• 제목/요약/키워드: poled polymer

검색결과 40건 처리시간 0.027초

Second-Order Optical Nonlinearity of a Polyamide derived from 4,$4^{\prime}$-[Hexafluoroisopropylidene]dianiline and 4-[N,N-Bis(2-carboxyethyl)] amino-$4^{\prime}$-nitrostilbene

  • 김영운;진정일
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권7호
    • /
    • pp.738-742
    • /
    • 1998
  • A new polyamide was prepared from 4,4'-(hexafluoroisopropylidene)di-aniline and 4-[NN-bis(2-carboxyethyl)] amino-4'-nitrostilbene. This polymer was cast into thin films by spin coating cyclohexanone solution. After being poled, the electro-optic coefficients of electrode poled polymer films were measured by the reflection measurement technique using an incident laser beam of 1.3 Jim. The film poled at the field strength of 1.2 V/μm exhibited the electro-optic coefficient (r33) of 5.9 pm/V. The relaxation behavior of the poled polymer film was compared with other reported polymers bearing the same NLO chromophores. Due to stiff and highly polar nature of the backbone and also due to formation of interchain hydrogen bonds, this polymer reveals a slower relaxation characteristics. The polymer is amorphous and soluble in various organic solvents.

극화된 고분자에서 비선형 광학특성의 완화 (The Relaxation of Nonlinear Optical Properties in a Poled Polymer)

  • 정치섭
    • 한국전기전자재료학회논문지
    • /
    • 제23권6호
    • /
    • pp.491-496
    • /
    • 2010
  • The relaxation behavior of aligned electric dipoles in a mixed polymer of P2ANS with P(VDF-TrFE) is studied with optical second harmonic generation (SHG). In this work, a macroscopic noncentrosymmetry of the spin coated film was achieved by an electrical poling. The relaxation of induced polar order of nonlinear optic(NLO) chromophores after poling leads to an insufficient long-term stability of NLO properties. In this work, we develop a new technique to suppress such kind of dipole relaxation in a poled polymer. We found that the poled dipoles in a NLO polymer were effectively immobilized by the internal electric field created by a thermally annealed ferroelectric polymer. The long-term stability in a mixed system of NLO polymer/ferroelectric polymer was successively accomplished by a series of thermal treatments applied to the mixed polymer system at a temperature of $140^{\circ}C$ for at least 1hour after poling.

유기재료의 이상분산을 이용한 파장변환 (Frequency conversion using anomalous dispersion of organic material)

  • 김응수;김민성;강신원
    • 한국광학회지
    • /
    • 제16권1호
    • /
    • pp.103-108
    • /
    • 2005
  • Poled polymer를 사용하여 도파로구조를 제작하고 2차 비선형광학현상에 의해 제 2고조파(SHG)글 발생시켰다. 기본파와 제 2고조파 사이의 위상정합은 poled polymer의 이상분산 특성을 이용하여 기본파 도파모드(TM$_{0}$)로부터 제 2고조파 도파모드(TM$_{0}$)를 실현하였다. 이때 발생되는 제 2고조파의 power는 위상정합이 가능한 다른 모드의 기본파로부터 발생한 제 2고조파의 power보다 크게 됨을 이론적으로 확인하였고, 위상정합이 가능한 도파로를 제작하였다. 기본파로서 Ti-sapphire laser(740 nm)를 사용하여 근자외 영역의 제 2고조파(370 nm)를 관찰하였다.

Synthesis and Characterization of Push-pull Polymers Containing Diphenylsiliane Moiety in the Main Chain

  • Yoon, Kuk-Ro;So, bong-Guen;Lee, Soo-Min
    • Journal of Photoscience
    • /
    • 제12권2호
    • /
    • pp.95-100
    • /
    • 2005
  • We have synthesized an azobenzene-containing polymer (PEA) and a stilbene-containing polymer (PAS) with second-order nonlinear properties. The second harmonic coefficient ($d_{33}$) of the poled polymer films was 84 and 36 pm/V for of PEA and PAS, respectively. The poled state of these polymers was stable at least up to 30 h at room temperature. $T_g$ of these polymers appeared in the range from 120 to $160^{\circ}C$ and onset of initial weight losses in the range from 260 to $270^{\circ}C$. Silicon moieties in the main chain enhanced the solubility of PEA and PAS in common organic solvents such as chloroform, N-methylpyrrolidinone (NMP), N, N-dimethylformamide (DMF), etc.

  • PDF

폴링된 폴리머 광도파로를 이용한 cerenkov형 제2고조파 생성 (Cerenkov type second harmonic genration in poled polymer waveguide)

  • 김응수;조원주
    • 전자공학회논문지D
    • /
    • 제35D권8호
    • /
    • pp.62-68
    • /
    • 1998
  • Optical broadband second harmonic genration (SHG) in thin film waveguide structure was investigated. The copolymer poly(MMA-co-DR1MA) which was consiste dof PMMA (polymethylmethacrylate) and DR 1 (disperse red 1) was spin coated on the pyrex substrate. The green and near UV SHG were observe dfrom the fundamental beam even though the poled polymer has the absorption in second harmonic wavelength range. It was able to genrate SHG by cerenkov type phase matching. Th epoled polymer film thickness was decided by theoretical analysis. The green (532nm) and near UV SHG (370nm) were observed from the Q-switched Nd-YAG laser (1064nm) and Ti-sapphire laser (740nm). It was in good agreement with the experimental results.

  • PDF

박스 캐소드 스퍼터로 성장시킨 고분자 유기발광소자용 비정질 IZO 애노드 박막의 특성 (Characteristics of Amorphous IZO Anode Films for Polymer OLEDs Grown by Box Cathode Sputtering)

  • 문종민;배정혁;정순욱;김한기
    • 한국전기전자재료학회논문지
    • /
    • 제19권6호
    • /
    • pp.552-557
    • /
    • 2006
  • Electrical, optical, surface, and structural properties of amorphous indium-zinc-oxide (a-IZO) grown by box cathode sputtering (BCS) were compared with crystalline indium-tin-oxide (c-ITO) anode films grown by conventional DC sputtering (DCS). Although x-ray diffraction plot of BCS-grown IZO film shows amorphous structure, the optical and electrical properties of a-IZO is comparable to those of c-ITO film. In particular, BCS-grown IZO films shows very smooth surface without defects such as pin hole and cracks because most of the energy of the sputtered atoms was confined in high density plasma region in box cathode gun. Furthermore polymer organic light emitting diodes (POLED) with the a-IZO anode film shows better electrical properties than that of POLED with the c-ITO anode film due to high work function and smooth surface of a-IZO. This suggested that BCS-grown a-IZO film is promising anode materials substituting conventional c-ITO anode in OLED and flexible displays.

폴링된 폴리머 광도파로의 광축을 조절하여 제작한 수동형 편광 변환기 (Passive Polarization Converter Fabricated by Controlling Optic Axis of Poled Polymer Waveguides)

  • 오민철;신상영
    • 전자공학회논문지A
    • /
    • 제32A권12호
    • /
    • pp.166-172
    • /
    • 1995
  • A novel passive TE/TM polarization mode converter is fabricated by using poled polymer waveguides. The optic axis of the poling induced waveguide is slowly rotated by using a slowly varying structure of poling electrodes. Thus the polarization conversion is achieved as the guided mode propagates through the waveguide. The proposed device is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. For the rotation length of 1 mm, the TE polarization of the guided mode is successfully converted to the TM polarization with negligible loss. Based on the simulation results, we fabricated the polarization converter which is tested by using 1.3 $\mu$m laser diode. TE to TM mode conversion is observed with a polarization extinction ratio higher than 30 dB, and the excess loss is less than 1 dB. The polarization conversion is relatively insensitive to wavelength since the device contains no periodic structures. These devices are easier to fabricate than others containing periodic structures.

  • PDF