• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.453-458
• /
• 2000

The permeability of oxygen and nitrogen was investigated from the polymeric LB films containing imidazole-metal ion complexes and compared with its corresponding cast films on porous membrane filters. The amphiphilic polymer, poly(N- (2-(4-imidazolyl)ethyl)-maleimide-alt-1-octadecene) (IM-O), was synthesized by reaction of poly(maleic anhydride-alt-1-octadecene) with histamine. The IM-O nonolayer showed high stability on Fe (III) ion-containing subphase. The molecular structure in the LB films was investigated by means of FT-IR spectroscopy. The metal ion concentration incorporated into the LB films was determined by means of XPS measurements. The mechanical stability and uniformity of the LB films on porous substrates were indirectly evidenced by SEM observation. The LB and cast films showed more or less higher selectivity toward nitrogen, and high permeability was found to both the oxygen and nitrogen.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.134-144
• /
• 1990

In order to examine that what kind of system correlated with cadmium detoxification mechanism in Klebsiella aerogenes ATCC 10031, we tried to investigate the effect of phosphate upon the detoxification and also elucidate whether the cadmium phosphate and/or polymeric Cd-Pi complex is formed actually in cell or not. As the results, it was shown that growing pattern had long lag adaptive phase of 12 hr to 24 hr, at the concentrations of 0.02 mM and 0.08 mM cadmium, respectively. Cadmium was accumulated more highly in the fraction of cell wall and membrane than in those of cytoplasm. In case of phosphate starving cells added cadmium, inorganic polyphosphate system was primarily correlated with Cd-detoxification during the lag phase for the accommodation to cadmium, on the other hand, Cd:Sulfide complex system secondarily correlated it during the stationary phase. These results implied that polyphosphate system and Cd:sulfide complex system, these two systems were operated compensatively each other. Considering the results obsdrved with EM and examined tha changes of sulfide and polyphosphate amount, it was reflected that Cd:S complex was located at the cell surface. In the results of $in-vivo^{31}$P NMR spectra in the cells with cadmium pressure, several phosphate signals arose newly from the polyphosphate region with moving chemical shift of it. This phinomenon strongly implied the actual existence of Dd:Pi comples and /or Cd:poly-P complex in the cell and also the cellular compartmentalization of cadmium detoxifying mechanism.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.142-154
• /
• 2012

In order to remove $CO_2$ from the DME plant process, we investigated the composite membrane with rubbery polymers as the separation layer and its separation performance of $CO_2$ and $H_2$. Hollow fiber membranes for supporting layer were prepared by solution spinning method. In case of using PDMS as a separation layer, the composite membranes showed the permeation rates of $CO_2$ were over 300 GPU and minimum $CO_2/H_2$ selectivitties were 4.3 and in case of using PEBAX as a separation layer, the composite membranes showed the permeation rates of $CO_2$ were over 120 GPU and minimum $CO_2/H_2$ selectivities were 5.

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.130-135
• /
• 2012

We present a method of graphene synthesis with high thickness uniformity using the thermal chemical vapor deposition (TCVD) technique; we demonstrate its application to a grid supporting membrane using transmission electron microscope (TEM) observation, particularly for nanomaterials that have smaller dimensions than the pitch of commercial grid mesh. Graphene was synthesized on electron-beam-evaporated Ni catalytic thin films. Methane and hydrogen gases were used as carbon feedstock and dilution gas, respectively. The effects of synthesis temperature and flow rate of feedstock on graphene structures have been investigated. The most effective condition for large area growth synthesis and high thickness uniformity was found to be $1000^{\circ}C$ and 5 sccm of methane. Among the various applications of the synthesized graphenes, their use as a supporting membrane of a TEM grid has been demonstrated; such a grid is useful for high resolution TEM imaging of nanoscale materials because it preserves the same focal plane over the whole grid mesh. After the graphene synthesis, we were able successfully to transfer the graphenes from the Ni substrates to the TEM grid without a polymeric mediator, so that we were able to preserve the clean surface of the as-synthesized graphene. Then, a drop of carbon nanotube (CNT) suspension was deposited onto the graphene-covered TEM grid. Finally, we performed high resolution TEM observation and obtained clear image of the carbon nanotubes, which were deposited on the graphene supporting membrane.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3175-3180
• /
• 2014

A potentiometric sensor based on the 1-benzyl-3-(4-nitrophenyl) thio-urea was synthesized and tested as an ionophore in PVC based membrane sensor towards $SCN^-$ ions. This membrane exhibits a linear stable response over a wide concentration range ($1.0{\times}10^{-5}$ to $1.0{\times}10^{-2}M$) with a slope of -59.2 mV/dec., a detection limit of ${\log}[SCN^-]=-5.05$, and a selectivity coefficient for thiocyanate against perchlorate anion of ${\log}K^{pot}_{SCN^-j}=-0.133$. The selectivity series of the membrane is as follows: $SCN^-$ > $ClO_4{^-}$ > $I^-$ > $NO_3{^-}$ > $HSO_3{^-}$ > $Cl^-$ > $HSO_4{^-}$ > $F^-$ > $CH_3COO^-$ > $HCO_3{^-}$ > $Br^-$ > $H_2PO_4{^-}$ > $SO{_3}^{2-}$ > $SO{_4}^{2-}$ > $CO{_3}^{2-}$. The proposed electrode showed good selectivity and a good response for the $SCN^-$ ion over a wide variety of other anions in pH 6.0 buffer solutions and has a fast response time of about < 5s. The influences of the membrane by pH, ionophore, and plasticizer were studied.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.479-488
• /
• 2011

Nanofiltration was performed with polyaluminium chloride solutions at different pH conditions to understand effects of inorganic compounds on aluminum hydrolysis products, i.e., three distinctive groups of aluminum species: polymeric Al at low pH; $Al(OH)_3$ at neutral pH; and ${Al(OH)_4}^-$ at high pH. The PACl solution was prepared to be approximately 4.0mM and adjusted to the designated pH. The influence of inorganic compounds on Al species fouling was investigated with 4.9mM $CaCl_2$ and 3.5mM $MgSO_4$ because $Ca^{2+}$, $Mg^{2+}$, $Cl^-$, ${SO_4}^{2-}$ are the most common inorganics in the drinking water. NF membrane fouling was measured by flux decline rate. The impact of $CaCl_2$ was not significant on the individual Al hydrolysis products fouling. However, the flux decline rate was drastically changed in the presence of $MgSO_4$. The concentration of particulate matters was considerably increased possibly due to interaction between Al species and ${SO_4}^{2-}$ where $MgSO_4$ was introduced. The particulates were accumulated on the membrane and enhanced the hydraulic resistance of the cake layer. In addition, conductivity removal of the membrane was decreased when Al-hydroxide was dominant due to reduction of membrane surface charge. The rejection of $Ca^{2+}$and $Mg^{2+}$ were considerably different, which implys that composition of inorganics paly a role on conductivity removal.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.168-180
• /
• 2023

H₂ generation from renewable sources is crucial for ensuring sustainable production of energy. One approach to achieve this goal is biohydrogen production by utilizing renewable resources such as biomass and microorganisms. In contrast to commercial methods, biohydrogen production needs ambient temperature and pressure, thereby requiring less energy and cost. Biohydrogen production can reduce greenhouse gas emissions, particularly the emission of carbon dioxide (CO₂). However, it is also associated with significant challenges, including low hydrogen yields, hydrodynamic issues in bioreactors, and the need for H₂ separation and purification methods to obtain high-purity H₂. Various technologies have been developed for hydrogen separation and purification, including cryogenic distillation, pressure-swing adsorption, absorption, and membrane technology. This review addresses important experimental developments in dense polymeric membranes for biohydrogen purification.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.527-532
• /
• 2005

Ionic polymer metal composites (IPMC) are soft polymeric smart materials having large displacement at low voltage in air and water. The polymeric electrolyte actuator consists of a thin and porous membrane and metal electrodes plated on both faces, in impregnation electro-plating method. The response and actuation of actuator are governed. Among many factors governing the activation and response of IPMC actuator, the surface electrode plays an important role. In this study, the well-designed modification of electrode surface was carried out in order to improve the chemical stability well as electromechanical characteristics of the IPMC actuator. We employed Ion Beam Assisted Deposition (IBAD) method to prepare the topologically homogeneous thin surface electrode. After roughing the surface of Nafion membrane in order to get a larger surface area, the IPMC was prepared by impregnation for electro-plating and re- coating on the surface through traditional chemical deposition, followed by an additional surface treatment with high conductive metals with IBAD. It was observed that our IPMC specimen shows the enhanced surface electrical properties as well as the improved actuation and response characteristics under applied electric field.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.176-184
• /
• 2008

Nano-porous ceramic membranes was synthesized by the sol-gel method. Gas permeation of hydrogen and nitrogen was determined by single composition gas. Pore size $0.1{\mu}m$ and porosity 32% of flat type ${\alpha}-Al_2O_3$ substrate was manufactured. An intermediate ${\gamma}-Al_2O_3$ layer with pore size of 4 nm was formed by dip-coating. Polymeric silica sol was synthesized by acid catalyzed hydrolysis and condensation of tetra-ethyl-ortho-silicate. Supported membranes on alumina were prepared by dipping and calcining. He, $N_2$ permeation experiments with nanoporous sol-gel modified supported ceramic membranes were peformed to determine the gas transport characteristics. $He/N_2$ permselectivity around $100{\sim}160$ and helium permeation in the order of $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ were measured in the temperature range of $303{\sim}363K$.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.200-206
• /
• 1998

The effect of surface tension and viscosity of polymer solution on the thickness of water casting membranes was studied. Spreading of polymer solutions on water surface was governed by the surface tension and viscosity of the polymer solution. The thickness of water casting membrane was affected by these two factors. The properties, mentioned above, were proportional to the polymer concentration. The order of magnitude in surface tension was PVC>PS>CA and that of viscosity was CA>PS>PVC. The difference of surface tension between water and polymer solution acts as driving force for spreading of polymer solution, but the viscosity as resistance. The thickness of polymeric membrane prepared by water casting was PS>CA>PVC. The order of membrane thickness was not as same as that of surface tension. This phenomena were due to the viscosity which acts as more effective spreading resistance than the surface tension.