• 약학회지
• /
• 제45권6호
• /
• pp.623-633
• /
• 2001

Various bupivacaine-loaded microspheres were prepared using poly(d,1-lactide) (PLA) and poly(d,1-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. The effects of process conditions such as drug loading, polymer type and solvent type on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency and yield of PLGA micro- spheres were higher than those of PLA microspheres. The prepared microspheres had an average particle size below 5${\mu}{\textrm}{m}$. The particle size range of microspheres was 1.65~2.24${\mu}{\textrm}{m}$. As a result of SEM, the particle size of PLA microspheres was smaller than that of PLGA microspheres. In morphology studies, microspheres showed a spherical shape and smooth surface in all process conditions. In thermal analysis, bupivacaine-loaded microspheres showed no peaks originating from bupivacaine. This suggested that bupivacaine base was molecular-dispersed in the polymer matrix of microspheres. The release pattern of the drug from microspheres was evaluated for 96 hours. The initial burst release of bupivacaine base decreased with increasing the molecular weight of PLGA, and the drug from microspheres released slowly. In conclusion, bupivacaine-loaded microspheres were successfully prepared from poly(d,1-lactide) and poly (d,1- lactic-co-glycolide) polymers with different molecular weights allowing control of the release rate.

• 폴리머
• /
• 제29권1호
• /
• pp.69-73
• /
• 2005

비바이러스성 유전자 전달체의 주요 단점인 낮은 transfection 효율에 기인한 반복투여 등을 극복하기 위하여 poly (D,L-lactide-co-glycolide)를 이용하여 DNA가 봉입된 미립구를 제조하였다. pDNA 그 자체 또는 여러 비율의 키토산/pDNA 복합체를 사용하여 봉입하였고, 그 결과 44%(pDNA 그 자체), 5%(0.7:1 미토산/pDNA 복합체), 그리고 8%(1:1 키토산/pDNA 복합체)의 봉입효율을 나타내었다. 주사전자현미경(SEM)을 통해 본 표면구조에서는 미립구 제조 직후에서는 매우 매끈한 구형을 보이다가 제조 후 41일 경에는 찌그러진 다공성의 구조를 보였는데 이는 미립구 제조에 사용한 poly(D,L-lactic-co-glycolic acid)(PLGA) 고분자의 분해에 의한 것으로 생각된다. 시험관내 방출실험에서는 0.7:1 키토산/pDNA 복합체를 사용한 미립구에서 47%의 pDNA가 26일만에 방출된데 반해, pDNA 그 자체 혹은 1:1 키토산/pDNA 복합체를 사용한 미립구에서는 각각 15% 혹은 32%의 pDNA 방출을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.36-43
• /
• 2020

생분해성 금속인 마그네슘 합금 와이어를 이용하여 담관용 스텐트를 제작하였다. 생체 내에서 마그네슘 합금의 문제점인 빠른 분해 및 부식을 제어하기 위하여 마그네슘 합금 와이어를 생분해성 고분자인 polycaprolactone (PCL), poly(propylene carbonate) (PPC), poly(L-lactic acid) (PLLA), poly(D,L-lactide-co-glycolide) (PLGA) 등으로 코팅하였다. 표면분해가 이루어지는 고분자인 PPC의 경우는 전분해 거동을 보이는 다른 고분자들(PCL, PLLA, PLGA)에 비해 크랙이나 박리가 없어 가장 효율적으로 마그네슘 와이어의 분해 속도를 지연시켰다. 또한 생분해성 고분자 코팅이 마그네슘 합금 스텐트의 기계적 물성인 축 방향 힘에 미치는 영향에 대하여 조사하였다. 대부분의 생분해성 고분자(PCL, PLLA, PLGA)로 코팅된 스텐트는 코팅되지 않은 스텐트에 비해 축 방향의 힘이 증가하여 스텐트의 유연성을 감소시켰으나, PPC로 코팅된 스텐트는 코팅되지 않은 스텐트와 비슷한 축 방향의 힘을 나타내 스텐트의 유연성을 감소시키지 않았다. 이상의 결과로부터 PPC가 가장 효율적인 생분해성 고분자로 판단된다.

• 약학회지
• /
• 제44권6호
• /
• pp.511-520
• /
• 2000

Various bupivacaine-loaded microspheres were prepared from poly (d,l-lactide) (PLA) or poly (d,l-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. PLA and PLGA microspheres were prepared by w/o/w and w/o/o multiple emulsion solvent evaporation, respectively. The effects of process conditions such as emulsification speed, emulsifier type, emulsifier concentration and internal/external phase ratio on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency was higher in the microspheres prepared by w/o/o multiple emulsion than that by w/o/w multiple emulsion method, because the solubility of bupivacaine HCI was decreased in oil phase compared with water phase. The prepared microspheres had an average diameter between 1 and $2\;{\mu}M$ in all conditions of two methods. In morphology studies the PLA microspheres showed an irregular shape and smooth surface, but PLGA microspheres had a spherical shape and smooth surface. The release pattern of the drug from microspheres was evaluated on the basis of the burst effect and the extent of the release after 24h. The in vitro release of bupivacaine HCl from microspheres showed a large initial burst release and $60{\sim}80%$ release within one day in all conditions of two methods. The extents of the burst release against PLA and PLGA microspheres were $30{\sim}50%$ and $50{\sim}80%$ within 20min, respectively. This burst release seems to be due to the smaller size of microspheres and the solubility of drug in water.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2342-2348
• /
• 2014

Poly(lactic-co-glycolic acid) (PLGA) were grafted to both ends of Pluronic$^{(R)}$ F68 ($(EO)_{75}(PO)_{30}(EO)_{75}$) triblock copolymer to produce poly{(lactic acid)$_m$-co-(glycolic acid)$_n$}-b-poly(ethylene oxide)$_{75}$-b-poly(propylene oxide)$_{30}$-b-poly(ethylene oxide)$_{75}$-b-poly{(lactic acid)$_m$-co-(glycolic acid)$_n$} (PLGA-F68-PLGA) pentablock copolymers. Molecular weights of PLGA blocks were controlled and five kinds of pentablock copolymers with different PLGA block lengths were synthesized using in-situ ring-opening polymerization of D,L-lactide and glycolide with tin(II) 2-ethylhexanoate ($Sn(Oct)_2$) catalyst. PLGA-F68-PLGA pentablock copolymers were characterized by $^1H$- and $^{13}C$-NMR, GPC, and TGA. The numbers (2m, 2n) of repeating units for lactic acid and glycolic acid inside PLGA segments were obtained as (48, 17), (90, 23), (125, 40), (180, 59), and (246, 64), with $^1H$-NMR measurement. From NMR data, the resultant molecular weights were determined in the range of 12,700-29,700, which were similar to those obtained from GPC. Polydispersity index was increased in the range of 1.32-1.91 as the content of PLGA blocks increased. TG and DTG thermograms showed discrete degradation traces for PLGA and F68 blocks, which indicate the weight fractions of PLGA blocks in pentablock copolymers can be calculated by TG profile and it is possible to remove PLGA block selectively. Hydrodynamic radius and radius of gyration of pentablock copolymer micelle were obtained in the range of 46-68 nm and 31-49 nm, respectively, in very dilute (i.e. 0.005 wt %) aqueous solution of THF:$H_2O$ = 10:90 by volume at $25^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권9호
• /
• pp.3753-3758
• /
• 2015

Background: Polymeric nanoparticles are attractive materials that have been widely used in medicine for drug delivery, with therapeutic applications. In our study, polymeric nanoparticles and the anticancer drug, chrysin, were encapsulated into poly (D, L-lactic-co-glycolic acid) poly (ethylene glycol) (PLGA-PEG) nanoparticles for local treatment. Materials and Methods: PLGA: PEG triblock copolymers were synthesized by ring-opening polymerization of D, L-lactide and glycolide as an initiator. The bulk properties of these copolymers were characterized using 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. In addition, the resulting particles were characterized by scanning electron microscopy. Results: The chrysin encapsulation efficiency achieved for polymeric nanoparticles was 70% control of release kinetics. The cytotoxicity of different concentration of pure chrysin and chrysin loaded in PLGA-PEG ($5-640{\mu}M$) on T47-D breast cancer cell line was analyzed by MTT-assay. Conclusions: There is potential for use of these nanoparticles for biomedical applications. Future work should include in vivo investigation of the targeting capability and effectiveness of these nanoparticles in the treatment of breast cancer.