• 대한화학회지
• /
• 제23권6호
• /
• pp.402-411
• /
• 1979

Pyrrolidone의 음이온중합의 새로운 개시제로서 Pyrrolidone-N-sulfonyl chloride를 합성하고, 이 개시제에 의한 중합반응기구를 제안하였으며, 중합결과를 분석 고찰하여 다른 개시제의 경우와 비교하였다. Pyrrolidone-N-sulfonyl chloride의 농도를 작게할 수록 합성되는 고분자의 점도가 증가함을 관찰하였으며, 개시제의 KOH에 대한 비율이 0.25일때 중합속도 및 중합수율이 가장 큰 결과를 얻었다. PNSC/KOH 촉매작용에 의한 pyrrolidone의 음이온 중합은, $CO_2$/KOH 촉매작용의 경우에 비하여 일반적으로 중합속도가 빠르고, 중합수율도 높았다.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.61-65
• /
• 2010

Most of the chemical reactions performed in the chemical industry are exothermic, meaning that thermal energy is released during the reaction. It is also important to understand the thermal hazards such as thermal stabilities and runaway reactions, which are governed by thermodynamics and reaction kinetics of the mixed materials. The paper was described the evaluation of thermal behavior caused by an exothermic batch process in manufacture of the vinyl acetate resin. The aim of the study was to evaluate the thermal stabilities of raw materials with operating conditions such as a reaction inhibitor, heating rate, reaction atmosphere and the mount of methanol charged in the vinyl acetate polymerization process. The experiments were performed in the differential scanning calorimeter(DSC), C 80 calorimeter, and thermal screening unit($TS^u$). It was suggested that we should provide the thermal characteristics for raw materials to present safe precautions with operating conditions in the vinyl acetate polymerization process.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.67-76
• /
• 2005

We synthesized an energetic prepolymer(glycidyl dinitro propyl formal, GDNPF) for plastic-bonded explosive and measured its thermodynamic parameters. Glycidyl dinitro propyl formal(GDNPF) as an energetic monomer was epoxidized from allyl-2,2-dinitro propyl formal which is reacted with dinitro propyl alcohol and excess allyl alcohol, and then energetic polymer of GDNPF was polymerized by cationic ring opening polymerization. Thermodynamic parameters were obtained from the ceiling temperature($T_c$) values of 1 mole monomer at reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of prepolymer (GDNPF). The activated monomer polymerization has been executed with precisely controlled feed of GDNPF monomer to reactor in the complex state catalyst generated by $BF_3{\cdot}(C_3H_5)_2$ and 1,4-butanediol in $C_2H_4Cl_2$. Number average molecular weight(Mn), polydispersity(Pd), hydroxy number and glass transition temperature($T_g$) of prepolymer(GDNPF) were $2,500{\sim}3,000,\;1.2{\sim}1,3,\;0.6{\sim}0.8eq/kg\;and\;-20{\sim}-25^{\circ}C$ respectively.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.43-47
• /
• 2001

Plasma polymerized hexamethyldisiloxane thin film was fabricated by employing an inter-electrode capacitively coupled type apparatus under the following conditions : carrier gas flow rate of 11 sccm, reaction pressure of 0.1 torr, discharge frequency of 13.56 MHz and discharge power of 30∼90 W. Polymerization rate of thin film fabricated at the discharge power of 90W is 32.5nm/min. Relative dielectric constant and dielectric loss tangent of thin film shows 3.2∼3.8 and 2.6x10$\^$-3/∼4.51x10$\^$-3/ respectively in the frequency range of 1 kHz∼1 MHz. As the annealing temperature is increased, the relative dielectric constant gradually decreases while the dielectric loss tangent increases. The current density increase gradually with increasing annealing temperature and electric field. The electric conduction of the heaxamethyldisiloxane thin film shows Schottky effect.

• 대한화학회지
• /
• 제25권4호
• /
• pp.214-218
• /
• 1981

Solid인 Hexogen 존재하에서 hydroxyl-terminated polybutadiene과 isophorone diisocyanate의 혼성중합반응속도에 관하여 연구하였다. 중합반응속도는 Hexogen의 첨가량이 증가할 수록 빠르게 나타났지만, Hexogen의 촉매적 역할은 없었으며, 오직 entropy control에 의한 반응임을 밝혔다. 이 반응은 2차 반응속도법칙에 잘 일치하며, activation energy는 8.4 Kcal/mole로 거의 일정하다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.860-863
• /
• 2005

The microcapsules containing fragrant oil as functional material were prepared by in-situ polymerization with prepolymer that was made from melamine-formaldehyde (MF) as wall material of microcapsules. The effects of polymerization variables, such as the nature and concentration of surfactants, stirring rate, and stirring time, on the size and distribution of the particles were investigated. Fourier transform-infrared spectroscopy (FT-IR), thermal analysis, particle size analysis, scanning electron microscopy (SEM) observation were used to investigate the characteristics of microcapsules. Through the FT-IR and SEM analysis, we found that the prepared microcapsules were containing fragrant oil and the shape of particle was spherical. The nature and concentration of surfactants, stirring rate, and stirring time had profound effects on the particle size and particle size distribution.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.589.1-589
• /
• 2001

The aim of this study is to evaluate the effect of light intensity variation on the polymerization rate of composite resin using IB system(experimental equipment designed by Dr. IB Lee) by which real-time volumetric change of composite can be measured. Methods: Three commercial composites [Z100(Z1), AeliteFil(AF), SureFil(SF)] were photopolymerized with Variable Intensity Polymerizer unit (Bisco, U.S.A.) under the variable light intensity (75/150/225/300/375/450㎽$^2$) during 20sec.(omitted)

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.470-475
• /
• 2009

본 연구에서는 유화중합을 이용한 수분산성 아크릴계접착제의 최적의 합성조건을 구하기 위하여 주단량체로 2-EHA(2-ethylhexyl acrylate), n-BA(n-butyl acrylate), MMA(methyl metacrylate), 기능성단량체로 2-HEMA(2-hydroxylethylmethacrylate), AAc(acrylic acid), 유화제로는 음이온성 유화제인 SLS(Sodium Lauryl Sulfate), 그리고 개시제로 APS(Ammonium persulfate)를 사용하여 전환율, 입자 크기, 박리강도, 유리전이온도에 대한 유화제, 개시제, 단량체 함량의 영향을 고찰하였다. 반응온도 $82^{\circ}C$, 유화제(SLS/monomer) 3.75%, 개시제(APS/monomer) 0.612%에서 95% 이상의 전환율을 얻을 수 있었고, 유화제나 개시제의 양이 너무 많을 때는 박리접착강도가 감소하는 경향을 보였으며, 65% 2-EHA/monomer, 20% BA/monomer, 10% MMA/monomer에서 최대 전환율과 최대 박리접착강도를 얻을 수 있었다.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.129-134
• /
• 2003

불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.