• Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.34-44
• /
• 2016

Background: Little is known about how chemical water quality is associated with ecological stream health in relation to landuse patterns in a watershed. We evaluated spatial characteristics of water quality characteristics and the ecological health of Dongjin-River basin, Korea in relation to regional landuse pattern. The ecological health was assessed by the multi-metric model of Index of Biological Integrity (IBI), and the water chemistry data were compared with values obtained from the health model. Results: Nutrient and organic matter pollution in Dongjin-River basin, Korea was influenced by land use pattern and the major point sources, so nutrients of TN and TP increased abruptly in Site 4 (Jeongeup Stream), which is directly influenced by wastewater treatment plants along with values of electric conductivity (EC), bacterial number, and sestonic chlorophyll-a. Similar results are shown in the downstream (S7) of Dongjin River. The degradation of chemical water quality in the downstream resulted in greater impairment of the ecological health, and these were also closely associated with the landuse pattern. Forest region had low nutrients (N, P), organic matter, and ionic content (as the EC), whereas urban and agricultural regions had opposite in the parameters. Linear regression analysis of the landuse (arable land; $A_L$) on chemicals indicated that values of $A_L$ had positive linear relations with TP ($R^2=0.643$, p < 0.01), TN ($R^2=0.502$, p < 0.05), BOD ($R^2=0.739$, p < 0.01), and suspended solids (SS; ($R^2=0.866$, p < 0.01), and a negative relation with TDN:TDP ratios ($R^2=0.719$, p < 0.01). Conclusions: Chemical factors were closely associated with land use pattern in the watershed, and these factors influenced the ecological health, based on the multimetric fish IBI model. Overall, the impairments of water chemistry and the ecological health in Dongjin-River basin were mainly attributes to point-sources and land-use patterns.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.463-470
• /
• 2015

When a camera installed on a vehicle is used, estimation of the camera pose including tilt, roll, and pan angle with respect to the world coordinate system is important to associate camera coordinates with world coordinates. Previous approaches using huge calibration patterns have the disadvantage that the calibration patterns are costly to make and install. And, previous approaches exploiting multiple vanishing points detected in a single image are not suitable for automotive applications as a scene where multiple vanishing points can be captured by a front camera is hard to find in our daily environment. This paper proposes a camera pose estimation method. It collects multiple images of lane markings while changing the horizontal angle with respect to the markings. One vanishing point, the cross point of the left and right lane marking, is detected in each image, and vanishing line is estimated based on the detected vanishing points. Finally, camera pose is estimated from the vanishing line. The proposed method is based on the fact that planar motion does not change the vanishing line of the plane and the normal vector of the plane can be estimated by the vanishing line. Experiments with large and small tilt and roll angle show that the proposed method outputs accurate estimation results respectively. It is verified by checking the lane markings are up right in the bird's eye view image when the pan angle is compensated.

• The Journal of Korean Physical Therapy
• /
• v.16 no.4
• /
• pp.23-37
• /
• 2004

Fibromyalgia syndrome(FMS) is a chronic pain disorder of unknown etiology characterized by widespread musculoskeletal aches and pains, stiffness, and general fatigue, disturbed sleep and sleepiness. Frequently misdiagnosed, FMS is often confused with myofascial pain syndrome, polymyalgia rheumatica, polymyositis, hypothyroidism, metastatic carcinoma, rheumatoid arthritis (RA), juvenile rheumatoid arthritis, chronic fatigue syndrome, or systemic lupus erythematosus, any of which may occur concomitantly with FMS. The management of FMS often begins with a thorough examination and a diagnosis from a physician who is formally trained in tender-point/trigger-point recognition. An initial diagnosis provides reassurance to the patient and often reduces the anxiety and depression patterns associated with FMS. The most common goals in the management of FMS are (1) to break the pain cycle, (2) to restore sleep patterns, and (3) to increase functional activity levels. Because FMS is a multifactorial syndrome, it is likely that the best treatment will encompass multiple strategies. Medication with analgesics and antidepressants and also physiotherapy, are often prescribed and give some relief. The other most effective intervention for long-term management of FS to date is physical exercise. Physical therapists can instruct patients in the use of heat at home (moist hot packs, heating pads, whirlpools, warm showers or baths, and hot pads) to increase local blood flow and to decrease muscle spasm and tension. Also instruct patients in the proper use of cold modalities (ice packs, ice massage, and cool baths) to anesthetize localized areas of pain (tender points) and break the pain cycle. Massage and tender-point massage also may promote muscle relaxation. To date, the two most important interventions for the long-term management of FS are patient education and physical exercise. Lately, is handling FMS and Chronic Fatigue syndrome(CFS) together, becuase FMS and CFS are poorly understood disorders that share similar demographic and clinical characteristics. Because of the clinical similarities between both disorders it was suggested that they share a common pathophysiological mechanism, namely, central nervous system dysfunction.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.460-470
• /
• 2020

In modern life, interior decoration has been transformed into a psychological synergistic effect of space, greatly affecting human sensibility. The main point of view in this paper is to study the discovery of new decorative effects and the possibility of products that can replace imported tiles, which account for more than 60% of the walls of indoor spaces closely related to daily life. The solution is to create point tiles using color glass plaster techniques developed in 2018 and to explore the possibility of decorating art walls to meet consumers' purchasing needs using simulations. The four patterns applied to the a paintbrush, resist printing, cutting technique, and inlaid patterns, and the traditional color development effect of the medium color suited to our sensibilities was studied. In addition, through simulation, art walls and acrylic using color glass styles were also used in the kitchen, living room and empty space of the bathroom. Based on this research, ceramic point tiles with a new perspective will be explored and the interior using walls will be activated.

• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.83-101
• /
• 2022

Accurate atmospheric correction is essential for the analysis of land surface and environmental monitoring. Aerosol optical depth (AOD) information is particularly important in atmospheric correction because the radiation attenuation by Mie scattering makes the differences between the radiation calculated at the satellite sensor and the radiation measured at the land surface. Thus, it is necessary to use high-quality AOD data for an appropriate atmospheric correction of high-resolution satellite images. In this study, we examined the Second Simulation of a Satellite Signal in the Solar Spectrum (6S)-based atmospheric correction results for the Sentinel-2 images in South Korea using raster AOD (MODIS) and single-point AOD (AERONET). The 6S result was overall agreed with the Sentinel-2 level 2 data. Moreover, using raster AOD showed better performance than using single-point AOD. The atmospheric correction using the single-point AOD yielded some inappropriate values for forest and water pixels, where as the atmospheric correction using raster AOD produced stable and natural patterns in accordance with the land cover map. Also, the Sentinel-2 normalized difference vegetation index (NDVI) after the 6S correction had similar patterns to the up scaled drone NDVI, although Sentinel-2 NDVI had relatively low values. Also, the spatial distribution of both images seemed very similar for growing and harvest seasons. Future work will be necessary to make efforts for the gap-filling of AOD data and an accurate bi-directional reflectance distribution function (BRDF) model for high-resolution atmospheric correction. These methods can help improve the land surface monitoring using the future Compact Advanced Satellite 500 in South Korea.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.659-668
• /
• 1998

The purpose of this study was to evaluate the possibility of the decrease of bond strength due to increased thickness of resin base in indirect bracket bonding technique. Metal brackets were bonded to the resin blocks involving bovine lower incisors and the thickness of resin bases was increased by increments of 0.5 mm from 0.0 mm to 2.0 mm. They were divided into two groups, one group is that the thickness of resin base was increased but the loading point from the tooth surface was maintained constantly, the other group is that the loading point from the tooth surface and the resin base thickness were increased concomitantly. The shear bond strength was tested on universal testing machine and the failure patterns were assessed with the adhesive remnant index(ARI). The results were as follows: 1. When the distance from the tooth surface to the loading point was maintained constantly, shear bond strength was increased significantly according to the decrease of distance from the bracket base to the loading point and the increase of resin base thickness. 2. When the distance from the tooth surface to the loading point and the resin base thickness were increased concomitantly, shear bond strength was decreased according to the increase of resin base thickness but significant differences were ignorable. 3. There were no significant differences in ARI scores according to the change in the thickness of resin base. The results of the present study indicated that shear bond strength was not much affected by the thickness of resin base, whereas was decreased according to the increase of distance from bracket base to the loading point.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.445-452
• /
• 2018

In this paper the effects of particle size and model scale of concrete have been investigated on point load index, tensile strength, and the failure processes using a PFC2D numerical modeling study. Circular and semi-circular specimens of concrete were numerically modeled using the same particle size, 0.27 mm, but with different model diameters of 75 mm, 54 mm, 25 mm, and 12.5 mm. In addition, circular and semi-circular models with the diameter of 27 mm and particle sizes of 0.27 mm, 0.47 mm, 0.67 mm, 0.87 mm, 1.07 mm, and 1.27 mm were simulated to determine whether they can match the experimental observations from point load and Brazilian tests. The numerical modeling results show that the failure patterns are influenced by the model scale and particle size, as expected. Both Is(50) and Brazilian tensile strength values increased as the model diameter and particle sizes increased. The ratio of Brazilian tensile strength to Is(50) showed a reduction as the particle size increased but did not change with the increase in the model scale.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.841-849
• /
• 2001

The pixel information of the object was obtained sequentially and pixels were clustered to a label by the line labeling method. Feature points were determined by finding the slope for edge pixels after selecting the fixed number of edge pixels. The slope was estimated by the least square method to reduce the detection error. Once a matching point was determined by comparing the feature information of the object and the pattern, the parameters for translation, scaling and rotation were obtained by selecting the longer line of the two which passed through the matching point from left and right sides. Finally, modified Hausdorff Distance has been used to identify the similarity between the object and the given pattern. The multi-label method was developed for recognizing the patterns with more than one label, which performs the modified Hausdorff Distance twice. Experiments have been performed to verify the performance of the proposed algorithm and method for simple target image, complex target image, simple pattern, and complex pattern as well as the partially hidden object. It was proved via experiments that the proposed image matching algorithm for recognizing the object had a good performance of matching.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.31-34
• /
• 2000

This paper proposes a reconstruction scheme for overlapping characters in Thai printed document. Overlapping characters are characters that overlap with surrounding characters. The problem of overlapping characters is still an unsolved problem In commercially available software of Thai character recognition systems. The algorithm of reconstruction scheme is based on structural analysis of overlapping Thai printed characters. It consists of 2 steps: overlapping point determination and reconstruction of segmented characters. The overlapping point is defined as the intersection point between characters and can be determined by using templates. Then, an overlapping character is separated into segments at the intersection point. The structure of each segment may be an incomplete character and is not identical to the original one. Therefore, the reconstruction process is employed to add the incomplete part of these segments. The proposed scheme has been implemented and tested with 70 patterns of conventionally found in overlapping printed Thai characters with different typefaces and type sizes. The experimental results show that the proposed scheme can segment and reconstruct overlapping characters correctly. The proposed scheme can improve the recognition rate of commercially available software, ThaiOCR1.5 and ArnThai1.0, more than 60 percents

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.950-962
• /
• 2013

The purpose of this study was to develop the slim-fit dress shirt pattern. Among the published educational patterns, there were four patterns based on similar design and silhouette with slim-fit dress shirts. Then, the drafting method of those patternsBB were compared and analyzed. The subjects for wearing evaluation were three 20 to 39 aged average-sized men. After the wearing evaluation(5 Likert point scale), N pattern had been chosen as the final comparison pattern because it received the highest points. The slim-fit shirt pattern was developed based on the result of wearing evaluation. The foundation design were as following: shirt length (Stature/2-12), back length (Stature/4), armhole depth (Chest/4+1), width (Chest/4+3), Interscye; Back (Chest/6+5), Interscye; Front (Chest/6+4), width of the nape of neck (Neck/6+1=◎), height of the nape of neck (◎/3), of the front neck (◎-0.5), depth of the front neck(◎+1.5). After the wearing evaluation about researched pattern and N pattern, researched patternsBB scale points were bigger than N pattern and there were slight differences. The scale points for N patternsBB movement evaluation showed highest points on all contents. Therefore, the researched pattern is suitable for the original form of slim-fit dress shirt. The new dress shirt pattern reflected the slim-fit trend in the research expected to help educational environment and industrial site.