• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.915-922
• /
• 1991

This research paper presents an ALU unit using 1.0$\mu$m CMOS technology capable of doing IEEE standard single and double precision floating poing calculation within 32ns (2 clock) at 60 MHz clock speed. This 32ns speed was achieved by using 9ns 1's complement arithmetic 54 bit carry select adder instead of previous 2's complement adders. On the first cycle, this adder is used for addition or subtraction and the second cycle uses this adder for rounding. This reduces the number of required adders from two to one. Speed improvement is 2 to 5 times compared with previous 40MHz design. Design goal was 60MHz, however, this unit is functioning at 80 MHz at room temperature.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.36-41
• /
• 1974

Two realigation procedures of any open-circuit transfer functions are presented through the use of genera1ized immitance converters composed of two operational amplifiers and passive elements. The fast precedure is to select the admittance conversion, h(s), to be k/s , and the second one to be k/s. The merit of the second procedure is the elimination of capacitors in passive networks, however, requires more CGIC's than the first. The second-order transfer function is realiged in the two methods under discussion to find that the sensitivity of Q factor and the undamped oscillation frequency to the variation of circuit elements. The first procedure proved to be favorable from the view point of sensitivities.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.907-910
• /
• 2003

We have developed Logic Design Training Kit for studying, actual training, designing of FPGA(Xillinx) or CPLD(ALTERA CPLD), the Digital Logic Device. This training kit has 12 matrix keys, RS232 port for serial communication and uses LED array. six FND(Dynamic), LCD as display part. That is standard specification for digital logic training kit. Special point of this kit is that we make two logic device trainig kit. This two logic device kit have more smaller and simple architecture because only uses one chip. That chip already includes a lot of functions that need for training kit, such as : complex logic circuit needed the two kind of logic devices, 16 way of system clock deviding function, serial communication interrupt....etc. We called that one chip is Center Bridge Chipset ; Xillinx FPGA Spartan2. User can select between using one device of FPGA or CPLD, or uses both them. Because of, Center Bridge Chipset has profitable architecture. it can work as Logic Device's networking with Master-Slave connection When using both logic devices.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1707-1714
• /
• 2006

In order to enhance sustainable war fighting capabilities, it is important to maintain a good ammunition support system. In this paper, we evaluate the performance of Ammunition companies using Imprecise Data Envelopment Analysis (IDEA)-BCC and IDEA-Additive model, which can deal with imprecise data in DEA. In order to select a list of input and output variables, we used a multiple regression analysis. We could choose input variables that have significant effects on the output performance with stepwise regression model. From the regression analysis, the number of soldiers, officers, and ammunition warehouses were selected as the input variables. Seven out of sixteen Ammunition companies were found to be inefficient by the IDEA-BCC model. And using IDEA-Additive model, we could identify the input excess and the output shortfall in reaching at a point on the efficiency frontier.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.691-697
• /
• 2006

Metamodel, model of model, has been widely used to improve an efficiency of optimization process in engineering fields. However, global metamodels of constraints in a constrained optimization problem are required good accuracy around neighborhood of optimum point. To satisfy this requirement, more sampling points must be located around the boundary and inside of feasible region. Therefore, a new sampling strategy that is capable of identifying feasible domain should be applied to select sampling points for metamodels of constraints. In this research, we suggeste sequential feasible domain sampling that can locate sampling points likely within feasible domain by using penalty function method. To validate the excellence of feasible domain sampling, we compare the optimum results from the proposed method with those form conventional global space-filling sampling for a variety of optimization problems. The advantages of the feasible domain sampling are discussed further.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.3
• /
• pp.25-31
• /
• 2018

In this paper, we consider the game theoretic approach to investigate the transmit power optimization problem where D2D users share the uplink of the cellular system. Especially, we formulate the transmit power optimization problem as a non cooperative power control game. In the user wide sense, each user may try to select its transmit power level so as to maximize its utility in a selfish way. In the system wide, the transmit power levels of all users eventually converge to the unique point, called Nash Equilibrium. We first formulate the transmit power optimization problem as a non cooperative power control game. Next, we examine the existence of Nash Equilibrium. Finally, we present the numerical example that shows the convergence to the unique transmit power level.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.670-673
• /
• 1987

The structure of chemical process has become increasingly complex, due to better management of energy and raw materials. As a consequence, the design of control systems for complete plants now constitutes the focal point of engineering interest, rather than controller designs for single processing units. Instead of traditional methods based on complex mathematical model, chemical processes are represented by structural array and cause-and-effect graph to apply non-numerical problem-solving techniques. A systematic logical procedure to synthesize alternatives of control system structure and some heuristic rules to select a feasible solution from the vast number of alternatives that are possible are considered in this study.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.207-213
• /
• 2006

Mobility Anchor points are used for the mobility management in HMIPv6 networks. Currently a mobile node selects the MAP farthest away from itself as a new MAP among available candidates when it undertakes a macro hand off. With this technique, however, the traffic tends to be concentrated at a MAP with the largest domain size and the communication cost increases due to the distance between the mobile node and the MAP. In this work, we propose a novel scheme to select a MAP to minimize the communication cost, taking the mobile node's moving speed and data rate into account. To come up with the scheme we analyses the communication analyses the communication cost into the binding update cost and the data packet delivery cost, and derive an equation representing the optimal MAP domain size to minimize the total cost.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.773-782
• /
• 2008

This paper describes the method for proper location of protective equipment in underground distribution cable through field test and analysis at testing lines. To prove the reliability for analysis simulated by EMTP/ATPDraw, the testing results obtained by the real test and the analysis for the same test lines were compared each other. The accuracy of analysis was proved by the comparison. Over voltages were measured and analyzed at each point of cable and switches in case of which lightning surge current was applied. The analysing method was applied to real distribution systems to select the proper location of protective equipment. It is evaluated that the location of protective equipment was properly selected.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 1999.04a
• /
• pp.126-132
• /
• 1999

The purpose of this study is to advance apartment houses in quality as a residence through revitalization of tradition and the procedures are as follows: The first procedure is theoretical contemplation. The second procedure is analysis of the traditional residential space that gives a starting point of introspection of it without cease at the stage of formal following or pattern application in revitalizing tradition in the apartment houses. And the third procedure is to select and suggest aspects applicable to developing Korean style apartment houses. The suggest is embodied by a plane figure of 55 pyong type apartment house after selecting the concrete development aspects with approaches such as arrangement and interior space analysis, behavior analysis and space division and design analysis. This study has its meaning in that it suggests a possibility of various approaches other than formal following or pattern application in revitalizing tradition in a new Korean type apartment house, that it gives another selection to diversifying consumers' patterns and that it helps recognize and develop our tradition in this age of cultural nationalism.