• 한국습지학회지
• /
• 제8권4호
• /
• pp.33-40
• /
• 2006

The water of rivers and lakes in Korea is the main sources for drinking, industrial and agricultural purposes. However, various pollutants washed-off from watershed area make worse and worse the water quality. Particularly, the changes of land uses in watershed area is the main pollutant sources in many cases in Korea, it is usually called to nonpoint pollution sources. In this reason, the Ministry of Environment are programing the total maximum daily load for four major large rivers in order to improve the water quality by controlling the watershed area. Therefore, this research was performed to estimate the total pollutant input from watershed areas to lakes of Ganwol and Boonam located in Chungnamdo. The AGNPS water quality model and monitoring were used to estimate the pollutant loading rates with unit pollutant concentration of each land use. The main landuse of the research area are forest, wet and dry paddy field and small urban area. The research shows that the pollutant sources in Ganwol and Boonam lakes are from the various landuses. In this manuscripts, the results will provide important informations for mitigating the pollutants to the lakes.

• 한국대기환경학회지
• /
• 제30권3호
• /
• pp.251-260
• /
• 2014

Biomass burning is one of the significant emission source of PM and CO, but a few studies are reported in Korea. Air pollutants emission from biomass burning such as wood stove and boiler, and wood-pellet stove and boiler were estimated in this study. Activity levels related to biomass burning such as fuel types, amount of fuel loading, and location and temporal variation were investigated by field survey over Korea. Fuel loadings were 14.9 kg/day for wood stove, 31.3 kg/day for wood boiler, 12.8 kg/day for wood-pellet stove, 32.5 kg/day for wood-pellet boiler during the season of active use. These were mostly burned in winter season from october to april of next year. Estimated annual emissions from wood stove & boiler were CO 76,677, $NO_x$ 710, $SO_x$ 70, VOC 20,941, TSP 6,605, PM10 2,921, PM2.5 1,851, and NH3 7 ton/yr, respectively. Emissions from wood-pellet stove and boiler were CO 32,798, $NO_x$ 1,830, $SO_x$ 25, VOCs 5,673, TSP 629, PM10 457, PM2.5 344, and $NH_3$ 2 ton/yr, respectively. When the emission estimates are compared with total emissions of the national emission inventory (CAPSS: Clean Air Policy Support System), Those occupy 12.5%, 2.8% of total national emission for CO and PM10, respectively. These results show wood and wood-pellet burning appliances were one of the major source of air pollution in Korea. In future, these types of heaters need to be regulated to reduce air pollution, especially in suburb area.

• 환경위생공학
• /
• 제21권4호
• /
• pp.39-48
• /
• 2006

In Juam basin, the ratio of non-point pollution source among pollutant loading of basin was significantly high, since the utilization level of land was high. In addition, the most pollutants were not treated and flowed out. In this study, the correlation between non-point source pollutants from the forest area and increasing algae was investigated. 1. Chl-a concentration flowed out to runoff from forest area and stream water was low as $0.1{\sim}20.3{\mu}g/{\ell}$ and $0.1{\sim}9.3{\mu}g/{\ell}$, respectively, and chl-a concentration ($0.1{\sim}28.5{\mu}g/{\ell}$) of branch stream was higher $5{\sim}7$ times than that of runoff from forest area. 2. In correlation between runoff from forest area and Juam lake water, annual chl-a concentration of area front Juam dam was higher twice than forest area. 3. In runoff from forest area within Juam basin, flagellate, green, diatom and blue algae occupied $33.0{\sim}41.7%$, $22.2{\sim}30.8%$, $17.3{\sim}22.5%$ and $13.7{\sim}17.6%$, respectively. 4. In runoff from forest area, both green and diatom algae were maintained constantly irrespectively of season, and flagellate algae dominated since August. 5. In characteristics by forest tree types, four types algae were inhabited in mixed forest, and flagellate algae were higher in conifer and broadleaf forest than in other area. And green algae in herbaceous forest were higher than other area.

• 한국물환경학회지
• /
• 제35권1호
• /
• pp.9-18
• /
• 2019

Recently, it was realized that a significant portion of pollution from urban areas originates from non-point sources such as construction sites, washoff from impervious surfaces, and sewage input from unsewered areas and combined sewer overflows. Especially, Urban stormwater runoff is one of the most extensive cause of the deterioration of the water quality in streams located in urban area. The objective of this study was to investigate runoff characteristics of non-point pollutants source at the urban area in the Suyeong River. Water quality variations were investigated at two points of Suyeong River during a period of 10 rainfall events. Concentration difference of non-point pollution source appeared big by precedent number of days of no rainfall. In addition, Event mean Concentration (EMCs) that well represents runoff characteristics of storm water during rainfall, was calculated, and runoff pollutants loading was also examined. The probability distribution of EMCs of BOD, COD, TOC, T-N, T-P, and TSS were analyzed and the mean values of observed EMC and the median values of estimated EMCs compared through probability distribution. Other objectives of this study were the characterization of discharge from non-point source, the analysis of the pollutant loads and an establishment of a management plan for non-point source of Suyeong River. Also, It was established that the most important thing for the administration of non-point pollution source is to come up with the solution for the reduction of effluent at the beginning.

• 지질공학
• /
• 제19권3호
• /
• pp.365-371
• /
• 2009

본 연구에서는 비점오염원의 효율적인 관리방안을 확립하기 위하여 단위재배지로부터의 오염물질 배출특성을 조사하였다. 무강우일수가 상대적으로 길었던 약 20%의 강우사상을 제외한 나머지 강우사상에 대해서는 강우량과 강우에 의한 유출수량의 상관성은 상관계수 0.92로 매우 높았으며, 유출수량이 유출계수에 미치는 영향인자로는 유출직전의 강우강도가 주요인자임을 알 수 있었다. 한편, 유출수로부터 발생하는 오염물질의 EMCs(유량가중평균농도)가 높은 강우사상의 결과로 무강우일수가 길었던 강우사상에서 무강우에 의해 건조된 토양의 영향에 기인한 것임을 알 수 있다. 유출수로부터 발생되는 TSS, BOD, COD, TN 및 TP 등의 부하량은 동일한 강우사상에서 유사한 경향을 나타내므로 부유물질을 제어함으로써 다른 오염물질의 제거도 가능할 것으로 추정된다. 따라서 강우량계급별 유출계수 만을 이용한 오염물질부하량은 많은 오차를 나타낼 것이며, 오염부하 예측시스템을 개발할 때에는 강우량, 무강우일수, 선행강우량 등을 인자로 고려한 재배지토양조건을 충분히 고려하여야 할 것이다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.131-137
• /
• 2010

최근 비점오염원에 대한 관심이 높아지면서, 환경부 및 유관단체를 중심으로 노면 유출수를 포함한 비점오염원(Non point source)에 대한 현황 조사 및 처리 방법에 대한 관심이 증가하고 있다. 고속도로 휴게소 주차장 노면 유출수는 고속도로 본선 노면 유출수보다 유해물질 오염도가 높을 것으로 예상되어, 본 연구는 이 지역의 노면 유출수 오염도 조사를 통해 유출수 평가 및 노면 유출수 저감시설의 저감효과를 분석하여 휴게소 노면유출수 관리방안을 수립하는 것을 목적으로 하고 있다. 휴게소지점에 대한 강우 유출수 분석 결과 포장지역의 특성인 초기강우현상을 볼 수 있었으며, 강우초기에 입자상물질은 중금속과 결합하여 다량 유출되는 특성을 나타내었다. 휴게소 지점의 강우유출수에 대한 오염물질별 EMC에 대한 95% 확신범위로는 TSS 128.2-273.4mg/L, COD 145.4-310.1mg/L, TN 6.1-11mg/L, TP 1.9-2.9mg/L의 범위로 분석되어 고속도로에서 유출되는 강우유출수와 비슷한 수준으로 유출되는 것으로 분석되었으나, 중금속의 경우 고속도로에 비해 고농도의 중금속이 유출되는 것으로 나타났는데, 이것은 차량 정차시 브레이크 패드나 타이어의 마모등에 의한 것으로 판단된다. 휴게소지점에 대한 면적당 발생되는 부하량 통계분석결과, TSS의 평균 부하량은 $1411.6mg/m^2$로 산정되었으며, COD $709.7mg/m^2$, TN $44.0mg/m^2$, TP $10.4mg/m^2$로 산정되었다. 중금속의 경우 Total Cu $12927.4{\mu}g/m^2$, Total Fe $32074.4{\mu}g/m^2$, Total Pb $40371{\mu}g/m^2$, Total Ni $10679.2{\mu}g/m^2$로 산정되었다.

• 도시과학
• /
• 제11권2호
• /
• pp.45-54
• /
• 2022

Recently, regulations on automobile exhaust gas emission are being strengthened. Accordingly, automobile exhaust gas emissions are expected to decrease and continue to decrease. On the other hand, many countries do not yet consider the emission of non-exhaust air pollutants from automobiles as important. Automobile non-exhaust substances are classified into three categories: tire dust emissions, brake wear emissions, and road scattering dust. In particular, in the case of tire dust, research results exist that pollutant emissions increase as the weight of a vehicle increases. Since the weight of trucks varies according to the load and the load along the axles is also different, it can be expected that the emission of PM10 from the tire dust will be different depending on the loading method. Therefore, this study was conducted on the amount of PM10 generated in tire dust considering the axle load of the truck according to the loading method. However, it was confirmed that the total amount of PM10 was less than that all loads are loaded in the front or rear when the load was evenly distributed in the front and rear of the cargo compartment. In particular, if the load is distributed evenly in the front and back of the cargo compartment and the load in the front part is divided into 2 to 6 and loaded, as the number of divided loading increases the amount of PM10 generated decreases. And when the load is divided into 6 pieces, the total amount of PM10 generated is 0.3952g, the minimum value. If the load is divided into 6 or more and loaded evenly, the total PM10 generated continuously increases and converges to about 0.3964g.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1179-1193
• /
• 2018

The purpose of this study at water quality pollutants to propose proper management method for the Osu-A unit watershed which is the influent tributary located upstream of the Sumjin -river among the 13 unit watersheds in the Sumjin-river water system. Analyzed the correlation between flow-pollution loading and the correlation between land use type, BOD and TP items, and analyzed 8-day intervals Cumulative Flow Duration Curve (CFDC) and Load Duration Curve (LDC) to evaluate water quality damage. As a result, both BOD and TP were larger than 1 and the concentration of water pollutants increased with increasing flow. BOD was positively correlated with Urban and Field, and TP was positively correlated with Field with 0.710. As a result of the LDC, BOD was analyzed that the target water quality was achieved with the excess rate of less than 50%, and TP exceeded the target water quality by 50.1%. BOD usually exceeded the standard value (exceedance probability 50%) at low flow zone and On the other hand, TP usually exceeded the standard value at high flow zone. Monthly BOD (April to June) and TP (May to August) exceeded the standard. Sewage Wastewater treatment and non-point pollution control is Osu-A unit watersheds are effective in improving BOD and TP.

• 한국환경농학회지
• /
• 제27권3호
• /
• pp.217-224
• /
• 2008

시설하우스 폐양액 처리를 위한 소형 폐양액처리장치 개발을 위해 소형 폐양액처리장치를 VF-HF, VF-VF, HF-VF 및 HF-HF 조합형으로 구분하여 조합방법별, 여재깊이별 및 폐양액 부하량별로 각각 최적 조건을 조사하였으며, 개발된 시설하우스 폐양액처리장치의 적용성을 검증하기 위해 상기 최적조건하에서 실제 오이, 파프리카 및 딸기 시설하우스에서 배출되는 폐양액의 수처리효율을 조사하였다. 여재 깊이에 따른 오염물질의 수처리 효율은 BOD, COD, SS, T-N 및 T-P 모두에서 깊이가 깊어짐에 따라 수처리효율이 점점 증가하였으며,여재깊이70 cm에서 모든 조합의 BOD, COD 및 SS의 처리효율은 각각 87, 84 및 82% 이상으로 조합방법에 따라 큰 차이 없이 안정적인 수처리 효율을 보였다. T-N 및 T-P의 경우 HF-HF 및 HF-VF 조합형의 처리효율이 타 조합방법에 비해 약간 높았다. 폐양액 부하량에 따른 BOD, COD, SS, T-N 및 T-P의 처리효율은 $150L\;m^{-2}\;day^{-1}{\approx}300L\;m^{-2}\;day^{-1}>450L\;m^{-2}\;day^{-1}$순으로 폐양액의 부하량이 증가함에 따라 수처리 효율이 점점 감소하였다.모든 폐양액 부하량에서의 오염물질 처리효율은HF-VF 및 HF-HF 조합형이 다른 조합형에 비해 높았으며, 특히 총 질소의 경우 HF-HF 조합형이 가장 높은 처리효율을 보였다. 장치의 최적 여재깊이는 70 cm이상이었고, 최적 폐양액 부하이상의 결과를 미루어 볼 때 시설하우스 소형 폐양액처리량은 $300L\;m^{-2}\;day^{-1}$이하이었으며, 최적 조합방법은HF-HF 조합형이었다.

• 산업기술연구
• /
• 제28권A호
• /
• pp.19-22
• /
• 2008

In recent years, much attention has been paid to "Photocatalytic oxidation" as an alternative technique, where the pollutants are degraded by UV-irradiation in the presence of a semiconductor suspension such as titanium dioxide. $TiO_2$ is the most often used photocatalyst due to its considerable photocatalytic activity, high stability, non-environmental impact and low cost. 1n this research, the photocatalytic degradation of humic acid, acetaldehyde and methylene blue in $UV/TiO_2$ systems has been stydied. The effect of calcination temperature for manufacturing of $TiO_2$ photocatalysts and type of photocatalysts on photodegradation has been investigated. Photocatalysts with various metal ions(Mn, Fe, Cu and Pt) loading are tested to evaluate the effects of metal ions impurities on photodegradation. The photodegradation efficiency with $Pt-TiO_2$ or $Fe-TiO_2$ or $Cu-TiO_2$ is higher than Degussa P-25 powder. However, the photodegradation efficiency with $Mn-TiO_2$ is lower than Degussa P-25 powder. The photocatalytic properties of the nanocrystals were strongly dependent upon the crystallinity, particle size, standard reduction potential of various transition metal and electronegativity of various transition metal. As a result photocatalysts with various metal ion loading evaluated the effect of photodegradation.