• Carbon letters
• /
• 제24권
• /
• pp.28-35
• /
• 2017

We demonstrated an effective way of preparing melt spinnable mesophase pitches via catalytic hydrogenation of petroleum residue (fluidized catalytic cracking-decant oil) and their subsequent thermal soaking. The mesophase pitches thus obtained were analyzed in terms of their viscosity, elemental composition, solubility, molecular weight, softening point and optical texture. We found that zeolite-induced catalytic hydrogenation under high hydrogen pressure contributed to a large variation in the properties of the pitches. As the hydrogen pressure increased, the C/H ratio decreased, and the solubility in n-hexane increased. The mesophase pitch with entirely anisotropic domains of flow texture exhibited good meltspinnability. The mesophase carbon fibers obtained from the catalytically hydrogenated petroleum residue showed moderate mechanical properties.

• Carbon letters
• /
• 제15권3호
• /
• pp.162-170
• /
• 2014

Pitch is an attractive raw material for carbon fiber precursors due to its low cost stemming from its availability as a residue of coking and petroleum processes. Ford Motor Company reported a carbon fiber target price of $11.0/kg by using a fast cycle-time manufacturing method with carbon fiber in an inexpensive format, allowing for an average retail price of gasoline of $3.58/gallon. They also recommended the use of carbon fiber with strength of 1700 MPa, modulus of 170 GPa, and 1.5% elongation. This study introduced a ca. $5.5{\mu}m$ carbon fiber with 2000 MPa tensile strength obtained from a precursor through simple distillation of petroleum residue. Petroleum pitch based carbon nanofibers prepared via electrospinning were characterized and potential applications were introduced on the basis of their large specific surface area and relatively high electrical conductivity.

• Bulletin of the Korean Chemical Society
• /
• 제17권1호
• /
• pp.16-19
• /
• 1996

The bulk photopolymerization of methyl methacrylate (MMA) with disilanes such as 1,2-diphenyldisilane and 2-phenyl-1,3-disilapropane was carried out to yield poly(MMA)s containing the corresponding disilyl moiety presumably as an end group. It was found that while the polymerization yields and the polymer molecular weights decreased as the relative disilane concentration increased, the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increment of molar ratio of disilane over MMA. The photopolymerization of MMA with 2-phenyl-1,3-disilapropane produced higher-molecular-weight polymer with lower TGA residue yield when compared to the photopolymerization of MMA with 1,2-diphenyldisilane. The disilanes seemed to significantly influence on the photopolymerization as both chain initiation and chain transfer agents.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1264-1268
• /
• 1997

The poly(methylsilene) (1) was modified with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalyst and with the group 6 metal carbonyl M(CO)6 (M = Cr, Mo, W) catalyst, producing the highly cross-linked isoluble polymer and the lowly cross-linked soluble polymer, respectively. An interrelationship between molecular weight and percent ceramic residue yield with metal within the respective group was not found. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weight and lower percent ceramic residue yield than the polymers modified with the group 6 metal carbonyl catalysts do. The catalytic activity of group 4 metallocene combinations appears to be higher at ∼100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls. The pyrolysis of the modified 1 yielded SiC ceramic.

• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.291-294
• /
• 2000

The bulk photopolymerization of methyl methacrylate(MMA) with bis(silane)s such as 1,4-$C_6H_4(SiH_3)_2$ (1) and 1,4-$C_6H_4(SiH_2Me)_2$ (2) was performed to produce poly(MMA)s possessing the corresponding bis(silyl) moiety as an end group. For the bis(silane)s, while the polymerizaiton yields and the polymer molecular weights decreased, the TGA residue yields and the relative intensities of Si-H IR stretching bands increased as the relative bis(silane) concentration over MMA increased. The polymerizaion yield, polymer molecular weight, and TGA residue yield of MMA with 1 were found to be higher than those with 2. The bis(silane)s appears to influence significantly upon the photopolymerization of MMA as both chain initiation and chain transfer agents.

• 자연과학논문집
• /
• 제5권2호
• /
• pp.63-73
• /
• 1992

There are many methods of obtaining butadiene described in the literature. In the america it is produced largely from petroleum gases, i.e., by catalytic dehydrogenation of butene of butene-butane mixtures. Butadiene can be recovered from the $C_4$ residue of an olefin plant by distilling off a fraction containing most of the butadiene, catalytically hydrogenating the higher acetylenes to olefins and separating the product from other olefins and isobutane by extraction. Also it can be obtained by cracking naphtha and light oil. Among the individual dienes of commercial importance, 1, 3-butadiene is of first importance. It is used primarily for the production of polymers.In the present paper, it was investigated for a effect of the formation and the growth inhibition of popped corn polymer in butadiene extraction unit. As a result of study, inhibitors, $NaNO_2$ and TBC were good effective for inhibition of the formation and growth in popcorn polymer. The rational formula of popcorn polymer obtained was $(C_4H_6)_x$.

• 전자공학회논문지A
• /
• 제30A권1호
• /
• pp.31-43
• /
• 1993

Thermal behavior and $O_{2}$ plasma effects on residue and penetrated impurities formed by reactive ion etching (RIE) in CHF$_{3}$/C$_{2}$F$_{6}$ have been investigated using X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) techniques. Decomposition of polymer residue film begins between 200-300.deg. C, and above 400.deg. C carbon compound as graphite mainly forms by in-situ resistive heating. It reveals that thermal decomposition of residue can be completed by rapid thermal anneal above 800.deg. C under nitrogen atmosphere and out-diffusion of penetrated impurities is observed. The residue layer has been removed with $O_{2}$ plasma exposure of etched silicon and its chemical bonding states have been changed into F-O, C-O etc.. And $O_{2}$ plasma exposure results in the decrease of penetrated impurities.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.329-333
• /
• 1998

The major classes of antimicrobial agents for textiles include organo-metallics, phenols, quaternary ammonium salts, and organo-silicones. These finishes should be durable, have selective activity towards undesirable organisms, be compatible with other finishes and dyes, and be nontoxic to man [1]. Chitosan, as a deacetylated derivative of chitin, is a natural, non-toxic and biodegradable polymer. Chitosan is also known as an antimicrobial polysaccharide due to antimicrobial action of the amino group at the C-2 position of the glucosamine residue.(omitted)

• 한국표면공학회지
• /
• 제32권2호
• /
• pp.93-99
• /
• 1999

Surface polymer layer formed on the silicon wafer during the oxide overetching using $C_4F_8$/ helicon wave plasmas and their characteristics were investigated using spectroscopic elipsometry, X-ray photoelectron spectroscopy, and secondary ion mass spectrometry. Overetch percentage and dc-self bias voltage were varied to investigate the effects on the characteristics of the polymers remaining on the overetched silicon surface. The increase of bias voltage from -80 volts to -120 volts increased the C/F ratio and carbon bondings such as C-C, $C-CF_x$/, and C-Si in the polymer while reducing the thickness of the polymer layer. However, the increase of the overetch percentage from 50% to 100% did not change the composition of the polymer layer and the carbon bondings in the polymer layer remained same even though it increased the polymer thickness. The polymer layer formed at the higher dc-self bias voltage was more difficult to be removed by the following various post-etch treatments compared to that formed at the longer overetch percentage.

• Macromolecular Research
• /
• 제8권1호
• /
• pp.12-18
• /
• 2000

Six aromatic polyesters with ether-linkages were prepared from 4,4'-oxybis(benzoic acid) and naphthalenediol (ND) isomers which were 1,4-, 1,5-, 1,6-, 2,3-, 2,6- and 2,7-derivatives. The solution viscosity numbers ranged from 0.23 to 0.65 dL/g. The glass transition temperatures ranged from 142 to 179$\^{C}$. The initial decomposition temperatures were all above 400$\^{C}$, and the residue weights at 600$\^{C}$ were in the range of 50-64%. Only the polyesters derived from 1,5- and 2,6-NDs, which have a linear linking mode, were found to be semicrystalline and could form thermotropically nematic phase. Multiple melting phenomena and annealing of the polyester derived from 1,5-ND and related polymers are described. The experimental results show that the polyester derived from 1,4-ND of linear shape was amorphous and non-liquid crystalline. Particularly, the polyester derived from 2,3-ND could form a smectic mesophase as banana-shaped molecules, and this is ascribed to the C/sub_2v/ symmetry where highly kinked molecules are packed in the same direction.