• Journal of Information Display
• /
• 제8권4호
• /
• pp.5-9
• /
• 2007

We demonstrate an optically compensated bend (OCB) cell with pixel-isolating polymer wall. The polymer wall is formed by anisotropic phase separation of LCs and UV-curable polymer. The fabricated cell is initially in ${\pi}-twisted$ state so that it shows uniform and fast bend transition without any transition nucleus. The proposed cell has lower driving voltage than conventional OCB cell. Also, the polymer wall provides mechanical stability, hence preventing distortion of display image from external pressure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.207-210
• /
• 2007

We fabricated an optically compensated bend cell with pixel-isolating polymer wall. The polymer wall was formed by phase separation of LCs and UVcurable polymer. The fabricated cell had initially ${\pi}-twist$ state. It showed low driving voltage, wide viewing angle and fast response properties. Also, polymer wall provided the mechanical stability preventing distortion of a display image from pressure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1130-1131
• /
• 2006

Here we report the effect of photo-spacer and polymer wall on the mechanical stability of the polymer-stabilized ferroelectric liquid crystal (PSFLC) system. A better bending tolerance of the PSFLC cell was obtained when the polymer wall was formed parallel to the rubbing direction. In addition, the effect of the distance between photo-spacer columns as well as that of the distance between polymer wall columns on the mechanical stability of the liquid crystal was examined.

• 한국화재소방학회논문지
• /
• 제5권2호
• /
• pp.11-20
• /
• 1991

Dilute polymer solutions were injected into turbulent pipe flow of a Newtonian fluid. The local drag reduction for injection of polymer solution at the pipe wall was larger than that at centerline. From the above result we may conclude that the polymer additives were found to influence the flow in the neighborhood of the wall. The effects of the injection apparatus on the local drag reduction are small compared to the drag-reducing effects. The extent of drag reduction increased with polymer concentration and injection flow rate, and the maximum drag reduction obtained were 47% for Polyox Coagulant and 35% for Separan AP-273. In respect to polymer degradation, the polyacrylamide showed better shear stability than the polyethyleneoxide and thus the former expected to have a sharper molecular weight distribution.

• Korea-Australia Rheology Journal
• /
• 제13권3호
• /
• pp.141-148
• /
• 2001

In this research, experimental studies leave been performed on the hydrodynamic interaction between a spherical particle and a plane wall by measuring the force between the particle and wall. To approach the system as a resistance problem, a servo-driving system was set-up by assembling a microstepping motor, a ball screw and a linear motion guide for the particle motion. Glycerin and dilute solution of polyacrylamide in glycerin were used as Newtonian and non-Newtonian fluids, respectively. The polymer solution behaves like a Boger fluid when the concentration is 1,000 ppm or less. The experimental results were compared with the asymptotic solution of Stokes equation. The result shows that fluid inertia plays all important role in the particle-wall interaction in Newtonian fluid. This implies that the motion of two particles in suspension is not reversible even in Newtonian fluid. In non-Newtonian fluid, normal stress difference and viscoelasticity play important roles as expected. In the dilute solution weak shear thinning and the migration of polymer molecules in the inhomogeneous flow field also affect the physic of the problem.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.484-487
• /
• 2005

In order to find out LC cell spacing method suitable for flexible cholesteric LCDs with high mechanical stability, we carried out bending and mechanical shock tests by using various spacing techniques: bead spacer, photo spacer, polymer wall with bead spacer and polymer wall with photo spacer. As a result, it was found that the spacing method using polymer wall incorporated with photo spacer is the best for flexible cholesteric LCDs in terms of mechanical stability. The investigation is discussed in detail.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1132-1134
• /
• 2006

In this research, we examined the correlation between the polymer wall boundary condition and the dynamic/ memory behavior of the ferroelectric liquid crystal (FLC) molecules. It was shown that the polymer wall perpendicular to the rubbing direction induces asymmetric switching to the rubbing direction and induce smaller cone angle angle of LC. On the contrary, in the cell with polymer wall parallel to the rubbing direction, the FLC molecules are oriented in the rubbing direction and shows symmetric switching and has larger cone angle. Memory behavior of each cell has strong correlation with the dynamic state of the FLC molecules. Response time of each cell was also examined.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.340-347
• /
• 1996

Recent years, many items in construction industry are produced by precasting from factories. Among the precasting items which are cost effective by virtue of standardization of size and reduction of construction time is the load bearing wall. However, due to many reasons inherent in concrete materials, often it was found that the member did not meet the designed strength after construction. In this case, the wall had to be ether replaced or reinforced somehow. Since replacement is almost impossible due to budget and schedule, reinforcement is a preferred choice in many cases. Therefore, objective of this study was to evaluate reinforcement of the wall using polymer composites. Flexural strength and axial compressive strength were evaluate for the wall before and after reinforcement. The polymer composite reinforcement was found to be very effective in improving these strengths.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.8-11
• /
• 2005

A flexible reflective cholesteric liquid crystal display (ChLCD) is fabricated on plastic substrates by using the pixel isolation method. The polymer walls between pixels and the polymer layers in the pixels are formed by two-step UV irradiation. Electro-optical response of the ChLCD with polymer wall and layer is studied and compared with conventional bistable ChLCD cells.

• 한국태양에너지학회 논문집
• /
• 제39권5호
• /
• pp.65-78
• /
• 2019

In this study, we investigated the paraffin encapsulation using double-walled encapsulation technique. The first encapsulation used methyl methacrylic acid as the main component in acrylic polymer and the second encapsulation used melamine polymer. Particles size and distribution of the capsules were analyzed using scanning electron microscopy. In the first encapsulation, the stable capsules were obtained at 67% of phase change material ratio to methyl methacrylic acid monomer and the size of the capsule was from 0.2 to $0.3{\mu}m$. In the second encapsulation, the size of the capsules was almost the same with those capsules prepared in the first encapsulation. The particle size of single wall and double wall was about $0.3{\mu}m$. As a result of the encapsulation of paraffin using double-walled encapsulation technique, it was confirmed that the particle size was determined in the process of encapsulating using the acrylic polymer at the first wall material, and the physical and thermal stability of the capsules were imparted using melamine at the secondary wall material.