• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.292-295
• /
• 2003

In this study, an ultrasonic transducer is fabricated with 1-3 type composite resonators. Pulse-echo responses of an ultrasonic transducer are investigated in underwater dependent on the variable designated water-level. LED Output signals of a level limit with changing a water level is obtained by the 1-3 type self-made composite transducer and electric measuring unit. LED is turned on at above the up-limit level with increasing a water level, and LED is turned on at less than the down-limit level with decreasing a water level. There was good agreement between the virtual level and output LED signal by using the self-made water-detecting system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.479-484
• /
• 2000

An experimental study to investigate the structural performance of reinforced concrete beams repaired by Polymer Cementitous Mortar in the tension zone is described. Preliminary trials with beams in which beams tensile reinforcing steel was exposed over 100%, 80% and 60% of their length have led to tests on $5\times25$cm beams over a 200cm span to examine the experimental parameter. Attention is concentrated upon overall bending capacity, deflection and crack development of repaired beams.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.129-130
• /
• 2000

The emission color stability of poly(fluorene) derivatives upon thermal annealing or passage of current in an electroluminescent device is affected by the structure of the main chain polymer unit and particularly by the polymer chain end substituents. Proper attention to these features leads to colorfast blue emission in both photo- and electoluminescence. Furthermore, the spectral emission characteristics can be tuned by the incorporation of various comonomers. Preliminary single layer device studies validate the potential utility of poly(fluorene) homo and copolymers for OLED applications.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.28-28
• /
• 2002

The hydrothermal reaction of Ni(NO₃)·6H₂O with 4.4'-oxybis(benzoic acid) (OBCH₂) and trans-1,2-bis(4-pyridyl)ethylene (bipyen) led to the formation of a 3-dimensional coordination polymer with the empirical formular of [Ni(OBC)(bipyen)]·H₂O. The complex has been characterized by X-ray diffraction, elemental analysis, TGA, IR, X-ray power diffraction (XRPD), It crystallized triclinic space group P1 with a = 9.280(2)Å., b = 11.317(4) Å, c = 12.442(3) Å, Z = 2, R (ωR₂) = 0.0346 (0.0846).

• Prospectives of Industrial Chemistry
• /
• v.24 no.1
• /
• pp.25-31
• /
• 2021

페로브스카이트(perovskite) 결정 구조를 갖는 물질은 매우 뛰어난 광학적, 전기적 특성을 갖고 있으므로, 최근 들어 태양전지, LED, 광검출기 등의 다양한 분야에서 기술적 한계를 극복할 수 있는 가능성을 제시하고 있다. 이러한 페로브스카이트 소재를 폭넓은 분야에서 실용적으로 활용하기 위해서는 소재 자체가 갖고 있는 뛰어난 특성을 지속할 수 있는 안정성이 향상된 기술의 접목이 무엇보다 절실히 필요한 실정이다. 본 기고문에서는 페로브스카이트 소재의 실용화를 앞당기기 위해 최근 활발히 연구가 진행되고 있는 페로브스카이트-고분자 복합소재 기술 개발 및 응용 분야에 대해 간략히 소개하고자 한다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.274-278
• /
• 2001

Polymer membranes composed of N, N-dimethylaminoethyl methaccrylate(DMAEMA) and acrylamide(AAm)(or ethyl acrylamide(EAAm) were prepared to demonstrated the thermo-control of solute permeation. Poly DMEMA has a lower critical solution temperature(LCST) at around 50$\^{C}$ in water, With the copolymerization of DMAEMA with AAm (or EAAm) a shift in the LCST to a lowere temperature was observed, probably due to the formation of hydrogen bonds between the amide and N-N-dimethylamino groups. However, the temperature-induced phase transition of poly(DMAEMA-co-EAAm) did not show a similar trend to that of poly(DMAEMA- co-AAm) in the gel state. The hydrogen bonds in poly(DMAEMA-co-EAAm) were significantly disrupted with the formation a gel network, which led to a difference in the swilling behavior of polymer gels in response to temperature. To apply these polymers to temperature-sensitive sol-ute permeation, polymer membranes were prepared. The permeation pattern of hydrocortisone, used as the model solute, was explained based on the temperature-sensitive swelling behavior of the polymer membranes.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1616-1622
• /
• 2001

Fiber composite materials are widely used in aerospace industries due to their high specific strength and stiffness. Especially, the increasing use of polymer composite materials for injection of automobile components has led to a considerable interest in the application of stress pattern analysis by thermal emission to these composite materials. Therefore, in this study the microstructure of glass fiber orientation at the parent and weld line of polycarbonate is observed by a light transmission. And we also investigate a stress concentration model of a notch including short glass fibers. Especially the polymer injection weld reorients the fiber to suggest a new method for the evaluation of inhomogeneous deformation.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.62-65
• /
• 2008

The morphology of the $D_2O$-induced reverse micellar structure of an amphiphilic block copolymer of poly( ethylene oxide )-b-poly(propylene oxide )-b-poly( ethylene oxide )($EO_{76}PO_{29}EO_{76}$) was investigated in hydrophobic media by small angle neutron scattering (SANS). Increasing $D_2O$ in the styrene/divinylbenzene solution of $EO_{76}PO_{29}EO_{76}$ led to a change in morphology of the reverse micelles from a short range ordered molecular aggregate to a hexagonally arranged micelle, and further to a spherical micelle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.920-923
• /
• 2013

In this paper, the characteristics of a carbon nanotube composite heat sink proposed to replace the advanced Al heat sinks for LED lighting devices were studied. Proposed CMP-PLA heat sink was made by mixing 20~70 wt% carbon nanotube, 20~70 wt% bio-degradable polymer of melt-blended PLA (poly lactic acid) and PBS (poly butylene succinate) and PLA nucleating agents composed of the mixture of soybean oil and biotites, at $150{\sim}220^{\circ}C$ with 1,000~1,500 rpm. Optical and electric characteristics of 7.5 W LED lighting devices using heat sinks with such prepared CMP-PLA were investigated. And, the properties of the heat, which was not released from the CMP-PLA type heat sinks, was also investigated. The color temperature of LED lighting devices using the CMP-PLA heat sinks was 5,956 K, which is x= 0.32 and y= 0.34 in the XY chromaticity, and the color rendering index was 75. The luminous flux and the luminous efficiency of LED lighting devices using the CMP-PLA heat sinks was 540.6 lm and 72.68 lm/W respectively. Measured initial temperature of the heat sinks was $27^{\circ}C$, and their temperature increased as time to be saturated at $52^{\circ}C$ after an hour.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.761-767
• /
• 2012

The polycarbonate (PC)-based optical diffusers for direct-lit LED backlight unit were prepared by using extrusion compounding followed by compression molding process. The application of inorganic porous silica particles as a diffusing agent in addition to conventional poly(methyl methacrylate) (PMMA) beads was attempted, and the optical, thermal, and mechanical properties of the prepared diffusers were investigated. The morphological observations revealed that the diffusing agents could be uniformly dispersed in the PC matrix without agglomeration by high shear stress generated during extrusion process. The incorporation of the porous silica particles mixed with PMMA beads remarkably enhanced the luminance uniformity with respect to both location and view angle for the diffuser, while minimizing the reduction in the absolute luminance, as compared with the diffuser containing only PMMA beads. In addition, thermal and mechanical properties of the diffusers were shown to be improved upon addition of the porous silica particles.