• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1053-1058
• /
• 1998

Poly(vinyl butyral)s (PVB) with different butyral content were synthesized from poly(vinyl alcohol)(PVA) and n-butylaldehyde with acid catalyst. Bound butyral unit in PVB was determined by elemental analysis. Synthesized PVBs were reacted with p-azidobenzaldehyde to give photosensitive polymer with azidobenzene group(PVB-AZ). Bound photosensitive azidobenzene group in PVB-AZ was determined by UV spectrophotometry. The photosensitivity of PVB-AZ was compared with that of PVB/2,6-bis(p-azidobenzylidene)cyclohexanone(BAC) photosensitizer mixture system by gray scale method. Photosensitivity of PVB-AZ was higher than that of PVB/BAC mixture system. The photosensitivity of PVB-AZ was dependent on the developer used due to the solubility of PVB-AZ in a developer solvent.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.113-118
• /
• 2015

Poly(vinyl butyral), PVB was photooxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PVB film were investigated by the measurement of reflectance, surface roughness, contact angles, elemental composition, and zeta potential. With increasing UV energy, reflectance decreased in the visible and ultraviolet regions particularly at the wavelength of 400nm. The irradiation produced nano-scale surface roughness including the maximum peak-to-valley roughness increased from 274nm for the unirradiated PVB to 370nm at the UV energy of $5.3J/cm^2$. The improved hydrophilicity was due to the higher $O_{1s}/C_{1s}$ resulting from the introduction of polar groups such as C=O bonds. The surface energy of the PVB film increased from $35.3mJ/m^2$ to $39.3mJ/m^2$ at the irradiation of $15.9J/cm^2$. While the zeta potentials decreased proportionally with increasing UV energy, the cationic dyeability of the PVB increased accordingly resulting from the improved affinity of the irradiated PVB surfaces containing the photochemically introduced anionic and dipolar dyeing sites.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.662-666
• /
• 2007

Poly(vinyl butyral) (PVB) with different wt% water was studied gravimetrically as well as with 1H magic angle spinning (MAS) nuclear magnetic resonance (NMR). The composition of PVB samples changes during MAS NMR because of the centrifugal force. As MAS time progresses, initially free water was removed fast but bound water also was gradually depleted. More water was diminished at faster spinning speeds, longer spinning time, higher temperatures, and higher initial water contents. As water in PVB was reduced, the chemical shifts and line widths of different types of water and also those of PVB changed. Our results demonstrate that 1H MAS NMR carried out at 10 kHz in less than about 5 minutes is a convenient and sensitive technique to measure: (a) the content variations of different types of water in polymers, (b) the degree of the interaction of water and polymer, and (c) the molecular dynamics of the polymer. Our study can be extended to different soft polymers with other small molecules than water in them.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.168-173
• /
• 2002

Poly (vinyl butyral) (PVB) was synthesized by acetalization of poly (vinyl alcohol) (PVA) PVB was prepared in particulate forms in water, and chemical and physical properties of the products were characterized using various techniques. The prepared PVB had size distribution from 100 to 700 $\mu\textrm{m}$ with mean diameter of about 380 $\mu\textrm{m}$. The chemical structure of PVB was characterized using FT/IR and NMR, and the average degree of acetalization was determined to be 77% from the titration measurement. DSC data showed that the crystalline structure of PVA vanished as acetalization reaction proceeded to produce PVB, and the glass transition temperature emerged at about $70^{\circ}C$. TGA data showed that PVB was much more thermally stable than PVA, and showed no degradation up to $300^{\circ}C$. Solubility test showed that PVB was soluble in alcohols but Insoluble in water, being totally different from PVA.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.409-416
• /
• 1994

A double layered photoreceptor using phthalocyanine dye was made by dip-coating method. The under cutting layer(UCL) was coated with A1$\_$2/O$\_$3/ or polyamide, and the charge generation layer(CGL) was formed by .tau.-type metal-free phthalocyanine. The oxadiazole was used as a charge transport layer(CTL) and polycarbonate and poly(vinyl butyral) was employed as a host polymer. The .tau.-H$\_$2/Pc had an absorption peak around 780nm, which coincided with the emitting wavelengths of GaAlAs diode lasers. Maximum charge acceptance of CTL that gives thickness of 12.mu.m was -900V by corona charge of -6.0kV. In photo-induced discharge measurements, residual potential was less than -20V and sufficient for ordinary use, and sample films using of poly(vinyl butyral) was showed good charge retention. In printing test, drum that was employed polycarbonate as a host polymer showed the good print quality.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.124.2-124.2
• /
• 2008

• Proceedings of the Korean Society of Rheology Conference
• /
• 2002.11a
• /
• pp.167-170
• /
• 2002

No Abstract, See Full Text

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2002

Physical properties of PVB [Poly(vinyl butyral)] polymer are strongly correlated with water contents in the polymer. Thus dynamics of PVB containing 10~50(w/w) ％ of water were studied by $^{13}$ C CP/MAS/DD over the temperature range 293K -348K. From the Peak area, line width, chemical shift, and relaxation times ( $T_{1}$ $T_{1p}$) measured at 9.4 T, it was deduced that water facilitates molecular dynamics of the PVB molecules overall including conformational exchange of the racemic and meso butyaldehyde rings in the PVB. However, the influence of water was not linear to the amount of water in the PVB samples. It is suggested that water up to 30 w/w ％ of the sample is closely bound to the PVB polymer and water relatively free from the PVB polymer starts to appear when water is added more than 30 w/w ％.％.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.1
• /
• pp.46-54
• /
• 1995

An electrochromic(EC) cell was constructed using $WO_3$ as a electrochromic material and NiO as a counter electrode, deposited onto ITO-coated glass by the implementation of electron beam evaporation. The electrolytic media were both lithium and proton conducting polymers such as poly-acrylonitrile(PAN)-$LiClO_4$, poly-ethylene oxide(PEO)-$LiClO_4$, poly-vinyl butyral(PVB)-LiCl and PVB-H$_3$$PO_4$. Potentiodynamic cycling of the cells using PAN-$LiClO_4$, or PVB-$H_3$$PO_4$ electrolyte yielded a transmission variation of more than 40% at the wavelength of 632.8 nm within less than 10 sec response time at room temperature. These results indicate that these electrolytes, transparent in gel type, are premising for the application in large area electrochromic windows.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.15-22
• /
• 1996

FET type $Ca^{2+}$ sensor(Ca-ISFET) was fabricated by micropool and photolithographic method utilizing photosensitive polymer as membrane materials. When OMR-83 negative photoresist was used as membrane material, it gave good sensitivity by micropool method with dioctyladipate as plasticizer but it could not be used in the photolithographic method. When poly(viny1 butyral), PVB was used as membrane material, it gave relatively high sensitivity ($23{\pm}0.2\;mV/decade$) for $Ca^{2+}$ concentration range of $10^{-4}{\sim}10^{-1}\;mole/{\ell}$ by photolithographic method. PVB also provided good adhesion to the pH-ISFET base device without adhesion promoter pretreatment and any plasticizer.