• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.207-218
• /
• 2004

Lomilik Seamount in the west Pacific was seismically surveyed and photographed to illuminate the bottom topography, the condition of manganese crust, and the characteristics of sedimentary environment. Lomilik Seamount has a NW-SE elongated bottom topography with steep slopes in the NESW direction part. Even though the steep slopes of the seamount are devoid of deposits, the summit area and gentle slope of the seamount are covered with thick deposits. The seismic data indicate that Lomilik Seamount is a flat-topped and step-faulted guyot of volcanic origin. Deep-sea camera photographs show that much of the seafloor is rippled in symmetrical and asymmetrical patterns. The traces of biological activity were distinct on gentle seafloor suggesting the low-energy bottom conditions. Some photographs also show outcrops encrusted with manganese crusts. Sedimentary environments in the Lomilik Seamount appear have been governed by regional morphology and strong bottom current.

• Journal of ILASS-Korea
• /
• v.19 no.2
• /
• pp.55-63
• /
• 2014

Pyrolysis oil (PO), also known as Bio crude oil (BCO), has the potential to displace significant amounts of fuels that are currently derived from petroleum sources. PO has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of PO in a diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the PO. One of the easiest way to adopt PO to diesel engine without modifications is emulsification of PO with the fuels that has higher cetane number. However, PO that has high amount of polar chemicals is immiscible with non polar hydrocarbons of diesel. Thus, to stabilize a homogeneous phase of diesel-PO blends, a proper surfactant should be used. In this study, a DI diesel engine operated with diesel and diesel-PO emulsions was experimentally investigated. Performance and gaseous & particle emission characteristics of a diesel engine fuelled by diesel-PO emulsions were examined. Results showed that stable engine operation was possible with the emulsions and engine output power was comparable to diesel operation.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.5 no.1
• /
• pp.22-39
• /
• 2001

This study is designed to compare the effect of a needle with the magnet on body. We took the skin temperature of the belly with digital infrared thermographic imaging while we sticked needle and apply magnets on L14. We made experiments on 40 healthy male volunteers for one month. We classified control group not acupuncture or magnet adhering(CON). acupuncture group on left and right L14(LA). and the permanent magnet group adhering to left and right(LM). And LM is divided into S-polar permanent magnet group(LMS) and N-polar permanent magnet group adhering to left and right L14(LMN). When we observed that temperature changed with time, the skin temperature of th belly in CON descended significantly but LM, LMS and LMN is not changed significantly. As mentioned above. we observed that the needles on L14 affected the change of temperature on the belly, and conjectured that the appliance of magnets had the same results. If the mechanism depends on the meridian of body and energy. we suppose that the appliance of magnets and needles has same effects.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.400-405
• /
• 2011

ZnO nanotube arrays were synthesized by a two-step process: electrodeposition and selective dissolution. In the first step, ZnO nanorod arrays were grown on an Au/Si substrate by using a homemade electrodeposition system. ZnO nanorod arrays were then selectively dissolved in an etching solution composed of 0.125 M NaOH, resulting in hollow ZnO nanotube arrays. It is suggested that the formation mechanism of the ZnO nanotube arrays might be attributed to the preferred surface adsorption of hydroxide ion ($OH^{-1}$) on a positive polar surface followed by selective dissolution of the metastable Zn-terminated ZnO (0001) polar surface caused by the difference in the surface energy per unit area between the ZnO nanorod and nanotube.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.237-250
• /
• 2005

To investigate the air mass modification related with Yeongdong Heavy snowfall events, we examined sensible and latent heat fluxes on the East Sea, the energy exchange between atmosphere and ocean in this study. Sensible and latent heats were calculated by a bulk aerodynamic method, in which NCEP/NCAR reanalysis data and NOAA/AVHRR weekly SST data with high resolution were used. Among winter precipitation events in the Yeongdong region, 19 heavy precipitation events $(1995{\sim}2001)$ were selected and classified into three types (mountain, cold-coastal, and warm types). Mountain-type precipitation shows highly positive anomalies of sensible and latent heats over the southwestern part of the East Set When separating them into the two components due to variability of wind and temperature/ specific Humidity, it is shown that the wind components are dominant. Cold-coastal-type precipitation also shows strong positive anomalies of sensible and latent heats over the northern part and over the central-northern part of the East Sea, respectively. It is shown that the sensible heat anomalies are caused mostly by the decrease of surface air temperature. So it can be explained that cold-coastal-type precipitation is closely related with the air mass modification due to cold air advection over warm ocean surface. But in warm-type precipitation, negative anomalies are found in the sensible and latent heat distributions. From this result, it may be postulated that warm-type precipitation is affected by the internal process of the atmosphere rather than the atmosphere-ocean interaction.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.65-72
• /
• 1998

This paper presents a fast calculation method for evaluating of voltage stability margin (MW) using the line flow equation in polar form. Here, Line flow equations $(P_{ij},\;Q_{ij}$ are comprised of state variable, $V_i,\;{\Delta}_i,\;V_j$ and ${Delta}_j$, and line parameter, r and x. using the feature of polar coordinate, these becomes one equation with two variables, $V_j,;V_j$. Moreover, if bus j is slack or generator bus, which is specified voltage magnitude in load flow calculation, it becomes one equation with one variable $V_ i $ that is, may be formulated with the second-order equation for $V^2_i$. Therefore, multiple load flow solutions may be obtained with simple computation. The obtained load flow multiple solutions are used for evaluating of voltage stability through sensitivity analysis or its closeness. Also, the method is proposed to calculate for voltage stability margin considering shunt capacitor, which is important element for evaluating of voltage stability. The proposed method was validated to sample systems.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.1-8
• /
• 2001

Epoxy composites filled with natural zeolite was prepared to investigate the effects of silane coupling agent, ${\gamma}$-APS (${\gamma}$-aminopropyltriethoxysilane)on the surface free energy, tensile properties and interfacial morphology. The value of Lifshitz-van der Waals component, ${\gamma}{\frac{LW}{SV}}$ for polar was $19.22mJ/m^2$ and increased, while that of Lewis acid-base component, ${\gamma}{\frac{AB}{SV}}$ for polar was $15.27mJ/m^2$ and decreased with the increasing content of ${\gamma}$-APS treatment. It is due that the surface of the zeolite is more coated by hydrophobic of alkyl group than hydrophilic amine or hydroxyl group. The tensile strength and Young's modulus of epoxy system were improved by the treatment with ${\gamma}$-APS due to the strong interface bonding, which was confirmed by SEM.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.22-28
• /
• 2005

In this work, the effect of oxygen plasma treatment of nano-scaled silica on the mechanical interfacial properties and thermal stabilities of the silica/rubber composites was investigated. The surface properties of the silica were studied in X-ray photoelectron spectroscopy (XPS) and contact angles. And, their mechanical interfacial properties and thermal stabilities of the composites were characterized by tearing energy ($G_{IIIC}$) and thermogravimetric analysis (TGA), respectively. As a result, it was found that the introduction rate of oxygen-containing polar functional groups onto the silica surfaces was increased by increasing the plasma treatment time, resulting in improving the tearing energy. Also, the thermal stabilities of the composites were increased by increasing the treatment time. These results could be explained that the polar rubber, such as acrylonitrile butadiene rubber (NBR), showed relatively a high degree of interaction with oxygen-containing functional groups of the silica surfaces in a compounding system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.39-42
• /
• 2023

최근 온라인 게임 산업이 급속도로 확장됨과 더불어 Gamebot과 같은 비정상적인 프로그램으로 인한 게임 서비스 피해사례가 급격하게 증가하고 있다. 특히, 대표적인 게임 장르 중 하나인 FPS(First-Person Shooter)에서 Aimbot의 사용은 정상적인 이용자들에게 재미 요소를 잃어버리게 하고 상대적 박탈감을 일으켜 게임의 수명을 줄이는 원인이 된다. 비정상 게임 이용자의 근절을 위해서 메모리 변조 및 불법 변조 프로그램 접근 차단 기법과 불법 프로그램 사용의 패턴 모니터링과 같은 기법들이 제안되었지만, 우회 프로그램 및 새로운 패턴을 이용한 비정상적인 프로그램의 개발에는 취약하다는 단점이 있다. 따라서, 본 논문에서는 정상적인 게임 이용자의 패턴만 학습함으로써 비정상 이용자 검출을 가능하게 하는 딥러닝 기반 단일 클래스 분류 기법을 제안하며, 가장 빈번하게 발생하는 치트(Cheat) 유형인 FPS 게임 내 Aimbot 사용 감지에 초점을 두었다. 제안된 비정상 게임 이용자 감지 시스템은 정상적인 사용자의 마우스 좌표를 데카르트 좌표계(Cartesian coordinates)와 극좌표계(Polar coordinates)의 형태로 패턴을 추출하는 과정과 정상적인 마우스 동작 기록으로 부터 학습된 LSTM 기반 Autoencoder의 복원 에러에 따른 검출 과정으로 구성된다. 실험에서 제안된 모델은 FPS 게임 내 마우스 동작을 기록한 공개 데이터셋인 CSGO 게임 데이터셋으로 부터 학습되었으며, 학습된 모델의 테스트 결과는 데카르트 좌표계로부터 훈련된 제안 모델이 비정상 게임 이용자를 분류하는데 적합함을 입증하였다.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.63-69
• /
• 2016

Poly(butylene terephthalate)(PBT) surface was modified by UV/ozone irradiation and the effect of UV energy on the surface properties of the irradiated PBT films were characterized by the reflectance, surface roughness, contact angles, ESCA, and ATR analyses of the film surface. The surface reflectance, at the short wavelength of visible spectrum of particularly 400nm, decreased with increasing UV energy. And the irradiation roughened the film surface uniformly in the nano scale. The maximum surface roughness increased from 110nm for the unirradiated sample to 303nm at the UV energy of $10.6J/cm^2$. The surface energy of PBT film increased from $50.5mJ/m^2$ for the unirradiated PBT to $58.8mJ/m^2$ at the irradiation of $21.2J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups containing oxygens such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The increased dyeability of the modified film to cationic dyes may be resulted from the photochemically introduced anionic and dipolar dyeing sites on the PBT films surfaces.