• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.225-232
• /
• 1988

Poly (L- lactic acid-co-glycine-L-lactic acid) and Poly (L-lactic acid-co-glycine-L- methyl lactic acid ) have been prepared by ring opening polymerization. The monomer 6, 6-dimethyl morpho-line-2, 5-dione was synthesized by the bromoisobutylation of 2-bromoisobutyryl bromide with glycin e. L-lactide, 6-methyl morpholine-2, 5-diode. and 6, 6-dimethyl morpholine-2, 5-diode have been used as starting materials for polydepsipeptides. The synthesized monomers and copolymers have been identified by NMR and FT-lR spa- ctrophotometer. The thermal propert ies and glass transition temperature(Tg) of the copolymers have been measured by differential scanning calorimetry. The Tg values of poly(L-lactic acid co-glycine-L-lactic acid) system are increased from $53^{\circ}C\; to\; 107^{\circ}C$ with increasing the mole fraction of 6-methyl morpholine-2, 5-diode. And the Tg values of poly(L-lactic acid co-glycine-L-methyl lactic acid) system are increased from $53^{\circ}C\;to\;138^{\circ}C$ with increasing the mole fraction of 6. 6-dimethyl morpholine-2, 5-diode The thermal stability of poly (L-lactic acid-co-glycine-L-methyl lactic acid) is slightly greta text than that of poly(L-lactic acid-co-glycine-L-lactic acid) due to the methyl group.

• 대한의용생체공학회:의공학회지
• /
• 제13권2호
• /
• pp.147-154
• /
• 1992

Poly (glycolic aclu-co-glycine-L-lactic aclu) has been prepared by rlng opening polymerlzation. The monomer 6-methyl morpholine-2, 5-dlone was synthe-slzed by bromoproplonylation of 2 bromopropionyl bromide with glycine. Glycolide and 6-methyl morpholine-2, 5-dione have been used as starling materials for polydepsipeptides. The synthesized copolymers have been Identlrled by NMR and FT-lR spectrophotometer. The Tg value of poly(glycollc aclu-co glycine-L-tactic acld ) Is In creased with increasing mole fraction of 6-methylmorpholine-2, 5-dlone(60-$84^{\circ}C$). The glass trasltion temperature of poly(glycolic acid-co-glycine-L-lactic-acid) (62-$86^{\circ}C$) is lower than that of poly (L-lactic acrid-co-glycine-L-lactic acid ). The thermal degradation of poly( L-lactic acid-co- glycine-L-lactic acid ) Is decreased with increasing mole fraction of L-lactide. The thermal degrada pion of poly(glycolic acrid-co-91ycine-L-lactic aclu ) is increased with increasing mole Fraction of glycolide.

• 폴리머
• /
• 제24권4호
• /
• pp.477-487
• /
• 2000

Poly(L-lactic acid) (PLLA)/poly($\beta$-hydroxynonanoate) (PHN) 블렌드의 흔화도와 결정화거동을 연구하기 위해 여러 중량 흔합비의 시료를 제조하였다. DSC, XRD 및 편광현미경을 이용하여 PLLA/PHN 블렌드의 열적 성질 및 특성을 연구하였다. PLLA와 PHN은 무정형 영역에서 부분적인 상용성을 가졌으며 PLLA의 결정화도는 PHN이 첨가됨으로 인하여 증가되었다. 그리고 PHN이 첨가됨으로써 PLLA의 T$_{g}$, T$_{c}$, T$_{m}$ 의 이동이 있었다. 편광현미경 분석을 통하여 PLLA 구정의 수는 PHN이 증가할수록 증가하는 것을 알 수 있었다. 이로부터 PHN은 PLLA에 대하여 기핵제의 역할이 있음이 관찰되었다.

• Archives of Pharmacal Research
• /
• 제16권4호
• /
• pp.312-317
• /
• 1993

To confirm a new evaluation tedhnique for biodegradability of biopolymer microsphers in vivo condition, magnetic microsphere sytem was adopted for tracing the microspheres injected and lodged in micr. Microsphers of poly(DL-lactic acid), poly(L-alctic acid) and poly(DL-lactide-coglycolide)(PLGA) were prepared by solvent-extraction method and their organ distribution and biodegradation in mice was examined. Magnetic microspheres lodged in mice organs were recollected from the homogenates of mice organs with a constant flow magnetic separation apparatus. Recollected microspheres were observed by scanning electron microscopy and also were assayed for their magnetite ocntent by atomic absorption spectrophotometry to evaluate the biodegradability of polymeric microspheres. This method seems to be practical and simple to estimate the biodegradability of biopolymers over the conventional methods.

• 대한화학회지
• /
• 제34권2호
• /
• pp.203-210
• /
• 1990

의약 전달체에 사용되는 생체분해성 고분자로서 L-lactic acid 와 L-glutamic acid가 각기 다른 조성비로 이루어진 공중합체를 합성하였다. Poly (L-lactide)는 zink oxide를 이용하여 합성하였으며, Poly (L-lactide) 말단에 3-Amino-l-propanol을 도입시킨 다음 이미 합성된 γ-benzyl-L-glutamate-N-carboxyanhydride (γ-BLG-NCA)를 개환중합시켜서 block copoly (L-lactide-γ-benzyl-L-glutamate)를 합성하였다. NMR로써 L-lactide와 γ-BLG-NCA가 서로 일정한 비율로 이루어진 공중합체가 합성되었음을 확인하였으며, 생성된 공중합체들의 열적성질은 시차주사열량계법 및 열무게 측정법으로 조사하였다.

• 폴리머
• /
• 제25권3호
• /
• pp.385-390
• /
• 2001

oxyethylene/oxypropylene 공중합체의 존재하에 L-lactide를 중합시킴에 의해 poly(L-lactic acid) (PLLA) (A)와 polyether (B)로 이루어진 A-B-A block copoly(ester-ether)를 합성하였으며, 이들 블록 공중합체는 세그멘트를 도입함에 의해 PLLA에 유연성이 부여되었고, 표면에서의 미세상분리 구조로 인한 항혈전성의 개질을 확인하기 위하여 AFM사진을 관찰한 결과, PLLA와 비교하여 블록 공중합체는 필름표면의 요철성이 현저하게 저하하여 매끄러운 것을 확인하였으며 따라서, 표면의 요철이 항혈전성의 증가와 깊은 관계가 있음을 확인하였다.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.682-687
• /
• 2009

Nanofibrous membranes of poly(D,L-lactic acid)/chitin blend were prepared by electro spinning for a barrier of guided tissue regeneration. A miscible solution was obtained by the blending chitin-salt complex into 1-methyl-2-pyrrolidone solution of poly(D,L-lactic acid). The properties of the blend were examined for nanofibrous fabrication. The viscosity of the blend solution was increased significantly due to chain entanglement despite the low ratio of chitin to poly(D,L-lactic acid). An interaction between two polymeric compositions was confirmed by Fourier transform infrared spectroscopy. X-ray diffraction detected an appreciably ordered microstructure in the nanofiber of the blend. A membrane of thinner nanofibers was fabricated by electro spinning the chitin blend. The permeability of the membranes was examined using bioactive model compounds.

• Journal of Pharmaceutical Investigation
• /
• 제26권1호
• /
• pp.13-22
• /
• 1996

Poly(D,L-lactic acid) (PLA) microspheres containing alprazolam(APZ) were prepared by a solvent-emulsion evaporation method and their release patterns were investigated in vitro. Various batches of microspheres with different size and drug content were obtained by changing the ratio of APZ to PLA, PLA concentration in the dispersed phase and stirring rate. Rod-like APZ crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. The release rate of APZ for long-acting injectable delivery system in vitro, which would aid in predicting in vitro release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2006년도 임시총회 및 추계학술발표회
• /
• pp.38-40
• /
• 2006

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.37-46
• /
• 1988

Synthetic biodegradable polymers are of great interest for biomedical applications such as surgical sutures and drug delivery systems. The copolymers of ${alpha}-amino$ acids and ${alpha}-hydroxy$ matrices having the required permeability for drugs. Poly (glycine.co-lactic acid) and poly (glycine-co-glycolic acid) have been synthesized by ring-opening polymerization. Morpholine-2, 5-diane, lactide, and glycolid have been used as starting materials for polydepsipeptides. The synthesized monomers and copoylmers have been identified by NMR and FT-lR spectrophotometer. The thermal properties and glass transition temperatures ($T_g$) of the copolymers have been measured by differential scanning calorimetry. The $T_g$ values of poly (glycine-co-lactic acid) and poly (glycine co.glycolic acid) are increased with increasing mole fraction of morpholine-2, 5-dione in the copolymers.