• 유기물자원화
• /
• 제13권3호
• /
• pp.97-104
• /
• 2005

본 연구에서는 폴리에스테르 비닐과 고밀도 폴리에틸렌(HDPE)의 분해에서 수분 함량, pH, 연소시 무게에 대하여 조사하였다. 폴리에스테르 비닐은 30일 동안의 음식물 쓰레기의 미생물에 의하여 분해가 이루어졌으나, 고밀도 폴리에틸렌(HDPE)은 분해가 전혀 이루어지지 않았다. 폴리에스테르계 생분해성 비닐은 음식물의 미생물에 의하여 10일후에 급속하게 분해가 일어났으며, 그 결과 무게가 감소함을 나타내었다. 연소반응의 $300^{\circ}C{\sim}600^{\circ}C$ 사이에서는 완전연소가 이루어졌으며, 음식물 속의 미생물에 의한 분해로 인하여 pH는 4.26에서 7.6으로 증가하였다. 그리고 poly ester vinyl은 60일 동안의 운전에서 90% 이상의 분해가 이루어졌다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.130-134
• /
• 1998

The physical properties of poly(vinyl alcohol) (PVA) are highly dependent on the degree of syndiotacticity, which is determined primarily by the choice of the vinyl ester monomer precursor. Efforts to produce more syndiotactic PVAs, as well to increase the molecular weight, have centered on the polymerization of vinyl trifluoroacetate,$^1$ vinyl trichloroacetate,$^2$ and vinyl pivalate (VPi).(omitted)

• Composites Research
• /
• 제12권6호
• /
• pp.15-21
• /
• 1999

비닐에스테르 수지와 탄소섬유의 계면접착력 향상을 위하여 탄소섬유에 물에 분산된 carboxy modified poly(hydroxy ether) (C-PHE)와 수용성 고분자인 poly(hydroxy ether ethanol amine) (PHEA) 및 비수용성인 poly(hydroxy ether) (PHE) 로 코팅하였다. 고분자로 코팅된 탄소섬유와 수지의 계면전단강도는 micro-droplet 시편을 제조하여 측정하였으며,각 시료마다 30개 이상의 시편을 사용하였다. 접착기구 규명을 위하여 코팅재로 사용된 고분자와 비닐에스테르 수지와 계면에서 확산현상을 고찰하였으며, 접착성 시험 후 탄소섬유의 표면을 SEM을 이용하여 분석하였다. PHE와 C-PHE코팅으로 탄소섬유의 계면전단강도가 크게 증가하였으며, 이는 이들 고분자의 비닐에스테르에 대한 우수한 용해도(solubility)때문으로 보여진다. 하지만 용해도가 낮은 PHEA코팅은 접착력 향상에 효과가 없었다.

• 폴리머
• /
• 제32권2호
• /
• pp.95-102
• /
• 2008

The $\alpha$,$omega$-diacrylate poly(dimethylsiloxane) (DA-PDMS) containing vinyl ester of versatic acid/vinyl acetate (Veova-10/VAc) was prepared by emulsion copolymerization of (DA-PDMS), Veova-10 (with VAc), and auxiliary agents at $85^{\circ}C$ in the presence of ammonium peroxodisulfate (APS) as an initiator. Sodium dodecyl sulfate (SDS) and nonylphenol ethylene oxide-40 units (NP-40) were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FT-IR). Thermal properties of the copolymers were studied by using thermogravimetric analysis(TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of variables such as temperature, agitation speed, surfactant kinds, molecular weights, initiator, and DA-PDMS concentrations on the properties of the silicone-containing Veova-10/VAc emulsions were examined. The calculation of monomer conversion versus time histories indicates that by increasing the DA-PDMS concentration the polymerization rate and the number of polymer particles decrease, respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.32-35
• /
• 1999

Poly(arylene ether phosphin oxide) (PEPO), Udel$^{\circledR}$ P-1700, Ultem$^{\circledR}$ 1000. poly(hydroxy ether) (PHE), carboxy modified poly(hydroxy ether)(C-PHE) and poly(hydroxy ether ethanol amine) (PHEA) were utilized for a coating of carbon fibers. Interfacial shear strength(IFSS) of polymers to carbon fibers was also evaluated in order to understand the adhesion mechanism. IFSS was measured via micro-droplet tests, and failure surfaces were analyzed by SEM. Diffusion between polymer and vinyl ester resin was investigated as a function of styrene content; 33. 40 or 50wt.% and the solubility parameters of polymers were calculated. The results were correlated to the interfacial shear strength. The highly enhanced interfacial shear strength (IFSS) was obtained with PEPO coating, and marginally improved IFSS with PHE, Udel$^{\circledR}$ and C-PHE coatings, but no improvement with PHEA and Ultem$^{\circledR}$ coatings.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.94-99
• /
• 2004

We have performed Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) studies on blends of poly(vinyl phenol) (PVPh) with poly(n-alkylene 2,6-naphthalates) containing alkylene units of different lengths. The results indicate that each poly(ethylene 2,6-naphthalate) (PEN) and poly(trimethylene 2,6-naphthalate) (PTN) blend with PVPh is immiscible or partially miscible, but blends of poly(butylene 2,6-naphthalate) (PBN) with PVPh are miscible over the whole range of compositions in the amorphous state. FTIR spectroscopic analysis confirmed that significant degree of intermolecular hydrogen bonding occurs between the PBN ester carbonyl groups and the PVPh hydroxyl groups. The large difference in the degree of mixing in these blend systems is described in terms of the effect that chain mobility has on the accessibility of the ester carbonyl functional groups toward the hydroxyl groups of PVPh, which in turn impacts the miscibility of these blends.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.187-190
• /
• 2001

The poly(vinyl alcohol) (PVA) fiber is recognized as the best candidate because of its good machanical properties together with excellent resistance to alkalis[1-5]. PVA cannot be prepared by the direct polymerization due to tautomerism of vinyl alcohol monomer. Thus PVA is obtained by the saponification of poly(vinyl ester) like poly(vinyl acetate) (PVAc). (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.48-51
• /
• 2003

Poly(vinyl alcohol) (PVA) obtained by the saponification of poly(vinyl ester) like poly(vinyl acetate) or poly(vinyl pivalate) is a linen. semicrystalline polymer, which have been widely used as fibers for clothes and industries, films, membranes, medicines for drug delivery system, and cancer cell-killing embolic materials[1-3]. PVA fibers and films have high tensile and compressive strengths, high tensile modulus, and good abrasion resistance due to its highest crystalline lattice modulus. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.104-107
• /
• 2003

Poly(vinyl alcohol) (PVA) obtained by the saponification of poly(vinyl ester) like poly(vinyl acetate) o. poly(vinyl pivalate) is a linear semicrystalline polymer, which has been widely used as fibers for clothes and industries, films, membranes, medicines for drug delivery system, and cancer cell-killing embolic materials[1-3]. PVA fibers and films have high tensile and compressive strengths, high tensile modulus, and good abrasion resistance due to its highest crystalline lattice modulus. (omitted)

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.214-220
• /
• 2023

Poly(vinyl alcohol) (PVA) is a common hydrophilic polymer that is synthesized through the saponification reaction of poly(vinyl ester)-based polymers, mostly using poly(vinyl acetate) (PVAc) as a precursor. The heterogeneous saponification reaction of poly(vinyl ester)-based films leads to PVA films with new surface properties. Cellulose acetate (CA), in which the hydroxyl group of cellulose is replaced by an acetyl group, is a typical cellulose derivative capable of overcoming the low processability of cellulose due to strong hydrogen bonding. In this study, P(VAc/VPi)/CA blended films were prepared by the solvent casting, and then PVA/Cellulose blended films with improved surface properties were prepared by heterogeneous saponification. The structural changes caused by heterogeneous saponification were confirmed by FT-IR analysis, where both saponification and deacetylation reactions occurred in the saponification solution. In addition, the surface property changes were analyzed by FE-SEM and contact angle analyses, and the transmittance changes of the modified films were also assessed.