as artificial dusts for testing air filters.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.225-233
• /
• 2016

The chemical engrafting of polymers on particle surface, plays an important role on selective partitioning of micro/nano-particles in the separated layers of liquid media, such as aqueous two phase systems (ATPSs). Three polymers, dextran, poly (ethylene glycol) and albumin were chosen and chemically conjugated to the polystyrene (PS) magnetic microparticle surface. The attachment of long-chained polymer chains which may switch the partition behavior, can be simply performed by S_N2 substitution of various polymers having primary amine functional groups, with p-toluenesulfonyl (tosyl)-activated polystyrene magnetic micro-particles. The surface modification of microparticle was probed by infrared microscopy. The distinctive peak represents N-H stretching vibration mode for microparticles after the reaction and it is common for all three polymers examined. The locations of main peaks are similar for all micro-particles but different and distinguishable in fingerprint region.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.524-530
• /
• 2004

Polystyrene particles (PS) with poly(ethylene glycol) units on surface were formed by an emulsifier-free emulsion polymerization using styrene, poly(ethylene glycol) methacrylate (PEG-MMA) or poly(ethylene glycol) dimethacrylate (PEG-diMMA) at pH 7, and followed by freeze-drying to give the corresponding powders. The structures of PS particles were confirmed by FT-IR spectroscopy, and the particle size and distribution the PS particle were observed by scanning electron microscopy and particle analyzer. Monodisperse polymer particles were obtained at a concentration of PEG-MMA 2∼5 mol% or PEG-diMMA 1 mol% relative to styrene. The highest zeta potential of polymer surface was measured to be 183 mV at a polymer of PEG-MMA 5 mol%, which was measured in dielectric medium by means of ELS-8000 dynamic light scattering.

• Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.201-207
• /
• 2006

A simple empirical model with good quantitative prediction of inter-particle and intra-particle distance in a cake layer with respect to ionic strength was developed. The model is an inverse length scale with functions of interaction energy and hydrodynamic factor and it explains that the inter-particle and intra-particle distance in a cake is directly related to the effective size of particles. Particle compressibility with respect to ionic strength was also predicted by the model. The model corroborated very well with experimental results of polystyrene microsphere latex particles microfiltation in a dead end operation. From the results of the model, specific cake resistance could be controlled by the same variables affecting the height of particle energy barrier described by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.400-401
• /
• 2008

전기영동형 전자종이 디스플레이의 새로운 소재로써 $C_{60}$(fullerene)와 같은 나노 입자를 포함하는 새로운 전기영동 입자를 제조하였다. 본 연구에서는 안정제로 poly(vinyl pyrrolidone)(PVP)를 사용하여 fullerene을 포함하는 styrene emulsion을 안정화 한 후 라디칼 중합을 통해 fullerene이 포함된 polystyrene microemulsion particles을 제조 합으로써 입자의 분산안정성을 높이고 전기영동에 따른 입자의 움직임을 최적화하도록 하였다. 이 실험에서는 fullerene의 양에 따라 제조된 입자의 크기와 입자 분포를 관찰하였다. 입자의 크기와 입자 분포는 주사형 전자현미경 (SEM) 을 이용하여 확인하였다. 또한 fullerene-PS 입자의 구조 분석과 특성평가를 위해서 FT-IR를 측정하였고, 입자의 열적 성질을 위해 TGA를 측정하였다.

• Korea-Australia Rheology Journal
• /
• v.21 no.3
• /
• pp.185-191
• /
• 2009

Polystyrene/multi-walled carbon nanotube (PS/MWCNT) composites were prepared by the use of latex technology. The monodisperse PS latex was synthesized by an emulsifier-free emulsion polymerization from styrene/potassium persulfate/water system in the presence of ethanol. The MWCNTs were first treated with acid mixture to eliminate impurities, dispersed in deionized water driven by ultrasonicator, and then mixed with the PS latex. From these mixtures, PS/MWCNT composites were prepared by freeze-drying and subsequent compression molding. In the small-amplitude oscillatory shear experiments, both complex viscosity and storage modulus increased with increasing MWCNT content. A pronounced effect of MWCNT content was observed, resulting in larger storage modulus and stronger yield behavior at low frequencies when compared to unmodified PS. It showed a transition from viscous to elastic behavior with increasing MWCNT content. Over the MWCNT content of 3 wt%, the storage modulus was higher than the loss modulus across all frequencies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1573-1574
• /
• 2009

Fullerene/polystyrene nanoparticles having the average size of 300 nm ~ 1 ${\mu}m$ were prepared by emulsion polymerization in aqueous medium. Poly(vinyl pyrrolidone) and potassium persulfate were used as a dispersant and an initiator, respectively. The contents of fullerene in the nanoparticle were controlled to be from 10 to 57 wt% by varying the feed ratio, which was confirmed by IR-spectroscopy, thermogravimetric analyses, and elemental analyses. Dynamic light scattering experiments revealed the particles have a broad size distribution. Further characterizations of the nanoparticles were performed by using SEM and TEM observation. The high content of fullerene in the particles will find applications in photovoltaic and organic semiconducting area.