• 한국재료학회지
• /
• 제24권9호
• /
• pp.474-480
• /
• 2014

Process conditions for the impregnation of polycarbosilane preceramic polymer into SiC-based composites were investigated. Two kinds of preceramic polymer (PCP) was impregnated into SiC-fiber fabrics with different solvents of n-hexane and divinylbenzene (DVB). Both microstructural observations and mechanical tests were conducted to evaluate the impregnation. The matrix phases were particulated in the case of hexane solvents. Apparent relative density of the matrix was about 78.8%. The density of matrix was increased to about 96.1-98.8% when the DVB was used; however, brittle fracture was observed during a bending test. The modulus of toughness was less than $0.74J/m^3$. The fabric impregnated with a mixed PCP-dissolved solution showed intermediate characteristics with relative high density of filling (apparent density of ~96.1%) as well as proper bending behavior. The modulus of toughness was increased to about $5.31J/m^3$. The composites developed by changing the precursor and solvent suggested the possibility of fabricating SiCf/SiC composites without a fiber to matrix interphase coating.

• 폴리머
• /
• 제35권4호
• /
• pp.296-301
• /
• 2011

본 연구는 고내구성을 가진 고분자 전해질막을 제조하는 것으로 연료전지에 적용하기 위하여 poly(vinyl alcohol)을 주사슬부로 하여 poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA)를 다공성 polyethylene(PE) 막에 함침시켜 막을 제조하였다. 제조된 막을 함수율, 접촉각, FTIR, 이온교환용량, 이온전도도 메탄올 투과도 열 중량분석, 탄성계수 등의 측정을 통해 친수성 고분자가 함침된 막의 특성평가를 실시하였다. 접촉각 측정과 FTIR 분석을 통해 PE 막에 함침된 막에서의 친수성기의 존재를 확인하였다. PSSA-MA의 함량이 10 wt% 함침된 막의 경우, 이온교환 용량은 Nafion 115의 0.91보다 향상된 1.2 meq./g dry membrane을 얻었다. 또한 탄성계수의 경우 PE 막에 비하여 3~3.6 배 높은 강도를 나타내었으며, 함수율과 메탄올 투과 실험을 통해 PSSA-MA의 함량이 늘어남에 따라 높은 치수안정성과 낮은 메탄올 투과결과를 확인하였다.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.194-203
• /
• 2002

In resin infusion process(RIP), the fiber and the resin are in contact with each other for an impregnation step and often results in flow-induced defects such as poor fiber wetting and void formation. Resin flow characteristics in transverse direction and process modeling for woven fabric were studied, and the process modeling was applied to the manufacturing of hybrid composite materials. This study also considered the compressibility of woven fabrics in a series of compression force, and it was fitted well to an elastic model equation. Void formation was varied with the processing conditions in the stage of manufacturing composites using RIP. It was concluded from this study that proper combination of pressure build-up and dynamic heating condition makes important factor for flow-induced composite processing.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.760-767
• /
• 2000

Recently, the protection of construction is demanded with environmental pollution. These protect modes are use of concrete admixture, coat of protective polymer and impregnate of surface with chemicals etc. The most widely used impregnation is economical and effective. The define of Impregnation for construction protect is reacted in and consolidated substrate after absorbed. The impregnation agents are Polyesters, Acrylic monomers, Epoxy and Silicone derivatives. Commonly, because the Silane has good water repellency and environmental advantages that it widely used to water proofing agents, dampproofing agents and absorption reducer for concrete of bridges. When application of Silane, it occurs pollution and harmfulness as included organic solvent. The manufactures have tired to emulsification of Silane for the reducing of the defects. The Silane emulsion is vary unstable and does not stored long periods, and it is diminished in good properties with internal reaction. In this study we tried to emulsification of Silane for effectiveness improvement and reduce pollution and hazard and discussed properties variation of emulsion. The Silane emulsions are achieved emulsifying with W/O and O/W type surfactants. It used 0.24% PVA as protective colloid and stable phase is creamy. The creamy Silane emulsion performance as the penetration depth and water absorption rate are above 4 mm and below 0.1. It stable about 6 month at room temperature.

• 폴리머
• /
• 제34권1호
• /
• pp.14-19
• /
• 2010

여러 원인에 의한 석조문화재의 풍화 손상을 저지할 목적으로 아크릴계 고분자를 이용하는 가압함침 보존 처리방법에서 함침된 고분자와 무기물질인 석재와의 친화성을 높이도록 silane계 아크릴 단량체의 사용을 연구하였다. 기본 단량체인 methyl metacrylate(MMA)에 vinyl trimethoxy silane(VTMS)의 함량을 변화시키고 라디칼 중합으로 MMA-VTMS 공중합체를 얻어 이들 공중합체의 유리전이온도, 평균분자량, 그리고 저장탄성률의 변화를 평가하여 benzoyl peroxide (BPO) 1 wt%, 중합시간 8시간, 그리고 VTMS 5 mol% 혼합의 경우(PMV5)가 최적 혼합비율과 중합조건임을 알 수 있었다. 실제 국내산 화강암과 풍화된 암석의 시편을 함침 보존처리한 후 수분 흡수율, 충격특성, 내산성 및 접착특성 등을 측정한 결과 MMA 단독 사용과 비교하여 PMV5의 경우 모든 특성에 있어서 개선되는 것을 확인하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.202.1-202
• /
• 2003

• 한국재료학회지
• /
• 제8권4호
• /
• pp.299-303
• /
• 1998

탄소섬유강화 탄소복합재료를 구성하는 탄소매트릭스 프리커서로서 또는 함침제로서 사용되는 퍼퓨릴알콜의 열안전성과 탄소수율에 $2000^{\circ}C$에서 열처리한 흑연분말과 함침 후 경화시 승온속도가 미치는 영향을 열분석방법을 이용하여 조사하였다. 퍼퓨릴알콜에 30wt%의 흑연분말을 첨가하였을 때와 동시에 승온속도가 분당 $35^{\circ}C$일 때 퍼퓨릴알콜/흑연분말 혼합물은 가장 높은 열안정성을 보여주었으며, 흑연분말을 사용하지 않은 경우보다 $1000^{\circ}C$이상에서의 탄소수율이 10%이상 향상되었다. 이러한 결과는 탄소복합재료의 밀도화에 수반되는 탄화$\longrightarrow$함침$\longrightarrow$경화$\longrightarrow$재탄화 반복공정의 횟수를 줄이는데 다소 기여할 것으로 판단되었다.

• Advanced Composite Materials
• /
• 제18권1호
• /
• pp.61-75
• /
• 2009

The effect of porous matrix on thermal fatigue behavior of 3D-orthogonally woven SiC/SiC composite was evaluated in comparison with that having relatively dense matrix. The porous matrix yields open air passages through its thickness which can be utilized for transpiration cooling. On the other hand, the latter matrix is so dense that the air passages are sealed. A quantity of the matrix was varied by changing the number of repetition cycles of the polymer impregnation pyrolysis (PIP). Strength degradation of composites under thermal cycling conditions was evaluated by the $1200^{\circ}C$/RT thermal cycles with a combination of burner heating and air cooling for 200 cycles. It was found that the SiC/SiC composite with the porous matrix revealed little degradation in strength during the thermal cycles, while the other sample showed a 25% decrease in strength. Finally it was demonstrated that the porous structure in 3D-SiC/SiC composite improved the thermal fatigue durability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.61-64
• /
• 2001

This study relates to a method for manufacturing a solid electrolytic capacitor using a functional polymer composition. The method comprises immersing the rolled aluminum electrolytic capacitor device in polyaniline solution with high electric conductivity to impregnate the device with polyaniline, drying the impregnated device in a drying oven which is maintained at constant temperature to fully remove the solvent, inserting the dried device to a capacitor aluminum can and then sealing with epoxy resin, to manufacture a solid electrolytic capacitor using a conducting polymer. As such, the impregnation can be performed well at not only normal temperature and pressure, but also high temperature and reduced pressure. The solid electrolytic capacitor has the advantages of high capacity, low impedance and low ESR, and also, low manufacturing cost, simple processes and high reliability.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.97-104
• /
• 1990

Microvel double velour graft impregnated with a biodegradable algin was studied as a new vascular graft. It is blood tight but still retains high porosity. Thls graft does not need to be preslotted with blood before implantation and has good tissue ingrowth and biological healing properties. The algin impregnated vascular graft was investigated by "in vitro" tests in this study. It was characterl zed by ESCA analysis, SEM observation, and measurements of water permeability, algin coating weight, mechanical properties and whole blood clotting time. The water permeability of the graft was reduced more than 99% and the whole blood clotting time was fast more than three times by the algin impregnation treatment. "In vivo" performance examinations of the algin impregnated graft are on progress.aft are on progress.