• 공업화학
• /
• 제25권6호
• /
• pp.598-601
• /
• 2014

Polypropylene의 농도와 코팅 막의 건조 온도 및 나노실리카의 첨가량의 변화 등 polypropylene 박막 제조를 위한 공정 변수들이 박막의 표면 형상 및 특성에 미치는 영향을 연구하였다. Polypropylene의 농도가 30 mg/mL인 경우에 $30^{\circ}C$의 건조 온도로 90 min 동안 93 mTorr의 진공 조건으로 최대 접촉각 $154^{\circ}$를 갖는 초소수성 polypropylene 박막을 얻을 수 있었다. 용매 휘발을 위한 진공 오븐에서의 건조 온도가 증가함에 따라 박막의 거칠기가 감소하여 접촉각이 낮아지는 효과를 가져왔다. Polypropylene-실리카 복합막은 박막 내에 나노실리카의 함유량의 증가에 따라 박막 표면이 미세 다공성 구조에서 미세 구형 구조물로 변환되면서 접촉각의 증가로 초소수성 표면 특성을 보였다.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.409-413
• /
• 2013

A polypropylene film was ablated using a $CO_2$ laser, Ti-sapphire femtosecond laser, and UV nanosecond laser. For modified atmosphere packaging, polypropylene films were ablated by laser pulse with different pulse energies and measured on an optical microscope. Also, we observed the shelf life of a banana contained within packaging of a breathable zipper bag. As a result, we have demonstrated that the breathable film can efficiently extend the shelf life of respiring foods, particularly fresh fruits and vegetables. The development of breathable film laser microfabrication system will more useful for industrial applications.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.217-222
• /
• 2021

In this study, random polypropylene (rPP) was compounded with two of monoglycerides, namely, glyceryl monolaurate (GML) and glyceryl monostearate (GMS), as antifogging agents to improve its antifogging performance. rPP film samples were prepared by a film-casting method using a three-roll casting machine after melt blending through a twin screw extruder. With an increase in the monoglyceride content, the melt flow index for rPP films with GML and GMS increased, and their yield strength decreased. The incorporation of GMS in rPP was proven to be more effective in improving its physical properties than was rPP with GML. When GML and GMS were separately added to the rPP film at contents of more than 1 phr and more than 5 phr, respectively, the film exhibited antifogging performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1584-1586
• /
• 1999

The polypropylene has been known to have higher melting temperature than Polyethylene. and good mechanical properties. This paper introduces the experiment result for tree properties of polypropylene thin film with a crystal structure. According to the experiment. tree properties is appeared boundary section of thin film first of all. Also, Spherulites magnitude of slow cooling is larger than that of rapid cooling.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.17-22
• /
• 2013

The production of flame-retardant polypropylene powder coating with the addition of flame retardant (PP) controlled rheology (CR) and polypropylene, were discussed comparing the mechanical properties, such as safety and topical coating properties. Mechanical properties measurements showed almost the same as AA-1 where the flame retardant is not added. These results appear to, and because it is excellent in compatibility with polypropylene and flame retardant. Physical properties of the coating film, a test piece flame retardant organic is added, although it shows the physical properties of the coating film was stable, did not show the physical properties satisfactory is the test piece flame retardant of weapons has been added. In the safety of the topic, AA-4, AA-5 the results of thermal analysis but it is excellent, the LOI is excellent in 27.8 vol% 27.0 vol% in AA-4 and AA-2, AA-3, and 27.4 vol%, did not show many obstacles flame AA-5 result UL94.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.247-248
• /
• 2008

• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.110-114
• /
• 2011

Polymeric films of high chemical stability and mechanical strength covered with a thin metallic film have been extensively used in various fields as electric and electronic materials. In this study, we have chosen polypropylene (PP) as the polymer due to its outstanding chemical resistance and good creep resistance. We coated thin nickel film on PP films by the electroless plating process. The surfaces of PP films were pre-treated and modified to increase the adhesion strength of metal layer on PP films, prior to the plating process, by an environment-friendly process with atmospheric plasma generated using dielectric barrier discharges in air. The surface morphologies of the PP films were observed before and after the surface modification process using a scanning electron microscope (SEM). The static contact angles were measured with deionized water droplets. The cross-sectional images of the PP films coated with thin metal film were taken with SEM to see the combined state between metallic and PP films. The adhesion strength of the metallic thin films on the PP films was confirmed by the thermal shock test and the cross-cutting and peel test. In conclusion, we made a composite material of metallic and polymeric films of high adhesion strength.

• 한국전기전자재료학회논문지
• /
• 제23권1호
• /
• pp.48-52
• /
• 2010

This paper examined the effects of specimen elongation on the electrostatic electrification voltages when polypropylene film specimens with 500%, 650% and 700% elongations were rotated at 1550 rpm. The results were as follows. The decease of electrification voltage was not measured according to the time elapse, in case of elongated specimens with 70% environment humidity. As +10 kV was applied to the specimens with 650% elongations, the electrostatic electrification voltages were increased by the effect of environment humidity (1.23~1,25 kV at 50~60% humidity, and 1,46 kV at 70% humidity). The voltages were decreased to 1.2 kV at 700% elongation. As -10 kV was applied to the specimens with 500%, 650% and 700% elongations, the electrostatic electrification voltages were negatively increased with the increase of environment humidity and the elongation of specimens.

• KSBB Journal
• /
• 제17권3호
• /
• pp.235-240
• /
• 2002

친수성 표면을 만들기 위하여 산소분위기에서 1 keV의 에너지를 갖는 아르곤 이온빔을 폴리프로필렌 담체의 표면에 조사하였다. 삼차 증류수에 대한 접촉각은 개질 전의 $78^{\circ}$에서 최적의 조건에서 $22^{\circ}$까지 감소하였다. 이온 보조 반응 후의 친수성 증가는 ether, carbonyl, carboxyl 등의 새로 형성된 작용기에 의한 것이며 극성 용매에 대한 안정성이 우수하므로 활성화된 표면이 폐수 내에서도 안정하다. 활성화된 폴리프로필렌 담체를 합성폐수내의 유기물을 제거하기 위한 bio-film공정에 적용하였다. 이온 보조 반응법으로 친수성 표면으로 개질된 PP 담체는 극성 용매내에서 극성작용기가 유지되었으므로 안정된 표면 특성을 이용하여 박테리아 부착의 생물막 공정에 대한 연구를 수행하여 미생물의 부착은 표면의 염기성 극성작용기에 의하여 증진됨을 확인하였다. 합성폐수에 대한 처리 효율은 30%까지 증가 하였으며 장시간에 걸친 COD 농도 감소 효과를 나타내었으므로 이온 보조 반응법에 의하여 처리된 PP고분자를 수질 개선용의 담체로 사용하여 처리효율을 증가시킬 수 있음을 확인하였다.