• Macromolecular Research
• /
• 제15권2호
• /
• pp.142-146
• /
• 2007

Poly[(1-(9-carbazoly1)ethylene)-co-(3-cinnamoyloxyoctyl-9-carbazolyl)] ethylene (PVK-Cin) was prepared by tethering cinnamate pendants to a carbazole group via an octylene spacer. The photopatternability of the new PVK based-polymer was investigated using a photocrosslinking reaction under UV light illumination $(\lambda=254nm)$. Blends of the PVK-Cin and a soluble poly(phenylene vinylene) (CzEh-PPV) were employed to study the photocrosslinking behavior. Well resolved lithographic patterns were observed in these polymer systems. PVK-Cin produced a blue light emitting pattern both before and after the photocrosslinking reaction. The blends of PVK-Cin and CzEh-PPV also showed corresponding emissions at 398 and 525 (560) nm in the film state.

• 폴리머
• /
• 제35권4호
• /
• pp.314-319
• /
• 2011

(2-N-carbazoylmethyl) styrene을 티타노센 촉매와 라디칼 개시제를 사용하여 신디오탁틱 및 아탁틱 poly(2-N-carbazoylmethyl) styrene을 합성하고 발광특성 중 엑시머 형성에 대하여 조시하였다. 어탁틱 고분자는 하나의 발광만을 나타낸 반면에 신디오닥틱 고분자는 카바졸기가 부분적으로 오버랩되는 정렬에서 기인하는 단량체 발광과 엑시머 발광을 모두 나타내었다. 아탁틱 고분자의 발광은 용액농도와 온도 의존성이 나타나지 않았으나, 신디오탁틱 고분자는 의존성의 크게 관찰되었다. 이러한 결과로 엑시머 발광은 치환기인 카바졸의 위치에 의존하는 것을 확인하였다.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.403-408
• /
• 2005

A new terphenylenevinylene carbazylenevinylene alternating copolymer with the advantage of poly(p-phenylenevinylene) (PPV), poly(p-phenylene )(PPP) and poly(carbazole) was designed, synthesized and characterized. The polymer structure was confirmed by various spectroscopic analyses and the number average molecular weight ($M_n$) of the obtained polymer was 7,800. The resulting polymer was thermally stable with high glass transition temperature ($T_g$) ($150^{\circ}C$), and was readily soluble in common organic solvents. Cyclic voltammetry study revealed that the HOMO and LUMO energy levels of the polymer were 5.37 and 2.47 eV, respectively. The ITO/PEDOT/polymer/AI device fabricated from the polymer emitted bright sky blue light with a maximum peak of around 478 nm. The device showed the maximum brightness of 1,200 nW with a turn-on voltage of 7V.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.451-455
• /
• 1999

The polymerization of 2-ethynylpyridine by alkyl bromide carrying carbazole moiety, 6-(N-carbazolyl)hexyl bromide, relatively proceed well to give the corresponding poly[6'-(N-carbazolyl)hexyl-2-ethynylpyridinium bromide) in high yields under DMF reflux conditions without any initiator or catalyst. This polymerization was influenced upon the initial monomer concentration. The polymer yields and inherent viscosities of the resulting polymers were in the range of 34-85% and 0.11-0.21 dL/g, respectively. Instrumental analyses using NMR, IR, and UV-visible spectroscopies and elemental analysis indicated that the resulting polymer has a conjugated polymer backbone system carrying pyridine and n-hexyl carbazole moiety. The polymers were mostly brown powders and completely soluble in DMF, DMSO, nitrobenzene, and formic acid. The photoluminescence spectrum of the dilute polymer solution with the excitation at 383 nm exhibited two sharp peaks at 495 and 540 nm.

• 공업화학
• /
• 제24권4호
• /
• pp.396-401
• /
• 2013

Benzo[1,2,5]thiadiazole, carbazole 및 phenanthrene을 기본 골격으로 한 교대공중합체인 poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT)와 poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT)을 Suzuki coupling reaction을 이용하여 중합하였다. 합성한 고분자들은 chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran, toluene과 같은 유기용매에 대한 용해도가 우수하였다. PCD20TBT의 최대흡수 파장과 밴드갭은 각각 535 nm와 1.75 eV이고, PN40TBT의 최대흡수 파장과 밴드갭은 각각 560 nm과 1.97 eV이었다. PCD20TBT의 HOMO 및 LUMO 에너지준위는 각각 - 5.11 eV와 - 3.36 eV이고, PN40TBT의 HOMO 및 LUMO 에너지준위는 각각 -5.31 eV와 -3.34 eV이었다. 합성한 고분자와 (6)-1-(3-(methoxycarbonyl)-{5}-1-phenyl[5,6]-fullerene(PCBM)을 1:2의 중량비로 블랜딩하여 제작한 이종접합형태(bulk heterojunction) 태양전지를 제작하였다. PCD20TBT의 광전변환효율은 0.52%, PN40TBT의 광전변환효율은 0.60%이었다. 그리고 소자의 단락 전류밀도, 충진 인자와 개방전압은 PCD20TBT가 각각 $-1.97mA/cm^2$, 38.2%, 0.69 V이며, PN40TBT의 경우 각각 $-1.77mA/cm^2$, 42.9%, 0.79 V이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.204-204
• /
• 2008

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.277-277
• /
• 2012

PCDTBT (Poly[N-9''-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)]) is an attractive material as a semiconducting polymer for organic thin film transistor (OTFT) and organic solar cell (OSC). High power conversion efficiency (~6%) under simulated AM 1.5G solar illumination of bulk-heterojunction solar cell with PCDTBT and [6,6]-phenyl C60 butyric acid methyl ester (PC61BM) blend was reported. In OSC, it is known that the band alignment at the interface between donor and acceptor is critical. Therefore, we studied the interfacial electronic structures of PCDTBT and PC61BM. The polymers are deposited by electro-spray on gold and In-situ x-ray and ultraviolet photoelectron spectroscopy measurements revealed the interfacial electronic structures. We obtained the energy level alignment between two materials and the different interface formation was observed with different deposition order.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.43-46
• /
• 2012

Organic solar cell devices were fabricated using poly[9-(1-octylnonyl)-9H-carbazole-2.7-diyl]-2.5-thiophenediyl-2.1.3-benzothiadiazole-4.7-diyl-2.5-thiophenediyl] PCDTBT/ [6,6]-phenyl $C_{71}$ butyric acid methyl ester (PC71BM) active layer deposited by spin coating. Moreover, the relationship between solar cell performance and buffer layer thickness was investigated by spin coating speed and AFM imaging of the buffer layer surface. The performance of the organic solar cell with spin-coated active layer was then evaluated, and the power conversion efficiency of the solar cell was determined to be > 5%.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.399-405
• /
• 2013

Two series of new green phosphorescent polymers bearing a bis(2-phenyl-pyridine)iridium(III)(dibenzoylmethane) [$(ppy)_2Irdbm$] complex were designed and synthesized. Poly-carbazole (PCbz) derivative or polyfluorene with pendant carbazole groups (PFCbz) were employed as host polymers for the iridium complex. The iridium complex monomer was copolymerized with the host monomers using varying monomer ratios via a Yamamoto coupling reaction. Efficient energy transfer from host to dopant unit was observed by increasing the ratio of the iridium guest in the copolymers. Electroluminescent devices with the configuration ITO/PEDOT:PSS/polymer/BmPyPB/LiF/Al were fabricated and characterized. The phosphorescent polymers composed of the iridium complex guest and polyfluorene with carbazole pendants as a host performed better than the polymers composed of the same guest and the main chain polycarbazole host. A maximum external quantum efficiency of 0.73%, a luminous efficiency of 1.21 cd/A, and a maximum luminance of 372 $cd/m^2$ were obtained from a device fabricated using one of the synthesized copolymers.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.162-167
• /
• 2015

To investigate the effect of fluoro groups substitution on poly(p-phenylenevinylene) derivatives, poly(2,3,5,6- tetrafluoro-p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCTF-PPV, and poly[2,3,5,6-tetrafluoro-p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], PMTF-PPV, were synthesized by the well-known Wittig condensation polymerization process. To compare the influences of fluoro groups, no fluoro groups containing model polymers, poly(p-phenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene), PCPPPV and poly[p-phenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-p-phenylenevinylene], p-PMEH-PPV, were also synthesized. The resulting polymers were completely soluble in common organic solvents and exhibited good thermal stability up to 300℃. The polymers showed UV-visible absorbance and photoluminescence (PL) in the ranges of 259~452 nm and 500~580 nm, respectively. The tetrafluorophenyl containing PCTF-PPV and PMTF-PPV showed relatively red-shifted PL peaks at 521 nm and 580 nm, respectively, compared to that of non-fluoro groups containing polymers (PCP-PPV: 500 nm and p-PMEH-PPV: 539 nm). The single-layer light-emitting diode was fabricated in a configuration of ITO/polymer/Al. Electroluminescene (EL) emissions of PCP-PPV, PCTF-PPV, p-PMEH-PPV and PMTF-PPV were shown at 507, 524, 556, and 616 nm, respectively.