• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.175-183
• /
• 2015

A series of fluorinated aromatic poly(hydroxyamide)s (PHAs) were synthesized by direct polycondensation of diacides containing 2,6-dimethylphenoxy group and quinoxaline ring in the main chain with 2,2-bis-(3-amino-4-hydroxyphenyl) hexafluoropropane. The PHAs had relatively low inherent viscosities in the range of 0.35~0.43 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs exhibited excellent solubility in aprotic solvents such as NMP, DMAc, DMF and DMSO as well as in common organic solvents such as pyridine, THF, and m-cresol at room temperature. However, the poly(benzoxazole)s (PBOs) were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid. The PBOs showed glass transition temperatures between 233 and $284^{\circ}C$ by DSC and maximum weight loss temperatures in the range of $536-546^{\circ}C$ by TGA.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.143-153
• /
• 2017

Herein we studied the characterization of the PBO films formed via solution casting and thermal cyclization of poly(o-hyroxyamide)s(PHAs) that were synthesized by direct polycondensation of 3,3'-dihydroxybenzidine with 4,4'-(2,3-quinoxalinedioxy) dibenzoic acid and/or 4,4'-(2,3-pyridinedioxy) dibenzoic acid. All the PHAs exhibited inherent viscosities in the range of 0.55~0.84 dL/g in DMAc solution. The copolymers, CPH-2-5, were partially soluble in less polar solvents like pyridine and THF. However, all the PBOs were not soluble in polar solvents, but only partially soluble in sulfuric acid. The temperatures corresponding to 10% weight loss of the PBOs with increasing content of quinoxalinedioxy unit were higher than those of the PHAs, and the char yields at $900^{\circ}C$ in $N_2$, tensile strength, and initial modulus of the PBOs were 1.1~1.3 times, 1.2~1.8, and 1.6~3.3 times higher, respectively, than those of the PHAs. The LOI value of CPB-2 was 38.5%, while that of CPB-1 was the highest at 40.0%. The LOI test confirmed that excellent flame retardants were synthesized.

• Environmental Analysis Health and Toxicology
• /
• v.13 no.3_4
• /
• pp.55-61
• /
• 1998

Glutathione-S-transferases (GSTs) detoxify electrophilic xenobiotics and reactive metabolites. Recently benzene-fused heterocycles have been shown to increase the total amount of hepatic GSTs in rats. Primarily this study aimed to determine the induction of GSTs by benzoazoles (BAs) including benzoxazole (BX), 2-methylbenzoxazole (M-BX), 2,5-dimethyl benzoxazole (D-BX), benzothiazole (BT), aminobenzothiazole (A-BT) and 2-mercaptobenzothiazole (M-BT) in rats. Hepatic cytosol and poly(A)$^+$ mRNA were prepared from rats after oral administration of BX, BT, M-BX, D-BX, A-BT and M-BT for 5 consecutive days at doses of 1 mmol/kg. Western immunoblot and northern blot analysis were conducted with rabbit anti-GST Ya, Yb$_1$, Yb$_2$, Yc antibodies and cDNA probes containing = 500 bps in the specific coding regions of Ya, Yb$_1$, Yb$_2$, Yc$_1$, and Yc$_2$, respectively. All BAs increased the amount of enzymes and mRNA levels of GSTs. BT was the most effective inducer of GSTs among the compounds examined in this study. Although A-BT and M-BT, the derivatives of BT, induced GSTs, these chemicals had lesser effect on induction of GSTs than BT. The derivatives of BX also induced less GSTs than the parent compound and the addition of methyl group to the benzene ring of BX reduced the induction of GSTs. BAs had better inductive effects on the class $\alpha$(Ya, Yc) than class $\mu$ GSTs (Yb$_1$, Yb$_2$). BAs enhanced mRNA levels of GSTs in parallel with the protein levels. These results indicate that 1) most of BAs induced various isozymes of GSTs, 2) the induction of GSTs appears to be correlated with the chemical structure of the derivatives, and 3) the expression of GST by BAs is presumably under the transcriptional regulation.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.478-485
• /
• 2006

Physical properties and flammability of polyhydroxyamides (PHAs) haying poly (ethylene-glycol) methyl ether (MPEG) and/or dimethylphenoxy pendants were studied by using DSC, TGA, FTIR, pyrolysis combustion flow calorimeter (PCFC), and X-ray diffractometer. The degradation temperatures of the polymers were recorded in the ranges of $276{\sim}396^{\circ}C$ in air. PCFC results showed that the heat release (HR) capacity and total heat release (total HR) values of the PHAs were increased with in-creasing molecular weight of MPEG. In case of M-PHA 2 annealed at $290^{\circ}C$, the values of HR capacity were siginificantly decreased from 253 to 42 J/gK, and 60% weight loss temperatures increased from 408 to $856^{\circ}C$ with an annealing temperature. The activation energy for the decomposition reaction of the PHAs showed in the range of $129.3{\sim}235.1kJ/mol$, which increased with increasing conversion. Tensile modulus of PHAs were decreased as increasing chain of MPEG, and showed an increase more than initial modulus after converted to PBOs.

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.195-205
• /
• 2016

A series of aromatic poly(hydroxyamide)s (PHAs) containing varying oligo(oxyethylene) substituents and 1,3-phenylene imide ring unit in the main chain were synthesized by the direct polycondensation reaction. The inherent viscosities of the PHAs exhibited in the range of 0.89~1.12 dL/g in DMAc or DMAc/LiCl solution. The PH-2~5 copolymers were easily soluble in strong aprotic solvents: DMAc, NMP, DMSO etc. and the PH-5 copolymer was soluble in less polar solvents such as m-creasol and pyridine with LiCl salt on heating. However, all PBOs were quite insoluble in other solvents, but only partially soluble in sulfuric acid. All copolymers (PH-2~5) could afford the flexible and tough films by solution casting. We identified that the PHAs were converted to the PBOs by the thermal cyclization reaction in the range of $200{\sim}380^{\circ}C$. The 10% weight loss temperatures and char yields of the PBOs were recorded in the range of $382{\sim}647^{\circ}C$ and 38.7~73.1% values at $900^{\circ}C$. The tensile strength and initial modulus of the PH-5 in the copolmers showed the highest values of 2.46 GPa and 49.55 MPa, respectively. The LOI values of the PHAs were in the range 26.6~29.0%, and increased with increasing 1,3-phenylene imide ring unit.