• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.17-21
• /
• 2006

The oxygen barrier films were formed on poly(ethylene terephthalate) (PET) substrate by a sol-gel process using aminoalkoxysilanes. The coating layers were characterized by FT-IR and SEM. The oxygen permeability coefficients of coating films were measured by variable volume method, and then the influences of solvent ratio in sol and film drying temperature on the oxygen barrier properties were investigated. The aminoalkoxysilane coating films exhibited much higher oxygen barrier properties than PET film. The oxygen permeability coefficient of the film coated with each of APTEOS and APTMOS was measured to be $2.96{\times}10^{-6}$ and $3.05{\times}10^{-5}\;GPU$, respectively, while that of PET film was $1.16{\times}10^{-4}\;GPU$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.813-820
• /
• 2015

We have studied commercialization and process optimization of protective film on transparent conductive coated substrate, nano silver on flexible PET (poly ethylene terephthalate), by means of roll-to-roll micro-gravure coater. Nanosilver on flexible PET substrate is potential materials to replace ITO (indium tin oxide). Protective film is most important to maintain unique silver pattern on top of transparent PET. PSA pressure sensitive adhesives) was developed solely for nano silver on PET and protective film was successfully laminated. We have optimized all process conditions such as coating thickness, line speed and aging time & temperature via experimental design. Transparent conductive film and its protective film developed in this research are commercially available at this moment.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.277-283
• /
• 2002

Poly(ethylene terephthalate)(PET) filaments of regular(monodenier 2.08d) and ultramicrofiber (monodenier 0.05d) were treated with dimethylformamide(DMF) to observe the structure change of the PET such as shrinkage, density, X-ray diffraction of the UMF treated with DMF were measured. Also, dyeing experiments were performed to see the effects of DMF. The dyeability was improved by DMF treatments, and the equilibrium dye uptake increased in spite of the increase in the density and birefringence and crystallinity. The heat shrinkage appeared in PET UMF treated PET UMF treated with DMF at $80^\circ{C}$ by TMA, DSC, and Reovibron analysis and $T_m$ peak was shown by DSC analysis.

• Textile Coloration and Finishing
• /
• v.2 no.2
• /
• pp.1-6
• /
• 1990

In order to investigate the fine structural changes of poly (ethylene terephthalate) film by hydrazinolysis, PET was treated with hydrazine hydrate in methanol at $30^{\circ}C$ for various times. Initially apparent crystallite size and degree of orientation are increased and then, gradually decreased with hydrazinolysis. According to thermoluminescence measurement, trap site decreased by dissolution and then gradually increased with growth of defect in structure. Maximum peak temperature of tan and dynamic loss modulus E" upon hydrazinolysis shifted to the lower temperature in the progress of hydrazinolysis.ysis.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.1-7
• /
• 1990

The crystallinity and dyeability of PET filament were studied when the conditions of drawing and heat-setting were varied. The crystaltinity of PET filament was increased as the drawing ratio and heatsetting temperature were increased. The dye uptake and dyeing rate of PET filament were decreased as the drawing ratio was increased. With increasing the heat-setting temperature, however, the dye uptake and dyeing rate were decreased at an early stage, showing the minimum at $160^{\circ}C-180^{\circ}C$ and then increased above that temperature. The thermal shrinkage of PET filament was decreased as the drawing ratio was increased, while increasing as the heat-setting temperature was increased.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.49-53
• /
• 2009

The oxygen barrier films were formed on poly(ethylene terephthalate) (PET) substrate by a sol-gel process using 3-aminoproprytrimethoxysilane (APTMOS). The effects of solvent type, coating times and incorporation of fumed silica on oxygen permeability coefficient were investigated. The APTMOS coating film prepared from methanol as a solvent exhibited higher oxygen barrier properties than that using THF. The oxygen permeability coefficient of coated film with APTMOS/methanol by coating 7 times was measured to be $2.28{\times}10^{-6}$, while that of PET film was $1.16{\times}10^{-4}$ GPU. The addition of fumed silica does not affect the oxygen barrier properties. It may be explained that silica particles disrupt chain packing, which leads to an increase in free volume for permeation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.283-284
• /
• 2008

Electrical and optical characteristics of indium tin oxide (ITO) and indium zinc oxide (IZO) films without and with $(SiO_2)_3(ZnO)_7$ at.% (SZO) film deposited on poly(ethylene naphthalate) (PEN) and poly(ethylene terephthalate (PET) substrates as a gas barrier layer for flexible display were studied. The ITO and IZO films with SZO gas barrier layer showed the improved properties which were both the high transmittance of average 80% in the visible light range and the decreased sheet resistance as compared to those of ITO and IZO films without SZO layer. Particularly, the PEN substrate with only SZO gas barrier layer had a low water vapor transmission rate (WVTR) of $\sim10^{-3}g/m^2$/day. Thus, we suggest that the SZO film with protection ability against the water vapor permeation can be applied to gas barrier layer for flexible display.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.61-73
• /
• 1995

Inorganic salts have negative or positive effects on the rates of many chemical reactions and also the rates of acidic and alkaline hydrolysis of carboxylic esters. The direction of salt effects on the hydrolysis of ester depends on the charge of esters. It is expected that the rate of the alkaline hydrolysis of Poly(ethylene terephthalte)(PET), polymeric solid carboxytic polyester with carboxyl end group at the polymer end, is also influenced by inorganic salts. In the present work, to clarify the effect of divalent cations on the alkaline hydrolysis of PET, many salts with divalent cations like $MgCl_{2},CaCl_{2},SrCl_{2},BaCl_{2},$ were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous NaOH solution having many salts under various conditions. Some conclusions obtained from the experimental results were summarized as follows. Many salts with various divalent cations increased or decreased the reaction rate of alkaline hydrolysis of PET depending on their electrophilicity, hydration property, ability of ion pair formation, solubility, and the degree of interactions between divalent cations and anions, etc. The hydrolysis was interrupted in the order of $Ca^{+2} and was generally accelerated in the order of $Ba^{+2}. It was inferred from the increase in ΔS$^*$and the decrease in the ΔG$^*$that the divalent cations $Sr^{+2}$ and $Ba^{+2}$attracted by PET increased the collision frequency between carbonyl carbon and $OH^{-}$ion and then accelerated the reaction rate. $Mg^{+2}$and $Ca^{+2}$decreased the reaction rate because of their strong interaction with $OH^{-}$.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.249-253
• /
• 2011

The effect of morphological development in PET/PEN blending on the physical properties of PET/PEN blend film as a flexible substrate was investigated. The two phase morphology was obtained in PET/PEN blends and it caused the improvement of dimensional stability of PET/PEN blend as a flexible substrate. The two phase morphology and crystallinity of PET/PEN blends could be controlled by the transesterification between PET and PEN during the film processing and this macroscopic structural development affected the dimensional stability of PET/PEN blend films. Better dimensional stability was obtained with increasing crystallinity and decreasing the level of transesterification.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.599-604
• /
• 2011

The PET-PEN copolymers have been synthesized and the effect of their morphology on the physical properties of polyester flexible substrate was investigated. It was found that the block sequence of synthesized copolymer was varied depending upon DMT/NDC ratio in polymerization. Higher PET-PEN and PEN block sequence in polyester copolymer resulted in the increase of glass transition temperature and it caused the enhancement of dimensional stability as a polyester flexible substrate. The highest coefficient of thermal expansion(CTE) was obtained when DMT/NDC ratio is 50/50. Synthesized PET-PEN copolymer seems to be acceptable as a flexible substrate since it shows that their optical transmittance at 550 nm is over 80% and thermal weight loss at $280^{\circ}C$ for 1 hr is less than 0.4 wt%.