• 제목/요약/키워드: polymerization phase

검색결과 267건 처리시간 0.019초

친전자성 불소치환 직접플루오르화 반응에 의한 Perfluoropolyether 중간체의 합성 (Synthesis of a Perfluoropolyether Intermediate via Electrophilic Fluorine-Substituting Direct Fluorination)

  • 윤석민;임재원;정의경;박인준;이영석
    • 폴리머
    • /
    • 제35권2호
    • /
    • pp.166-170
    • /
    • 2011
  • 본 연구에서는 hexafluoropropylene oxide(HFPO)의 개환중합 및 메틸에스테르화 반응을 통하여 $CH_3$ 말단 관능기를 가진 perfluoropolyether(PFPE) 중간체 (TP-$COOCH_3$)를 합성하고, 이를 친전자성 불소치환 직접플루오르화법을 통하여 $CF_3$ 말단 관능기를 가진 PFPE 중간체 (TP-$COOCF_3$)를 합성하였다. 또한 반응조건인 용매의 양, 혼합가스 불소 부분압 및 반응시간이 TP-$COOCF_3$ 합성에 미치는 영향에 대하여 고찰하였다. 실험결과, 플루오르화 반응은 온화한 조건에서 장시간 진행하는 것이 부반응을 최소화하여 전환율을 향상시키는 것으로 나타났다. FTIR NMR 결과로부터 TP-$COOCH_3$의 말단 $CH_3$ 관능기가 친전자성 불소치환 직접플루오르화를 통하여 $CF_3$ 관능기로 치환되어 최종 생성물인 TP-$COOCF_3$가 95.4%의 전환율로 합성된 것을 확인할 수 있었다.

임시 고정성 보철물 제작용 레진의 굽힘강도 (Flexual strength of resins for provisional fixed prostheses)

  • 최명아;안승근;조국현
    • 구강회복응용과학지
    • /
    • 제16권3호
    • /
    • pp.221-227
    • /
    • 2000
  • Provisional fixed partial dentures(FPDs) are an important part of many prosthodontic treatment procedures. These provisional fixed prostheses must fulfill biologic, mechanical, and esthetic requirements to be considered successful. Consideration of all these factors and requirements are important because provisional resin restorations may be worn over a long period to assess the results of periodontal and endodontics therapies, and also during the restorative phase of implant reconstructive procedures. This in vitro study examined flexual strength of four resins commonly used for fixed provisional prostheses. The effects of polymerization conditions were also evaluated. The four resins tested were : Caulk Temporary bridge resin(L.D. Caulk Co. Dentsply International Millford), Jet(Lang Dental Mfg. Co. Chicago. ILL. U.S.A), Alike (Coe Laboratories. Inc. Chicago. ILL. U.S.A) and Tokuso Curefast (Coe Laboratories. Inc. Chicago. ILL. U.S.A) The test specimens were 65mm long, 14mm wide, and 3.5mm thickness. 10 specimens of four resins were cured for 15 minutes at atmospheric pressure and 10 specimens of four resins were cured at an additional pressure of approximately 20 psi. A total of 80 specimens were prepared. The flexual strength was determined by three-point bending test. Data were analysed with the Paired samples T-test and Tukey student-range test Within the limitations imposed in this study, the following conclusions can be drawn : 1. Under the condition of bench curing, Caulk Temporary bridge resin showed the highest flexual strength. In decreasing order, the flexual strength of the other materials was as follows : Jet, Tokuso Curefast, Alike, and Caulk Temporary bridge resin demonstrated significantly higher strength than other resins. 2. Under the condition of pressure curing, Jet showed the highest flexual strength. In decreasing order, the flexual strength of the other materials was as follows : Caulk Temporary bridge resin, Tokuso Curefast, and Alike. There were all statistically significant differences among four resins 3. There was a statistically significant difference between bench- and pressure-cured specimens in all four materials.

  • PDF

Methyl tert-Butylether 合成에 미치는 HZSM-5 觸媒의 SiO$_2/Al_2O_3$ 比의 영향 (Effect of SiO$_2/Al_2O_3$ Ratio of HZSM-5 Catalyst on the Synthesis of Methyl tert-butylether)

  • 김건중;안화승;조병린;권이묵
    • 대한화학회지
    • /
    • 제33권1호
    • /
    • pp.135-142
    • /
    • 1989
  • HZSM-5를 觸媒로 하여 메탄올과 이소부틸렌으로부터 Methyl tertiary butyl ether(MTBE)의 氣相合成實驗을 하였으며, zeolite 觸媒의 SiO$_2/Al_2O_3$ 比 및 反應條件의 영향을 硏究하였다. 각 觸媒들은 pyridine을 吸着시켜 temperature programmed desorption(TPD) 및 IR法으로 酸點의 세기와 特性을 조사하였으며, 승온탈착실험을 통하여 각 反應物 및 生成物의 吸着特性을 검토하였다. HZSM-5의 SiO$_2/Al_2O_3$比가 증가할수록 强한 酸點의 수는 감소하여 메탄올의 脫水反應은 억제되고 MTBE에 대한 선택도가 증가하였다. MTBE에 대한 전환율과 선택도는 $i-C_4H_8$의 細孔內 확산저항에 의하여 큰 영향을 받음을 알 수 있었다. MTBE合成反應은 發熱的이어서, 전반적으로 80$^{\circ}$C의 반응온도가 合成에 적합하였다. 한편 각 觸媒上에 生成된 coke의 特性을 TG, DTA 및 IR spectrum으로 측정하였다. 침착된 coke의 量은 HY > H-Mordenite > HZSM-5順이었으며, H-Mordenite에 있어서는 누적된 coke의 양이 HZSM-5보다 현저하지는 않았으나, 細孔의 配向이 1方向性이므로 반응시간이 길어짐에 따라 심한 活性減退가 일어났다. HY는 큰 細孔을 가지고 있어 M$i-C_4H_8$의 重合이 쉽게 일어났으며, HZSM-5에 비하여 많은 coke의 참착과 빠른 活性減退를 나타내었다.

  • PDF

셀로비오스 옥타(콜레스테릴옥시카보닐)알카노에이트의 열 및 광학 특성 (Thermal and Optical Properties of Cellobiose Octa(cholesteryloxycarbonyl)alkanoates)

  • 정승용;마영대
    • 폴리머
    • /
    • 제32권3호
    • /
    • pp.230-238
    • /
    • 2008
  • 셀로비오스 옥타(콜레스테릴옥시카보닐)알카노에이트(CCBn, $n=2{\sim}8$,10, 스페이서중의 메틸렌 단위들의 수)의 열 및 광학 특성을 검토하였다. 모든 시료들은 좌측방향의 나선구조를 지닌 단방성 콜레스테릭 상들을 형성하였다. n=2 혹은 10인 CCBn은 $3{\leq}n{\leq}8$인 CCBn과 달리 콜레스테릭 상의 전 온도구간에서 반사색깔을 나타내지 않았다. 이러한 사실은 콜레스테릴 그룹에 의한 나선의 비틀림력은 콜레스테릴 그룹과 셀로비오스 사슬을 연결하는 스페이서의 길이에 민감하게 의존함을 시사한다. 액체 상에서 콜레스테릭 상으로의 전이온도($T_{ic}$)와 유리전이온도는 n이 증가함에 따라 낮아지며 홀수-짝수 효과를 나타내지 않았다. $T_{ic}$에서의 전이엔트로피는 n이 2에서 6까지 증가하나 n=7에서 급격히 감소한 후 재차 n이 8에서 10으로 증가함에 따라 증가하였다. n=7에서 급격한 변화는 곁사슬 그룹들의 배열의 차이에 의해 초래되는 것으로 생각된다. CCBn에서 관찰되는 액정 상의 열적 안정성과 질서도 그리고 광학피치의 온도의존성은 셀룰로오스 트리(콜레스테릴옥시카보닐)알카노에이트들 그리고 글루코오스 펜타(콜레스테릴옥시카보닐)알카노에이트들에 대해 보고된 결과들과 현저히 달랐다. 이들의 결과를 중합도, 글루코오스 몰 단위당의 메조겐 단위들의 수 그리고 분자들의 입체형태의 차이들의 견지에서 검토하였다.

액정폴리알릴술폰의 합성 및 기체 선택투과 특성 (Synthesis and Selective Gas Permeability of Liquid Crystalline Poly(allyl sulfone) Networks)

  • 조병욱;최재곤;김준섭;최수경
    • Elastomers and Composites
    • /
    • 제40권2호
    • /
    • pp.136-142
    • /
    • 2005
  • 주사슬에 $SO_2$를 포함하고 곁사슬에는 메소겐기을 유연격자에 연결시킨 액정 poly (allylsulfone) network를 합성하여 이들의 기체 투과도 및 선택투과 특성을 조사하였다. 곁사슬에 메톡시를 갖는 단량체I은 한 개의 알릴단위를 갖고, 단량체II는 양쪽 말단에 두개의 알릴 단위를 가져 network 형성을 제어할 수 있도록 구성되었다 가교밀도의 증가는 고분자 network 내의 분자운동을 제한시키며 단량체 II 함량이 5% 이하인 경우는 segment의 운동이 충분히 펼쳐질 수 있어 등방상으로의 상전이가 일어날수 있다. Poly(II-5 $01/I-OCH_3$ 99)의 기체 투과도는 산소($O_2$)의 경우 2.58 barrel 인데 비하여, 수소($H_2$)의 경우는 18.4 barrer로서, 선택 투과도 ${\alpha}(H_2/O_2)$가 7에 가까우며, 또 선택 투과도 ${\alpha}(H_2/N_2)$는 23.9로서 가장 높은 값을 가짐을 관찰하였다. 가교도가 10%로 증가된 Poly(II-5 $10/I-OCH_3$ 90)의 경우 선택 투과도 ${\alpha}(H_2/N_2)$는 36.8로서 가교도 증가에 따르는 선택투과도의 증가를 보여주었다.

이종 이식된 구강편평세포 암종에서 Paclitaxel ($Taxol^{(R)}$)의 항암 효과 (THE ANTICANCER EFFECT OF PACLITAXEL($Taxol^{(R)}$) IN ORAL SQUAMOUS CELL CARCINOMA XENOGRAFT)

  • 김기환;김철환;한세진;이재훈
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제28권2호
    • /
    • pp.95-110
    • /
    • 2006
  • The treatment for oral and maxillofacial carcinoma with chemotherapeutic agents is evaluated by many effective methods to reduce the tumor mass and cancer cell proliferation. However these chemotherapy have many serious side effects, such as bone marrow suppression, renal toxicity, G-I troubles. Therefore a possible approach to develop a clinically applicable chemotherapeutic agent is to screen anticancer activity of Taxol which is known to have very little side effect and have been used to breast cancer and ovarian carcinoma. Taxol is a new anti-microtubular anti-cancer agent extracted from the bark of the Pacific yew, Taxus brevifolia. Paclitaxel(Taxol) acts by promoting tubulin polymerization and over stabilizing microtubules agianst depolymerization. Despite the constant improvements of methods of the cancer treatment especially chemotherapy, the rate of cancer metastasis and recurrent are not decreased. Thus the investigation of new drug which have very little side effect and a possible clinically application continues to be a high priority. Considering that the Taxol have shown very effective chemotherapeutic agent with relatively low toxicity in many solid tumors, it deserves to evaluate its efficacy in oral squamous cell carcinoma. In this study, to investigate the in-vivo and in-vitro anti-cancer efficacy of Taxol in oral squamous cell carcinoma and lastly, the potency of Paclitaxel in the clinical application for oral cancer was evaluated. In vivo study, after HN22 cell line were xenografted in nude mice, the growth of tumor mass was observed, 3 mg/Kg taxol was injected intraperitoneally into nude mice containing tumor mass. The methods of these study were measurement of total volume of tumor mass, histopathologic study, immunohistochemical study, drug resistance assay, growth curve, MTT assay, flow cytometry, cDNA microarray in vivo and in vitro. The results were obtained as following. 1. The visual inspection of the experimental group showed that the volume of the tumor mass was slightly decreased but no significant difference with control group. 2. Ki-67 index was decreased at weeks 4 in experimental group. 3. Microscopic view of the xenografted tumor mass showed well differentiated squamous cell carcinoma and after Taxol injection, some necrotic tissue was seen weeks 4. 4. The growth curve of the tumor cells were decreased after 1day Taxol treatment. 5. According to the MTT assay, HN22 cell line showed relative drug resistancy above $5\;{\mu}g/ml$ concentrations of Taxol. 6. In drug resistance assay, the decrease of cell counts was seen relatively according to concentration. 7. In Flow cytometry, G2M phase cell arrests were seen in low concentration of the Taxol, while S phase cell arrests were seen in high concentration of the Taxol. 8. Using cDNA microarray technique, variable gene expression of ANGPTL4, TXNRD1, FAS, RRAGA, CTGF, CYCLINEA, P19, DUSP5, CEBPG, BTG1 were detacted in the oral squamous cell carcinoma cell after taxol treatment. In this study paclitaxel is effective against oral squamous cell carcinoma cell lines in vitro, but week effect was observed in vivo. So we need continuous study about anticancer effect of taxol in vivo in oral squamous cell carcinoma.

스마트 윈도우용 가교 열감응성 폴리(N-이소프로필아마이드) 겔 소재의 제조 및 특성 - 물/글리세롤 혼합용매 중의 글리세롤 함량의 영향 - (Preparation and Properties of Crosslinked Thermo-responsive Poly(N-isopropylacrylamide) Gel Materials For Smart Windows - Effect of Glycerol Content in Water/Glycerol Solvent -)

  • 박재형;김일진;이동진;심재학;송민섭;이영희;유중환;김한도
    • 청정기술
    • /
    • 제24권2호
    • /
    • pp.112-118
    • /
    • 2018
  • 온도 변화에 따라 상 전이를 나타내는 열 감응성 고분자는 외부 온도 감응으로 태양광 투과 조절이 가능하므로 스마트 윈도우용 소재로 적용 가능하다. 넒은 온도 범위에서 사용 가능한 스마트 윈도용 열감응성 고분자의 개발은 바람직하다. 고 성능스마트 윈도우용 소재를 얻기 위하여, 단량체 N-isopropylacrylamide, 가교제 N, N'-methylenebisacrylamide (MBAm), 산화개시제 ammonium persulfate (APS)/촉매 tetramethylene diamine 및 혼합용매(물/글리세롤)을 사용하여 3차원의 열감응성(thermoresponsive) poly(N-isopropylacrylamide) (PNIPAm) 겔을 제조하였다. 본 연구에서는 혼합용매 중의 글리세롤의 함량이 가교된 PNIPAm 겔 필름의 하한임계온도(low critical solution temperature, LCST), 어는점 및 태양광의 투광도에 미치는 영향을 조사하였다. 글리세롤 함량이 0 wt%에서 10 wt%로 증가하면 PNIPAm 겔 필름의 LCST/어는점은 각각 $34.3/6.3^{\circ}C$에서 $28.2/-6.5^{\circ}C$로 감소함을 알 수 있었다. LCST보다 낮은 $25^{\circ}C$에서는 본 연구에서 합성한 모든 PNIPAm 겔 필름은 투명(광 투과)하지만 LCST보다 높은 $45^{\circ}C$에서는 불투명하다는 것을 알 수 있었다. 이러한 결과는 본 연구에서 합성한 PNIPAm 겔 소재는 $-6.5^{\circ}C$ 부근에서도 스마트 윈도우용 소재로 활용할 가능성이 높음을 알 수 있다.