• 공학논문집
• /
• 제7권1호
• /
• pp.79-87
• /
• 2005

Na-Montmorillonite와 10-Carboxy-n-decyltriethylammonium bromide (유기 양이온) 사이의 양이온 교환반응에 의해 얻어진 [TEACOOH]-Montmorillonite 층간화합물을 유기 단분자인 $\varepsilon$-caprolactone을 반응시켜 [TEACOOH]-$\varepsilon$-caprolactone-Montmorillonite 층간화합물을 형성하였다. 이렇게 얻어진 [TEACOOH]-$\varepsilon$-caprolactone-Montmorillonite 층간화합물을 $220^{\circ}C$의 온도 하에서 48시간 동안 가열하여 고분자화시켜 무기물질인 몬모릴로나이트와 유기 고분자인 폴리카프로락톤이 화학적으로 결합된 몬모릴로나이트/폴리카프로락톤 나노복합재료를 제조하였다. 고분자화반응을 수행한 후 얻어진 시료를 메탄올을 이용하여 추출한 뒤 고진공 하에 $65^{\circ}C$로 24 시간 동안 건조시킨 후에 얻은 층간거리 값으로는 34.24 $\AA$이 얻어졌다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.487-488
• /
• 2006

Novel bisphenol-based wholly aromatic poly(ether sulfone-ketone) copolymer containing pendant sulfonate groups were prepared by direct aromatic nucleophilic substitution polycondensation of 4,4-difluorobenzophenone, 2,2'-disodiumsulfonyl-4,4'-fluorophenylsulfone (40mole% of bisphenol A) and bisphenol A. Polymerization proceeded quantitatively to high molecular weight in N-methyl-2-pyrrolidinone at $180^{\circ}C$. Organic-inorganic composite membranes were obtained by mixing organic polymers with hydrophilic $SiO_2$ (ca. 20nm) obtained by sol-gel process. The polymer and a series of composite membranes were studied by FT-IR, $^1HNMR$, differential scanning calorimetry (DSC) and thermal stability. The proton conductivity as a function of temperature decreased as $SiO_2$ content increased, but methanol permeability decreased. The nano composite membranes were found to posse all requisite properties; Ion exchange capacity (1.2meq./g), glass transition temperatures $(164-183\;^{\circ}C)$, and low affinity towards methanol $(4.63-1.08{\times}10^{-7}\;cm^2/S)$.

• 폴리머
• /
• 제24권3호
• /
• pp.431-436
• /
• 2000

폴리락트산의 열적 안정성과 기계적 물성을 개선하고자 측쇄에 벤젠고리를 함유한 천연 $\alpha$-히드록시산인 만델린산(mandelic acid)과 L-락트산을 직접 용액 축중합법으로 공중합체를 합성하고 그 열적, 물리적 성질 등을 조사하였다. 합성된 공중합체는 무정형이었으며, 만델린산의 함량이 증가할수록 유리전이온도와 분해개시온도가 상승함을 열분석을 통해 알 수 있었다. 또한 만델린산을 5, 10 wt% 함유한 공중합체의 필름의 경우 그 기계적 성질이 다소 향상된 결과를 얻었다.

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.9-16
• /
• 2001

The diamide-diamine having carboxylic acid was prepared by direct condensation of 1,2,4-benzenetricarboxylic acid with bits[4- (3-aminophenoxy ) phenyl] sulfone and bits(4-aminouhenyl)-1,4- diisopropylbenzene in medium consisting of triphenylphosphite, LiCl, and N-methyl-2-pyrrolidone. Copoly (amide-imide) derivatives with high molecular weight could be synthesized by one-step polycondensation of prepared diamide-diamine having carboxylic acid and various dianhydride compounds. Depending on the chemical structure and composition of polymer backbones, the viscosities of polymers were found to range between 0.87∼ 1.57 dL/B. All the polymers showed good thermal stability up to 320$\^{C}$ and the 10% weight loss temperature was observed in the range of 450∼540$\^{C}$ in a thermogravimetric traces. The glass transition was recorded in the temperature range of 200 ∼ 270$\^{C}$. All the polymers showed an amorphous nature on a differential scanning calorimetric thermograms. These polymers generally had good mechanical properties and readily soluble in various polar solvents. Further, it was proved that their properties could be determined from the composition.

• Bulletin of the Korean Chemical Society
• /
• 제20권1호
• /
• pp.69-75
• /
• 1999

The silica-pillared H-kenyaites were prepared by interlarmellar base-catalyzed reaction of tetraethylorthosilicate [TEOS, Si(OC2H5)4] intercalated into the interlayer of H-kenyaite. The intercalation of TEOS was conducted by the octylamine preswelling process, resulting in a dramatic increase in gallery height to 24.7 Å. The interlamellar hydrolysis of octylamine-TEOS/H-kenyaite paste were conducted between 10 min and 40 min in 0.00%, 0.05% and 0.10% NH3-water solution respectively, and resulting in siloxane-pillared H-kenyajte with gallery height of 28.2-31.8 Å. The calcination of samples at 538 ℃ resulted in silica-pillared H-kenyaites with a large surface areas between 411 m2/g and 885 m2/g, depending on the aging time and NH3 concentration. Samples with optimum specific surface areas and well ordered-basal spacing were obtained by reaction between 10 min and 40 min in pure water and 0.05% NH3-water solution. Mesoporous samples with narrow pore size distribution were also prepared by reaction for 10-40 min in 0.05% NH3 solution. Rapid interlamellar reaction of TEOS in pure water showed that intercalated octylamine itself could act as a base catalyst during interlamellar polycondensation of TEOS.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.43-51
• /
• 2007

This paper describes the preparation and characterization of two kinds of fluorinated polybenzimidazole (PBI)s which can be potentially used for phosphoric acid-doped, high-temperature polymer electrolyte membrane fuel cells. Two kinds of perfluorocyclobutane (PFCB)-containing monomers were prepared via following synthetic steps; after fluoroalkylation of methyl 3-(hydroxy) benzoate and methyl 4-(hydroxy) benzoate with 1,2-dibromotetrafluoroethane and subsequent Zn-mediated dehalogenation, these compounds were cyclodimerized at $200^{\circ}C$ affording the ester-terminated monomers containing PFCB ether groups. The synthesized intermediates and monomers were characterized using FT-IR, $^1H-NMR,\;^{19}F-NMR$, and mass spectroscopy. The fluorinated PBIs were then successfully prepared through the solution polycondensation of the monomers and 3,3'-diaminobenzidine in polyphosphoric acid. Compared with traditional PBI, the glass transition temperatures of the fluorinated PBIs were obtained at $262^{\circ}C\;and\;269^{\circ}C$ which are lower than that of PBI and their initial degradation temperatures were still high over $400^{\circ}C$ under nitrogen. The fluorinated PBIs showed higher d-spacing values and improved solubility in several organic solvents as well as phosphoric acid, which confirmed they could be good candidates for the high temperature fuel cell membranes.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.575-580
• /
• 2014

단위체로서 4-[4-(4-hydroxyphenoxy)butoxy]benzoic acid (HBBA)와 p-hydroxy benzoic acid (HBA)를 사용하여 직접 중축합방법에 의해 액정 공중합체를 합성하였다. 합성된 중합체의 구조와 성질은 $^1H$-NMR, FT-IR, DSC, TGA, POM에 의하여 조사되었다. 연구결과에 의하면, 페놀/p-클로로페놀/1,1,2,2-테트라클로로에탄 (25/40/35=w/w/w) 내에서 측정된 중합체의 고유점성도 (${\eta}_{inh}$)는 0.77~1.60 dL/g로 측정되었으며, 중합체 P-80을 제외하고, 공중합체들의 전이온도와 액정상의 범위는 HBA의 양이 증가함에 따라 증가하였다. 중합체의 이러한 특성은 중합체 사슬의 불규칙성과 강직성이 증가하였기 때문으로 생각된다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3279-3284
• /
• 2012

Poly(benzimidazole-co-benzoxazole)s (PBI-co-PBO) are synthesized by polycondensation reaction with 3,3'-diaminobenzidine, terephthalic acid and 3,3'-dihydroxybenzidine or 4,6-diaminoresorcinol in polyphosphoric acid (PPA). All polymer membranes are prepared by the direct casting method (in-situ fabrication). The introduction of benzoxazole units (BO units) into a polymer backbone lowers the basic property and $H_3PO_4$ doping level of the copolymer membranes, resulting in the improvement of mechanical strength. The proton conductivity of $H_3PO_4$ doped PBI-co-PBO membranes decrease as a result of adding amounts of BO units. The maximum tensile strength reaches 4.1 MPa with a 10% molar ratio of BO units in the copolymer. As a result, the $H_3PO_4$ doped PBI-co-PBO membranes could be utilized as alternative proton exchange membranes in high temperature polymer electrolyte fuel cells.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.

• 대한화학회지
• /
• 제29권5호
• /
• pp.543-551
• /
• 1985

$p^-$, $m^-$, o-phthalaldehyde 및 5,5'-methylene-bis-salicyl aldehyde (PPTA, MPTA, OPTA, MBSA)와 5,5'-methylene-bis-salicylic dihydrazide, terephthalic dihydrazide 및 sebacic dihydrazide(MBSDH, TDH 및 SDH)등의 디히드라지드 화합물을 DMF-$CH_3COOH$ 혼합용액 중에서 축합반응으로 몇가지 새로운 폴리히드라존을 합성하였다. 합성한 폴리히드라존과 그의 금속킬레이트의 용해성, 흡수스펙트라 및 열적성질에 대하여 검토하였다. OPTA와 MBSDH의 반응으로 얻어진 폴리히드라존을 제외한 폴리히드라존과 그의 금속킬레이트는 일반적으로 보통 유기용매에 불응성이었다. 폴리히드라존의 중량열분석 결과 250-350$^{\circ}$C 사이에서 10%의 중량감소가 일어났고 500$^{\circ}$C고 500 폴리히드라존의 중량열분석 결과 250~350$^{\circ}$C 사이에서 10%의 중량감소가 일어났고 500$^{\circ}$C에서 32.5~63.5% 범위의 잔유중량을 나타내었다. 합성한 폴리히드라존 중에서 PPTA-MBSDH(IIa)및 MBSA-MBSDH(IIIa)가 열분해온도가 비교적 높았으며 IIa의 금속킬레이트에 있어서는 Zn(II)-IIa>Ni(II)-IIa>Co(II)-IIa>Cu(II)-IIa의 순서로 열분해온도가 저하되었다.