• Journal of Preventive Medicine and Public Health
• /
• v.55 no.6
• /
• pp.549-558
• /
• 2022

Objectives: Poor complementary feeding practices have consistently contributed to the burden of child undernutrition in Indonesia. This study aimed to estimate the prevalence and predictors of the time of the introduction of solid, semi-solid, and soft foods (ISSSF), minimum dietary diversity (MDD), minimum meal frequency (MMF), and minimum acceptable diet (MAD). Methods: We analyzed 4804 last-born infants aged 6-23 months from the 2017 Indonesia Demographic and Health Survey, which employed multistage cluster random sampling. The outcomes were calculated based on the 2021 World Health Organization/United Nations Children's Fund guidelines. The predictors of the 4 complementary feeding indicators were assessed using multivariate Poisson regression with robust variance adjusting for potential confounders and study design. Results: The prevalence of ISSSF, MDD, MMF, and MAD was 86.1%, 54.3%, 71.8%, and 37.6%, respectively, with younger children less likely to meet 3 out of the 4 outcomes. Parental education, the presence of a birth attendant, and maternal media consumption were among the predictors of MDD and MAD. Children from families with higher income were more likely to meet MDD than those from low-income households (adjusted prevalence ratio [aPR], 1.16; 95% confidence interval [CI], 1.05 to 1.28). Living in an urban area was positively associated with MMF (aPR, 1.09; 95% CI, 1.04 to 1.15) and MAD (aPR, 1.12; 95% CI 1.02 to 1.24). In eastern regions, the prevalence of children achieving MDD and MAD was lower than in those living in Java and Bali. Conclusions: It is crucial that more attention and efforts are made to improve the recommended practices throughout Indonesia, since the prevalence of adequate complementary feeding practices remains low.

• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.91-106
• /
• 2022

This paper has focused on presenting a three dimensional theory of elasticity for free vibration of 3D-graphene foam reinforced polymer matrix composites (GrF-PMC) cylindrical panels resting on two-parameter elastic foundations. The elastic foundation is considered as a Pasternak model with adding a Shear layer to the Winkler model. The porous graphene foams possessing 3D scaffold structures have been introduced into polymers for enhancing the overall stiffness of the composite structure. Also, 3D graphene foams can distribute uniformly or non-uniformly in the shell thickness direction. The effective Young's modulus, mass density and Poisson's ratio are predicted by the rule of mixture. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. Because of using two-dimensional generalized differential quadrature method, the present approach makes possible vibration analysis of cylindrical panels with two opposite axial edges simply supported and arbitrary boundary at the curved edges. It is explicated that 3D-GrF skeleton type and weight fraction can significantly affect the vibrational characteristics of GrF-PMC panel resting on two-parameter elastic foundations.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.71-77
• /
• 2023

Background: This study investigated the relationship between trauma exposure and suicidal ideation. Moreover, this study examines the moderating roles of organizational climate on the association between trauma exposure and suicidal ideation in Korean male firefighters. Methods: A total of 15,104 male firefighters who completed a questionnaire were analyzed. The data were obtained using an online self-administered questionnaire from the Firefighter Research on Enhancement of Safety and Health Study. Poisson regression analysis was performed to determine the effects of trauma exposure on suicidal ideation and the moderating effect of organizational climate. Results: The results showed that 389 firefighters (2.6%) responded that they had experienced suicidal ideation. In the final model, trauma exposure was positively related to suicidal ideation (adjusted risk ratio [aRR], 1.076; 95% confidence interval [CI]: 1.051-1.103), and organizational climate was negatively associated with suicidal ideation (aRR, 0.772; 95% CI: 0.739-0.806). Additionally, the interaction term (trauma exposure × organizational climate) was related to suicidal ideation (aRR, 1.016; 95% CI: 1.009-1.023). Conclusions: This study suggests that trauma exposure might play a significant role in developing suicidal ideation and that positive organizational climate moderates the negative effects of trauma exposure on suicidal ideation among firefighters. It is necessary to perform a follow-up study of various intervention strategies to maintain a healthy organizational climate or work environment. Such interventions should promote lasting trust within teams, provide social support and belonging, and nurture job value.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.375-389
• /
• 2023

In this study, free vibration analysis of functionally graded (FG) porous truncated conical shell panels reinforced by graphene platelets (GPLs) has been investigated for the first time. Additionally, the effect of three different types of porosity distribution and five different types of GPLs patterns on dynamic response of the shell are also studied. Halpin-Tsai micromechanical model and Voigt's rule are used to determine Young modulus, shear modulus and Poisson's ratio with mass densities of the shell, respectively. The main novelties of present study are: applying 3D elasticity theory and the finite element method in conjunction with Rayleigh-Ritz method to give more accurate results unlike other simplified shell theories, and also presenting a general 3D solution in cylindrical coordinate system that can be used for analyses of different structures such as circular, annular and annular sector plates, cylindrical shells and panels, and conical shells and panels. A convergence study is performed to justify the correctness of the obtained solution and numerical results. The impact of porosity and GPLs patterns, the volume of voids, the weight fraction of graphene nanofillers, semi vertex and span angles of the cone, and various boundary conditions on natural frequencies of the functionally graded panel have been comprehensively studied and discussed. The results show that the most important parameter on dynamic response of FG porous truncated conical panel is the weight fraction of nanofiller and adding 1% weight fraction of nanofiller could increase 57% approximately the amounts of natural frequencies of the shell. Moreover, the porosity distribution has great effect on the value of natural frequency of structure rather than the porosity coefficient.

• Structural Engineering and Mechanics
• /
• v.84 no.4
• /
• pp.437-452
• /
• 2022

For the first time, the higher-order shear and normal deformable plate theory (HOSNDPT) is used for the vibration and flutter analyses of the multilayer functionally graded graphene platelets reinforced composite (FG-GPLRC) plates under supersonic airflow. For modeling the supersonic airflow, the linear piston theory is adopted. In HOSNDPT, Legendre polynomials are used to approximate the components of the displacement field in the thickness direction. So, all stress and strain components are encountered. Either uniform or three kinds of non-uniform distribution of graphene platelets (GPLs) into polymer matrix are considered. The Young modulus of the FG-GPLRC plate is estimated by the modified Halpin-Tsai model, while the Poisson ratio and mass density are determined by the rule of mixtures. The Hamilton's principle is used to obtain the governing equations of motion and the associated boundary conditions of the plate. For solving the plate's equations of motion, the Galerkin approach is applied. A comparison for the natural frequencies obtained based on the present investigation and those of three-dimensional elasticity theory shows a very good agreement. The flutter boundaries for FG-GPLRC plates based on HOSNDPT are described and the effects of GPL distribution patterns, the geometrical parameters and the weight fraction of GPLs on the flutter frequencies and flutter aerodynamic pressure of the plate are studied in detail. The obtained results show that by increasing 0.5% of GPLs into polymer matrix, the flutter aerodynamic pressure increases approximately 117%, 145%, 166% and 196% for FG-O, FG-A, UD and FG-X distribution patterns, respectively.

• Computers and Concrete
• /
• v.32 no.5
• /
• pp.465-474
• /
• 2023

The point load test (PLT) is a widely-used alternative method in the field to determine the uniaxial compressive strength due to its simple testing machine and procedure. The point load test index can estimate the uniaxial compressive strength through conversion factors based on the rock types. However, the mechanism correlating these two parameters and the influence of the mechanical properties on PLT results are still not well understood. This study proposed a theoretical model to understand the mechanism of PLT serving as an alternative to the UCS test based on laboratory observation and literature survey. This model found that the point load test is a self-confined compression test. There is a compressive ellipsoid near the loading axis, whose dilation forms a tensile ring that provides confinement on this ellipsoid. The peak load of a point load test is linearly positive correlated to the tensile strength and negatively correlated to the Poisson ratio. The model was then verified using numerical and experimental approaches. In numerical verification, the PLT discs were simulated using flat-joint BPM of PFC3D to model the force distribution, crack propagation and BPM properties' effect with calibrated micro-parameters from laboratory UCS test and point load test of Berea sandstones. It further verified the mechanism experimentally by conducting a uniaxial compressive test, Brazilian test, and point load test on four different rocks. The findings from this study can explain the mechanism and improve the understanding of point load in determining uniaxial compressive strength.

• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.21-27
• /
• 2024

Purpose: This study aimed to analyze the stress distribution and deformation in implant abutments made from titanium (Ti-6Al-4V), zirconia, and polyetheretherketone (PEEK), including their screws and fixtures, under various loading conditions using finite element analysis (FEA). Methods: Three-dimensional models of the mandible with implant abutments were created using Siemens NX software (NX10.0.0.24, Siemens). FEA was conducted using Abaqus to simulate occlusal loads and assess stress distribution and deformation. Material properties such as Young's modulus and Poisson's ratio were assigned to each component based on literature and experimental data. Results: The FEA results revealed distinct stress distribution patterns among the materials. Titanium alloy abutments exhibited the highest stress resistance and the most uniform stress distribution, making them highly suitable for long-term stability. Zirconia abutments showed strong mechanical properties with higher stress concentration, indicating potential vulnerability to fracture despite their aesthetic advantages. PEEK abutments demonstrated the least stress resistance and higher deformation compared to other abutment materials, but offered superior shock absorption, though they posed a higher risk of mechanical failure under high load conditions. Conclusion: The study emphasizes the importance of selecting appropriate materials for dental implants. Titanium offers durability and uniform stress distribution, making it highly suitable for long-term stability. Zirconia provides aesthetic benefits but has a higher risk of fracture compared to titanium. PEEK excels in shock absorption but has a higher risk of mechanical failure compared to both titanium and zirconia. These insights can guide improved implant designs and material choices for various clinical needs.

• Computers and Concrete
• /
• v.33 no.4
• /
• pp.399-407
• /
• 2024

This study nondestructively examined the evolution of crack density in ultra-high performance concrete (UHPC) upon cyclic loading. Uniaxial compression was repeatedly applied to the cylindrical specimens at levels corresponding to 32% and 53% of the maximum load-bearing capacity, each at a steady strain rate. At each stage, both P-wave and S-wave velocities were measured in the absence of the applied load. In particular, the continuous monitoring of P-wave velocity from the first loading prior to the second loading allowed real-time observation of the strengthening effect during loading and the recovery effect afterwards. Increasing the number of cycles resulted in the reduction of both elastic wave velocities and Young's modulus, along with a slight rise in Poisson's ratio in both tested cases. The computed crack density showed a monotonically increasing trend with repeated loading, more significant at 53% than at 32% loading. Furthermore, the spatial distribution of the crack density along the height was achieved, validating the directional dependency of microcracking development. This study demonstrated the capability of the crack density to capture the evolution of microcracks in UHPC under cyclic loading condition, as an early-stage damage indicator.

• Safety and Health at Work
• /
• v.15 no.2
• /
• pp.208-212
• /
• 2024

Background: Traffic accidents involving professional drivers have serious societal repercussions. Unique occupational stressors and health risks exacerbate the likelihood of traffic accidents among professional drivers. This study explores the association between presenteeism-impaired work performance due to working while unwell-and traffic accident risk among professional taxi drivers in Japan. Methods: A prospective cohort study was conducted from June 2022 to February 2023, involving taxi drivers from a single company in Fukuoka Prefecture, Japan. Presenteeism was assessed using the Work Functioning Impairment Scale (WFun). Primary outcome involved the number of self-reported minor traffic accidents. The incidence rate ratio (IRR) of minor traffic accident occurrences was estimated using a Poisson regression analysis, adjusted for confounders including sex, age, and driving experience. Results: Of 838 targeted drivers, 435 were included in the analysis. Higher baseline work functioning impairment was associated with a significant trend of increasing IRR of minor traffic accidents (p for trend = 0.045). A dose-response relationship was seen between the degree of presenteeism and incidence rate of minor traffic accidents. Conclusion: Higher levels of presenteeism were associated with an increased risk of traffic accidents among taxi drivers. The findings underscore the need for socio-economic support and prioritized health management to mitigate traffic accident risk among professional drivers. This study highlights the importance of managing non-critical health issues alongside serious health conditions for safer driving practices among professional drivers in Japan.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.33-40
• /
• 2011

This study focuses on having a temperature and water pressure effects on the change of material properties of rocks. Granite and limestone specimens from Gagok Mine were thermally treated with predetermined temperatures of 200, 300, 400, 500, 600 and $700^{\circ}C$ (excepting $700^{\circ}C$ for limestone) to estimate the reduction of material properties of rocks caused by heat. Specific gravity, effective porosity, elastic wave velocity, uniaxial compressive strength, Young's modulus and Poisson's ratio for pre-heated specimens were measured. With increasing temperature, material properties of both rock specimens change sequentially. Significant changes of specific gravity, effective porosity and elastic wave porosity occur above $400^{\circ}C$ for granite and $300^{\circ}C$ for limestone. Changes of uniaxial compressive strength, Young's modulus and Poisson's ratio seem to be similar to those of physical properties. GSI of 500, 600 and $700^{\circ}C$ specimens inferred by using uniaxial compressive strength and Young's modulus of preheated granite specimens is found to be 81, 66 and 58 each. In case of pre-heated limestone specimens of 400, 500 and $600^{\circ}C$, the corresponding GSI is 76, 71 and 65 each. 500, 600 and $700^{\circ}C$ granite specimens and 400, 500 and $600^{\circ}C$ limestone specimens were pressurized to 7.5 MPa and their effective porosity, elastic wave velocity, uniaxial compressive strength and Young's modulus were measured. The average value of material properties (mentioned above) of 500, 600 and $700^{\circ}C$ granite specimens under water pressure compared with material properties of non-pressurized pre-heated specimens exhibits the reduction of 7.6, 11.3 and 14.9%, respectively. In case of 400, 500 and $600^{\circ}C$ limestone specimens under water pressure, the average value of material properties decreases by 8.2, 13.8 and 21.9%, respectively.