• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.319-323
• /
• 2002

Recently, new polishing system which was made by magnetic intelligent compound (MAGIC) was invented and, the study is going on for practical use the analysis of factors, that is, the kind of polishing grain, composition ratio of wheel elements, machining frequency, polishing pressure, which the main influence for polishing efficiency are the first step. In this study, analyzed influence of wheel raw material composition ratio on surface roughness.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.417-422
• /
• 2000

In the process of die manufacturing, according to increasing demand of die and molds, the efficient machining of dies and molds has been increased. However, while the cutting process has been automated by the progress of CNC(computer numerical control) and CAD/CAM, the polishing process still depends on the experienced knowledge of an expert. Also, even when workers are skilled in polishing dies. it takes much time to obtain the required roughness and smoothness on the surface of a die. Moreover, many workers gradually avoid doing polishing work because of the poor working conditions caused by dust and noise. Therefore, to improve productivity and to solve the potential shortage of skilled workers, a user-friendly automatic polishing system was developed in this research. The developed polishing system with five degrees of freedom is able to keep the polishing tool normal to the die surface during operation and is able to maintain a pressure constantly by the developed pneumatic system. Also, to evaluate polishing performance of the developend system and find the polishing conditions, the various polishing experiments were carried out.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.714-719
• /
• 2012

In this paper, the polishing force monitoring and the control method were implemented for the polishing machine with the airbag tool. Airbag tool has been known to be adaptable to the curvature variation such as the aspherical and the free-form surface. However, it was necessary to control the tool movement of vertical axis also because of the table rotational wobble and vibration. To solve it by the polishing force control, we installed another stepping motor to the z-axis. And the polishing force was measured with the load cell and controlled by the PID Labview controller. A few hundreds gram of the polishing force were well controlled under 0.8 second of the response time and 5% variation. An experiment was done to clean the edge burrs of the micro channel structure of width $87{\mu}m$ using the polishing force control.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.34-38
• /
• 2008

Commercially available magnetic barrel machines equipped with permanent magnets have certain limitations: work can only be finished effectively in limited areas of the container because permanent magnets are arranged two-dimensionally on the magnet disk. We overcame this problem by developing a new magnetic barrel machine equipped with a three-dimensional magnet arrangement. The effectiveness of the new machine has already been reported; this study improved the machine's polishing ability by changing the polarity of magnets on a magnet block. Polishing experiments confirmed the most effective arrangement of magnets on the magnet block. An alternating arrangement of north and south poles produced far superior polishing characteristics than a uniform arrangement of the same pole facing outward. Alternating polarity probably causes increased quantities of barrel media to work together. Finally, we introduced stronger permanent magnets to the magnet block, and found that the increased magnetic field also improved polishing ability.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.172-176
• /
• 2009

In this paper, new aspherical surface polishing mechanism is suggested to polish aspherical glass lens mold by both airbag polishing tool and reverse-rotational eccentric motion. Up to now, conventional aspherical lens polishing method by the small tool polishing uses the aspherical surface profile and the trajectory of the polishing tool is also controlled. However, full contact concept by airbag polishing tool and no position control make the easy polishing setup and does not need aspherical design profile. An aspherical lens polishing machine was made for this study and a tool mark removal experiment fur the fine-grounded lens mold was successfully performed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.313-318
• /
• 2005

The present study deals design and manufacture of automatic polishing machine that can cut diamond to have 58 facets in a brilliant cutting which has been hardly achieved by a conventional manually operating polishing machine. Upon the 3-dimensional Sarin M/C test and analysis on the diamond processed by the automatic polishing machine developed in this study its proportion and finishing turned out to be better than the diamond processed by the conventional method, by being rated as 'very good'.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.133-139
• /
• 2007

In this paper, optics polishing technology using adaptive tool and eccentric motion mechanism was suggested. Optics polishing can make high reflective and accurate surface. The optics polishing process based on the eccentric motion mechanism has been used to manufacture the ophthalmic lens mold. Also ophthalmic lens mold factory hold conventionally a lot of the curved polishing tools for the versatile mold curves of eye diopters and want to reduce tool numbers. Therefore, a polishing machine with adaptive airbag tool was developed and experimentally verified in view of surface roughness and form accuracy.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.53-60
• /
• 2004

We have developed and manufactured an experimental ultrasonic polishing machine with frequency of 20kHz at the power of vibration 1.7㎾ for effective ultrasonic polishing in processing of high hardness material. Design of the horn is performed by the FEM analysis. The following conclusions were empirically deduced through experimental results to clarify the major elements which affect the surface roughness during the ultrasonic process by following the experimental plans. The ultrasonic polishing machine has been developed in parts of structure part, ultrasonic generator, vibrator. We were able to process the high hardness material without difficulty as a result of ultrasonic polishing by utilizing the groove added step-type horn. Through analyzing by applying the experimental plans, the rotating speed of the horn was determined to be the major factor in influencing the surface roughness. In the case of ceramic, wafer, we were able to obtain good surface roughness when the feed rate and the ultrasonic output were higher. Because the load on slurry particle increases when the ultrasonic output is higher, the processed surface becomes worse in the case of optical glass.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.525-529
• /
• 1999

A cone shape drum polisher was developed to make up for the demerits of conventional CMP apparatus. The developed equipment has several superiorities. First of all, it can achieve uniform velocity profile on all the contact line because of its shape and easy to control the amount of slurry at the position of use. The whole area of wafer surface is exposed to the visual area except the contact line between wafer and drum, hence we can detect polishing end point more easily than any other polishing equipments. Also it has additional merits such as small foot print and polishing load. Polishing characteristics were investigated by developed equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.30-39
• /
• 1995

Now a days, securing skilled workers is very difficult due to the hardworking environment. This situation will be getting worse in the future and also that makes the dies/molds industries difficult. In this research, the automatic fone polishing system which can be directly attached to the spindle of CNC machine is proposed and analyzed. The system is also controlled by the NC progra data created by CAD/CAM system. The usefulness and effectiveness of the developed system are verified more detail through some comparisons between automatic and manual polishing experiments. The experiments show that the automatic polishing is a more useful and effective process than manual one. For the application, this system can be easily used for the polishing process in the area of any fine surface.