• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제22권10호
• /
• pp.537-545
• /
• 2016

최근 스마트워치 등 원형 기기들이 출시되고, 빅데이터 시대로 데이터 시각화 분야가 주목을 받으면서 글자의 원형 배치에 대한 요구가 증가하고 있다. 하지만 현재 웹문서에서 글자를 원형이나 부채꼴로 배치하는 방법을 따로 지원하지 않는다. 이에 따라 본 연구는 웹브라우저 환경에서 CSS 스타일시트와 HTML로 표현되어 있는 웹문서 내의 글자를 원이나 부채꼴의 중심을 기준으로 하는 극좌표계로 배치할 수 있도록 CSS3 사양을 확장하였다. CSS3 사양 확장에 앞서 사례조사를 통하여 극좌표계 표현에 대한 요구사항을 분석하였으며 기존의 사각형이 아닌 부채꼴 서식모델을 제안하고 이에 맞추어 세부적인 텍스트 배치 사양을 정의하였다. 또한, 확장된 CSS3 사양으로 작성한 콘텐츠를 기존 브라우저에서 확인할 수 있도록 전처리기를 구현하고 샘플 콘텐츠를 작성하여 제안한 확장사양의 적합성을 검증하였다.

• 한국HCI학회논문지
• /
• 제1권2호
• /
• pp.27-33
• /
• 2006

본 논문은 회전 및 천이 불변 이미지 텍스처 검색의 새로운 방식을 소개한다. 주파수 영역의 극 좌표계에서 동일한 공간주파수에서 각도방향으로 투영을 함으로써 각도 투영법을 만들어 냈으며, 제안된 각도 투영법을 이용하여 주파수 영역에서 푸리에 계수의 합과 표준 편차를 특징벡터로 이용하였다. 각도 투영법을 쉽게 구현하기 위하여 극 좌표계에서 라돈변환이 수행된다. 실험 시 MPEG-7 데이터를 이용하였으며 그 결과는 여러 텍스처 이미지를 검 색하는데 있어서 특징을 잘 구별해 내는 결과를 보여준다. 또한 제안된 회전 및 천이불변 특징 추출 알고리듬은 등 방성 텍스처나 국부적인 방향성을 보이는 텍스처 영상 검색에서 효율적인 검색률을 보인다.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.239-243
• /
• 2010

The putting stroke accounts for 40~50% of total stroke for a golf rounding and most golfers have difficulties on the puting. Studies for the putting stroke have been conducted by analyzing various factors such as kinematics, kinetics, psychologic and physiologic parameters. A lot of devices were developed to support the studies. However there was no appropriate method to measure the position of the ball quantitatively. In this study, we developed a new measurement system to measure and evaluate the putting result. The developed system uses a USB camera to take the 2-dimensional image of the surface including the hole cup at the center of the image and the ball. The position of the ball is extracted as a set of distance and angle in polar coordinate system. We evaluated the new system with an indoor set-up for putting experiments and the system provided accurate measurement results. The proposed system can be combined with the other measurement systems such as 3D motion capture system and force plate without any restriction.

• 대한원격탐사학회지
• /
• 제30권5호
• /
• pp.547-557
• /
• 2014

본 논문에서는 영상 등록을 위한 유사도 계산에 사용되는 원형 템플릿의 설계 방법을 제안한다. 원형 템플릿은 영상의 이동 및 회전 변환에 불변한 성질을 가지고 있어 기준 영상 및 관측 영상 사이에 이동 및 회전 변환이 존재하더라도 영상 등록 제어점을 정확하게 정합하는 장점이 있다. 기준 영상의 제어점을 중심으로 일정한 거리 이내에 다수의 원주를 구성하고 각 원주 위에 일정한 간격으로 위치하는 화소들로 이루어지는 원형 템플릿을 생성하고 이를 이차원 이산 극좌표 행렬(Discrete Polar Coordinate Matrix, DPCM)으로 구성한다. 관측 영상에서도 동일한 형태의 원형 템플릿을 생성하고 탐색 범위 내의 각 위치에서 관측 영상의 원형 템플릿을 0도에서 360도 범위 내에서 일정 각도 간격으로 회전시키면서 극좌표 행렬을 생성하고 기준 영상의 극좌표 행렬과의 유사도를 Mutual Information을 이용해서 계산한다. 탐색 범위 내의 각 위치와 회전 각도에 대한 Mutual Information이 최대가 되는 화소를 정합쌍으로 결정한다. 제안한 알고리즘은 서로 다른 두 시기에 촬영한 KOMPSAT-2 영상에 적용하여 영상의 회전 변화 조건하에서 우수한 정합 성능을 보임을 확인하였다.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.429-433
• /
• 1991

The photoinduced electron transfer reactions of N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) in various polar solvents were studied by measuring time-resolved fluorescence. The temperature dependence on the fluorescence decay rate in acetonitrile, methanol, ethanol and buthanol was carried out to obtain the activation energy and Arrehnius factor for the photoinduced electron transfer reaction. It was found that as the dielectric constant of the solvent increases, the activation energy and the reaction rate increase. This implys that the Arrehnius factor is important in controlling the photoinduced electron transfer reaction rate. In water, TMPD exists in three forms (cationic, protonated and neutral forms) due to the high dielectric constant and strong proton donating power of water. The photoinduced electron transfer reaction was found to be very fast (< 50 ps) and also the long liverd component in the fluorescence decay profile attributable to the photoexcited protonated form of TMPD was observed. Probably, the reaction pathway and the reaction coordinate seem to be different depending on the solvents studied here.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.470-483
• /
• 1990

Turbulent jet in a crossflow, issuing from a row of holes on a convex surface of 90 .deg. bend duct, is predicted by a 3-dimensional numerical method. The Cartesian coordinate system in adopted in upstream and downstream tangents and the cylindrical polar coordinate system in curved region. The Reynolds stresses and heat fluxes are obtained from a standard k-e model in the core region and van Driest model in the vicinity of the wall. The governing equations are discretized by a finite volume method and solutions are obtained by a locally elliptic calculation procedure. Pressure and convective terms are treated by SIMPLE algorithm and hybrid scheme respectively. A vortex initially induced by the injected jet has been built up due to the interaction with the secondary flow caused by pressure gradient and centrifugal force. The vortex structure has a strong influence on the wall cooling effectiveness. Another vortex like horseshoe is formed in the vicinity of the injection hole and its strength is getting weak as it moves downward.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.7-14
• /
• 2005

In this study, the shallow water equations on the sphere is simulated by the proposed method which has high spatial resolution and is based on the CIP(Cubic Interpolated Pseudoparticle) method. The governing equations are approximated on the longitude-latitudinal coordinate system. To avoid the problems resulting from the convergence of the meridians toward high-latitude and singularities on the poles, the semi-Lagrangian and finite volume method are employed. in addition, the CIP method is employed to solve the advection equations and is extended to apply on the equations in the polar coordinate system. The mathematical formulation and numerical results are also described. To verify of the efficiency, accuracy and capability of proposed algorithm, the standard test cases proposed bv Williamson et. al are simulated and the results are compared with other results. As a result, it is found that the present scheme gives a good properties in preserving shapes of solution and settles the pole problems in solving the shallow water equations on the sphere.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2187-2196
• /
• 2005

In this paper, the stiffness and the mass matrices for the in-plane motion of a thin circular beam element are derived respectively from the strain energy and the kinetic energy by using the natural shape functions of the exact in-plane displacements which are obtained from an integration of the differential equations of a thin circular beam element in static equilibrium. The matrices are formulated in the local polar coordinate system and in the global Cartesian coordinate system with the effects of shear deformation and rotary inertia. Some numerical examples are performed to verify the element formulation and its analysis capability. The comparison of the FEM results with the theoretical ones shows that the element can describe quite efficiently and accurately the in-plane motion of thin circular beams. The stiffness and the mass matrices with respect to the coefficient vector of shape functions are presented in appendix to be utilized directly in applications without any numerical integration for their formulation.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.147-157
• /
• 1999

An analytical methodology for solving antiplane problem of anisotropic materials is proposed and discussed in detail in this study. The material considered in this study possesses a symmetry plane at z=0. The relationship between the problems of anisotropic materials and the corresponding isotropic problems are established by Ma (1996) on the basis of the general solutions for the shear stresses and displacement in both the polar and Cartesian coordinate systems. This implies that any solution of an anisotropic problem can be obtained by solving a corresponding isotropic problem. In this study some examples and numerical results are presented as an explanation of how the complicated anisotropic problem could be solved by the associated simpler isotropic problem.