• 한국잠사곤충학회지
• /
• 제37권2호
• /
• pp.154-160
• /
• 1995

Silk/CDP 혼합사의 염색거동을 살펴보기 위하여 pH, 염색온도, 조제 등 염색조건을 변화시켜가면서 고찰한 결과 다음과 같은 결론을 얻었다. 1. 견섬유는 염욕의 pH가 증가함에 따라 일계 pH까지 염착량이 증가하는 경향을 나타냈으나 CDP 섬유는 pH에 따른 염착량의 변화가 거의 나타나지 않았다. 염색온도의 염착거동에 대한 영향은 염색온도가 증가하면 초기염착속도는 증가하는 반면 최종 염착량은 줄어드는 일반적인 경향을 나타내었다. 특히 CDP섬유의 경우 유리전이온도 이하에서도 염착속도가 상당히 느린 결과를 보였다. 2. Carrier를 사용하여 silk/CDP 혼합사를 염색하는 경우 염욕의 pH 및 염색온도에 따라 각 component에의 염료 흡착 및 탈착거동, 염착량 변화 등이 차이가 나는 것으로 나타났다. 또한 carrier가 없는 경우에는 CDP component에는 거의 염착이 이루어지지 않았다. 3. Silk/CDP 혼합사의 염색시에 나타나는 이염현상은 carrier의 존재하에서 CDP component의 구조 이완에 따라 염착능력이 증대되고 염욕의 평형이 깨어지면서 silk component의 탈착과 동시에 친화력이 큰 CDP component,쪽으로 염료이동이 일어나는 것으로 나타났다.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.79-87
• /
• 1989

In the part 1 and 2, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer and fall & winter fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the core-spun yarn woven fabrics for Korean folk clothes were measured by KES-F system. The experimental results are statistically analyzed in the aspects of the mechanical properties, their effects on the hand values, formation of weared clothes and transformation behavior. The correlation in the hand values are analyzed, too. Furthermore, there mechanical properties are discussed in comparison with those values for kimono fabrics. The main results are summarized as follows: 1. The core-spun yarn woven fabrics for Korean folk clothes have box-shaped silhouette based on higher bending rigidity and shear elasticity. 2. The core-spun yarn woven fabrics for Korean folk clothes are inferior to silk fabrics, superior to polyester fabrics in formation. 3. A drapability and wrinkle recovery of core-spun yarn woven fabrics for Korean folk clothes formation for weared clothes are inferior to polyester fabrics, superior to silk fabrics. 4. A primary factor of mechanical properties contribute to the hand values of core-spun yarn woven fabrics for Korean folk clothes are same as the Korean women's winter fabrics, except for flexibility with soft feeling. 5. As for the hand values of core-spun yarn woven fabrics for Korean folk clothes, stiffness, anti-drape stiffness are superior to those of polyester fabrics. And also, flexibility with soft feeling, scrooping feeling of core-spun yarn woven fabrics have greater values as compared with silk fabrics for Korean folk clothes.

• 공업화학
• /
• 제8권1호
• /
• pp.49-58
• /
• 1997

고탄성, 고강도의 특성을 가지고 있는 열방성 액정고분자인 Vectra(LCP)와 무정형 poly(${\varepsilon}-caprolactam$) (PA)의 합금에서 LCP의 함량이 10parts 미만에서는 LCP의 네마틱 상의 유리전이온도가 $4{\sim}5^{\circ}C$ 정도 낮은 족으로 이동되나 그 이상의 함량에서는 유리전이온도의 이동을 볼 수 없는 것으로 보아 부분적인 상용성만 나타나게 됨을 확인하였다. PA/LCP 합금에서 LCP의 함량을 증가시켜 주기위해 N-g1ycinylmaleimide(GMI)를 합성한 다음 이를 methylmetacrylate(MMA)와 공중합시켜 poly(glycinylmaleimide-co-methylmetacrylate)[poly(GMI-co-MMA)]공중합체를 합성하고 이를 상용화제로 사용하였으며 이를 사용하는 경우 LCP 30parts 이상을 혼합하여도 혼화성이 있음을 알 수 있었고 이들 합금의 상용성은 합금의 각종 혼합비율에 따른 열적 특성과 rheological 특성을 측정하여 확인하고 고속충격특성과 굴곡강도 및 탄성율을 측정하였다.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.676-682
• /
• 2010

Superior hydrophilic properties will allow varieties of polyester(PET) fiber materials, fabrics and industrial materials a broader scope of use. The purpose of this study was to investigate the effect of water-absorbent softener treatment on the end-use properties and the hand of polyester knitted fabrics. Two different fabrics were knitted for the summer ladies' outwear; PET jersey and PET mesh. Variables were softner treatment and stitch type(jersey and mesh). Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(T.H.V.) was calculated according to the KN-304 Summer. Both water-absorbent softner treatment and stitch types affected mechanical properties and hand values of PET fabrics. Mesh were thicker than single jersey stitch. As they became thicker, tensile, shear, and compressional energy increased. It appeared that coefficient of friction of mesh stitch was larger than that of single jersey stitch. The coefficient of friction and the mean deviation of surface roughness were decreased by softener treatment. After softner treatment KOSHI and SHARI of the both PET jersey and PET mesh decreased. However, FUKURAMI values of PET jersey increased and that of PET mesh decreased. The T.H.V. of the treated PET jersey was lower than that of the untreated one, while the T.H.V. of the treated PET mesh was higher than that of the untreated one. Overall T.H.V. of the single jersey was better than that of the mesh before and after softner treatment.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.282-289
• /
• 2004

We have extensively characterized the fluorescence behavior of unsaturated polyester (UP) resin in the absence and presence of a 1,3-bis-(l-pyrenyl)propane (BPP) fluorescent probe at various dynamic and isothermal cure histories by means of a steady-state fluorescence technique using a front-face illumination equipment. In addition, we explored the effect of the fluorescence intensity on the relaxation of the fluorescent probe in the UP resin by resting the dynamically and isothermally cured resin at ambient temperature and pressure for 24 h. The monomer fluorescence intensity, which has two characteristic peaks at 376 and 396nm, changed noticeably depending on the cure temperature and time and provided important information with respect to the molecular and photophysical responses upon curing. The result of the fluorescence study indicates that the increased local viscosity and restricted molecular mobility of the UP resin surrounding the BPP probe after curing are both responsible for the enhancement of the monomer fluorescence intensity. Our results also demonstrate that once the BPP probe has enough time to rearrange and become isolated prior to fluorescence, a sufficient amount of fluorescence is emitted. Therefore, we note that the fluorescence behavior of this UP resin system is influenced strongly by the relaxation process of the fluorescent probe in the resin as well as process used to cure the resin.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.1-16
• /
• 2015

The appearances and geometry structures of knitted fabrics have important effects on their functions as textile fabrics. Structural design of the woven fabric, prior to the manufacturing processes in the weaving mill, often leads to a similar predictable appearance in the final outcome with the corresponding weave design. The increase of the employment of elastic textile yarns in knitting fabrics for comfort stretch or outdoor sports wear knit products has, however, resulted in difficulties in predicting the final appearance of the knit structure design. Due to the stretchability and exceptional recovery behavior of the elastic yarns such as polyurethane elastomeric yarns, the appearance of the final product often differs from the initial knit design. At textile CAD program for preparing tricot knit designs has been employed in this study to predict the two dimensional appearance of the design. The similarities between the designs and corresponding knit products seem to be acceptable for the two-dimensional textile CAD program in this study. However, when elastomeric yarns are partially employed in the polyester filament tricot product, a considerable amount of departure from the design is apparent due to the constriction and/or deformation of property differences in the elastomeric yarns and polyester filament yarns. Therefore, another purpose of this study is to measure the departure of the final tricot product from the initial tricot design, especially in the case employing elastomeric yarns in the knit structure together with regular polyester filament yarns. For measuring the three-dimensional departure, a 3D scanning system has been used for the mesh reconstruction of the fabric specimen. Hopefully, the result from this study will be used as a guide to modify and improve the current textile CAD program proposed for the two-dimensional simulation of the tricot.

• 폴리머
• /
• 제24권3호
• /
• pp.326-332
• /
• 2000

유리섬유/불포화 폴리에스터 복합재료에서 섬유에 처리된 사이징제가 복합재료의 최종 물성에 미치는 영향을 상온에서의 접촉각 측정을 통해 고찰하였다. 본 연구에서는 폴리비닐알코올, 폴리에스터, 그리고 에폭시계 사이징제를 사용하여 유리섬유의 표면을 처리하였으며 각각의 물성을 비교하였다. 유리섬유의 접촉각은 증류수와 diiodomethane을 젖음액으로 사용하여 Washburn식을 기본으로 한 wicking법으로 측정하였다. 결과적으로 접촉각 측정에 의해 구한 표면자유에너지는 에폭시계 사이징제로 치리된 유리섬유에서 최대값을 나타내었다. 복합재료의 층간 전단 강도 (ILSS)와 파괴 인성 ( $K_{IC}$ )의 측정 결과로부터 사이징제의 처리에 따라 계면 결합력이 증진되며 결과적으로 복합재료의 기계적 강도가 증가함을 알 수 있었다. 이것은 복합재료에서 유리섬유의 표면 자유에너지 증가에 기인한다고 사료된다.

• 청정기술
• /
• 제16권4호
• /
• pp.245-253
• /
• 2010

대구경 강관 표면 보호를 위해 사용되는 필라멘트 와인딩 공정에 불포화 폴리에스터 (unsaturated polyester: UP)를 이용한 자외선 (ultraviolet) 경화 방법을 적용하고자, UP를 이용한 최적의 UV 경화 조건을 찾아보았다. 기존의 유기계 과산화물을 개시제로 사용한 열경화 방법에서는 개시제의 불안정성, 휘발성 유기물 발생, 열에 약한 대상물질의 변형 등 문제점이 발생하므로 이에 대한 개선책으로 UV 경화방법을 시도하였다. UV 경화에 사용되는 다양한 개시제 중에서 비교적 침투력이 높아서 두꺼운 고분자 층 형성이 가능한 개시제 2 종(Irgacure 819 및 Darocure 1173)을 선정하여 이들의 조합비율에 따라 경화된 UP 고분자에 대한 열역학적, 기계적 물성을 비교 분석하여 우수한 경화조건 (개시제 함량 1.5 phr, 혼합 비율 1:1.2, UV 램프로는 갈륨램프)을 찾아내었다. 또한 UP 광경화수지의 경도, 충격강도, 굴곡강도 향상을 위해 유리섬유를 수지 내에 적층하여 복합재료를 제조하고 이들의 특성을 비교한 결과 충격강도가 매우 향상되었다.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.99-104
• /
• 2011

21세기 들어 자동차 도료산업은 엄격한 환경규제 및 생산 효율성 향상 및 더 낮은 생산비용으로 자동차용 도료를 생산하기 위하여 세정 및 전처리 과정을 삭제한 pre-primed 도장 시스템이 연구되고 있다. 이러한 pre-primed 도료 시스템의 경우, 차체 조립 전 단계에 강판이 유기 도막으로 도장되어있기 때문에 기존의 용접을 통한 조립이 힘들어 용접공정을 대체할 수 있는 새로운 비용접식 접합기술의 개발이 필요한 실정이다. 본 연구에서 비용접식 pre-primed 시스템에 적용하기 위하여 유연성과 성형성이 향상된 polyester계의 primer 1과 polyurethane계의 primer 2를 개발하였다. 개발된 도료의 물리적인 물성과 도장면의 부착력 평가 결과, primer 1이 primer 2에 비하여 연필경도, 내용제성, 유연성 및 접착제와의 부착력이 뛰어남을 알 수 있었으며, 용접공정을 대신한 비용접식 pre-primed 시스템의 가능성을 확인할 수 있었다.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.828-837
• /
• 2000

The purpose of this study was to evaluate the physical properties and the hand of bast/man made fiber mixed fabrics compared to linen. The mixed fabrics were made by rayon, polyester and modal fiber as warp yarn, and ramie, flax, rayon/flax and cotton/flax as weft yarn. The crease resistance, drape, tensile strength/extension, water absorbancy and warmth retention were measured for test fabrics. The mechanical properties were measured by Kawabata system, and the hand value was calculated by previously developed equation. The results obtained from this study were as follows: The crease resistance and drape properties of bast/man made fiber mixed fabrics were improved compared to those of linen. The tensile strength of polyester/bast fiber mixed fabrics increased compared to those of linen, but rayon/bast and modal/bast fiber mired fabrics decreased. The extension of all mixed fabrics was increased compared to that of linen. The rayon/ramie and modal/ramie mixed fabrics showed lower warmth retention than linen. The mixed fabrics used rayon and modal as warp yarn showed higher water absorbancy than linen. The Koshi and Hari hand value of all mixed fabrics showed lower than those of linen. Fukurami hand value showed little difference between mixed fabrics and linen. Shari, Kishimi, and Shinayakasa hand value of rayon/bast and modal/bast fiber mixed fabrics showed higher than those of linen.