• 한국식생활문화학회지
• /
• 제19권3호
• /
• pp.336-347
• /
• 2004

This study was conducted to investigate eating-out behavior patterns of youths, especially junior high and senior high school students. 1600 questionnaire surveys were distributed and 1487 were used for analysis. In order to consider regional differences as well as overall characteristics of youths' eating-out behaviors, the subjects were evenly sampled from north Seoul, south Seoul, big cities, middle/small cities and small towns. As for the frequency of eating-out, 62.7% of respondents answered once to twice per week. For the can of more than 5 times of eating-out per week, the respondents from south Seoul showed the highest frequency. For the case of no eating-out, the highest frequency was shown from the small towns. As for the most frequently visited place for eating-out, 33.6% of respondents answered Korean style restaurants, and 17.6% Boon-sik(Sanck-bar). Regarding the preference of Korean style restaurants, the highest rate was shown from the residents of big cities. For the question of when they eat out, 89.6% answered dinner and 6.3% lunch. For the question about reason of choosing particular restaurants, 61.5% of respondents referred to tastes and 16.6% price. For the question of the most important reason of eating out, 52.6% point out 'meal solution' and 25.6% 'for meeting.' As for the people accompanied when eating out, 67.2% of the respondents answered family. For the cost of eating out per person, 45.7% of the respondents spent 2000-4000 won for lunch; 31.1% spent 5000-10,000 won for dinner; 33.7% of the respondents spent more than 20,000 won for the special events. Regarding the regional differences of eating-out cost, respondents from south Seoul tended to spend the biggest amount of money for lunch, dinner and special day.

• The Korean Journal of Ecology
• /
• 제26권5호
• /
• pp.255-261
• /
• 2003

To analyze ecological characteristics of the Ulmus pumila community, an on-the-spot survey was conducted in August, 1998 in the Dong River, Gangwon-do, South Korea. The Ulmus pumila community is partially distributed in Dong River's midstream and upper stream. Topographical characteristics of this community are significant in the point bar or sandbank of the river. The community is classified into two types, disturbed and non-disturbed types, by the effect of flooding. The Ulmus pumila community (bush forests of Siberian elms) is a representative community which forms riparian forests, but its distribution is rare in South Korea. Only in Dong River is the Ulmus pumila distributed enough to form a community, and none is known that is lager than this community in South Korea. The non-disturbance type progresses more homogeneously than the disturbance type because it is formed on riverside banks where it is affected less by flooding. We concluded that the Ulmus pumila community in this study area has characteristics of riparian forests. In South Korea, Ulmus pumila community can be regarded as important element of vegetation landscape constituting riparian forests. Specifically, these riparian forests are evaluated as high in conservation value due to their being formed spontaneously. Moreover, Dong River is regarded as the southern limit of Ulmus pumila, which has a northern origin. The species or community needs continuous interests and conservation countermeasures because there are limitations in its spread of distribution by natural or artificial efforts.

• 한국건축시공학회지
• /
• 제19권6호
• /
• pp.495-501
• /
• 2019

최근 철근의 대체재로서 인장강도나 내부식성이 좋은 CFRP(carbon fiber reinforced polymer)를 이용한 연구가 활발히 진행되고 있다. 그러나 현재 피로 파괴에 대한 연구는 미비한 상태이다. 따라서 본 연구에서는 CFRP보강 콘크리트 보를 제작하여 정적 및 반복 하중에 따른 역학적 거동과 파괴형태를 분석하고 철근의 대체 재료로서 CFRP 보강근 사용에 대한 안전성과 타당성을 평가하도록 하였다. 반복하중의 범위는 극한하중의 10~70%를 취하고 3점 재하방식으로 sine파를 이용한 3Hz의 속도로 재하 하였다. 정적 실험결과 보강량의 증가에 따라 보의 최대하중이나 강성은 현저하게 증가하였지만 피로 실험결과 보강량의 증가에 따라 반복 횟수는 감소하고 처짐량은 증가하여 안전성은 다소 감소됨을 알 수 있었다.

• 공업화학
• /
• 제19권1호
• /
• pp.133-136
• /
• 2008

온실 가스 가운데 하나인 이산화탄소를 줄이기 위한 연구의 일환으로 이산화탄소와 산화 스틸렌을 원료로 하고 zinc glutarate를 촉매로 하여 poly(styrene carbonate)를 합성하였다. 여러 가지 분광학적인(FT-IR, $^1H$-NMR, $^{13}C$-NMR, GC-MS) 분석결과 교대 공중합체임이 확인되었으며, MALDI법에 의하여 분자량($\bar{M}_n$)은 $5.0{\times}10^4$이며, 유리전이온도는 $88^{\circ}C$이고, 융융점은 $240^{\circ}C$로 밝혀졌다. 이 고분자를 열분해하면 고리형 카보네이트인 styrene carbonate가 생성되는 것도 확인하였다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.164-164
• /
• 2008

The beach-chair traction position is designed to allow the use of traction while allowing the surgeon to orient the shoulder in an upright position and convert to an open procedure, if necessary. The patient is placed in the beach-chair position under general anesthesia. A three-point shoulder holder (Arthrex, Naples, Florida) is attached to the rail of the operating table on the same side as the surgeon, whereas it is placed on the side opposite the surgeon in the lateral decubitus position. A shoulder traction and rotation sleeve (Arthrex) are affixed to the arm following the manufacturer's instructions. Positioning the thumb toward the closed side of the sleeve ensures a field for the anterior portion of the rotator cuff and prevents the tendency of the suspension apparatus to place the arm in internal rotation. The arm is maintained in 30 to 40 degree abduction and 30 to 40 degree flexion by controlling the length and height of the bar and the location of the universal clamp. The universal clamp allows multiple planes of adjustment to control abduction and forward movement of the arm. The sleeve is attached to the longitudinal traction cable using a sterile hook, and a lateral strap is secured around the proximal portion of the sleeve to the overhead traction cable to ensure a field for glenohumeral reconstruction. The use of a lateral strap permits ideal shoulder positioning for improved access to the anterior and inferior glenohumeral joint. The lateral strap can be released or removed to widen the subacromial space during subacromial decompression or rotator cuff repair. A 10-lb weight is attached to the longitudinal traction cable for an average-sized person.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.34-40
• /
• 1985

The characteristics of Paulownia coreana wood used for sounding boards has been revealed through this study. The 80 specimens were selected from Paulownia coreana wood. The dynamic Young's modulus, the internal friction and resonant frequency of wood were measured by the method of making a rectangular bar resonate in the audio frequency range. The results obtained are summarized as follows: 1. The average values of the specific gravity, the dynamic Young's modulus and the internal friction concerning Paulownia coreana used for sounding boards are $0.252{\pm}0.022$, $(0.494{\pm}0.068){\times}10^{11}$ dyne/cm and $(7.89{\pm}1.692){\times}10^{-3}$ respectively. 2. The average values of resonant frequency, the velosity of sound, and K values are $504{\pm}24.298$ Hz, $5018{\pm}219.83$m/s, and $(9.907{\pm}2.05){\times}10^{-4}$ respectively. 3. The dynamic Young's modulus of Paulownia coreana increases with the increase of the specific gravity, and that on the contrary the internal friction decreases. 4. The dynamic Young's modulus was abruptly decreased as the moisture content of wood specimens was increased up to the fiber saturation point, and the internal friction was linearly increased as the moisture content of wood specimens were increased. 5. The vibration properties of Paulownia coreana are that the dynamic Young's modulus is fairly high, the internal friction is low, and the ratio of Young's modulus to specific gravity shows large value.

• Journal of Ecology and Environment
• /
• 제44권3호
• /
• pp.162-177
• /
• 2020

Background: Ecologists have achieved much progress in the study of mechanisms that maintain species coexistence and diversity. In this paper, we reviewed a wide range of past research related to these topics, focusing on five theoretical bodies: (1) coexistence by niche differentiation, (2) coexistence without niche differentiation, (3) coexistence along environmental stress gradients, (4) coexistence under non-equilibrium versus equilibrium conditions, and (5) modern perspectives. Results: From the review, we identified that there are few models that can be generally and confidently applicable to different ecological systems. This problem arises mainly because most theories have not been substantiated by enough empirical research based on field data to test various coexistence hypotheses at different spatial scales. We also found that little is still known about the mechanisms of species coexistence under harsh environmental conditions. This is because most previous models treat disturbance as a key factor shaping community structure, but they do not explicitly deal with stressful systems with non-lethal conditions. We evaluated the mainstream ideas of niche differentiation and stochasticity for the coexistence of plant species across salt marsh creeks in southwestern Denmark. The results showed that diversity indices, such as Shannon-Wiener diversity, richness, and evenness, decreased with increasing surface elevation and increased with increasing niche overlap and niche breadth. The two niche parameters linearly decreased with increasing elevation. These findings imply a substantial influence of an equalizing mechanism that reduces differences in relative fitness among species in the highly stressful environments of the marsh. We propose that species evenness increases under very harsh conditions if the associated stress is not lethal. Finally, we present a conceptual model of patterns related to the level of environmental stress and niche characteristics along a microhabitat gradient (i.e., surface elevation). Conclusions: The ecology of stressful systems with non-lethal conditions will be increasingly important as ongoing global-scale climate change extends the period of chronic stresses that are not necessarily fatal to inhabiting plants. We recommend that more ecologists continue this line of research.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.831-849
• /
• 2015

Seismic-design procedures for walls require that the confinement in the critical (plastic hinge) regions should extend over a length in the compression zone of the cross section at the wall base where concrete strains in the Ultimate Limit State (ULS) exceed the limit of 0.0035. In a performance-based framework, confinement is linked to required curvature ductility so that the drift demand at the performance point of the structure for the design earthquake may be met. However, performance of flexural walls in the recent earthquakes in Chile (2010) and Christchurch (2011) indicates that the actual compression strains in the critical regions of many structural walls were higher than estimated, being responsible for several of the reported failures by toe crushing. In this study, the method of estimating the confined region and magnitude of compression strain demands in slender walls are revisited. The objective is to account for a newly identified kinematic interaction between the normal strains that arise in the compression zone, and the lumped rotations that occur at the other end of the wall base due to penetration of bar tension yielding into the supporting anchorage. Design charts estimating the amount of yield penetration in terms of the resulting lumped rotation at the wall base are used to quantify the increased demands for compression strain in the critical section. The estimated strain increase may exceed by more than 30% the base value estimated from the existing design expressions, which explains the frequently reported occurrence of toe crushing even in well confined slender walls under high drift demands. Example cases are included in the presentation to illustrate the behavioral parametric trends and implications in seismic design of walls.

• 한국터널지하공간학회 논문집
• /
• 제18권2호
• /
• pp.165-173
• /
• 2016

본 논문은 격자지보재의 규격자재와 비규격자재의 성능평가에 대한 내용을 다루었다. 격자보재는 강봉으로 제작된 아치형의 터널지보공을 말하며 터널 굴착시 지반의 변형을 최대로 억제하여 터널의 안정성을 확보하기 위하여 사용되어지는 지보재이다. 이런 격자지보재의 성능평가는 휨강도시험과 인장강도시험을 통해 평가할 수 있으며 터널표준시방서에서는 항복강도 500MPa 이상인 용접용 강재를 사용도록 규정하고 있다. 그러나 저품질의 강재가 사용될 경우 현장에서 규격자재와 비규격자재를 육안으로 구분하기 어렵게 되었다. 따라서 본 논문에서는 격자지보재의 규격자재와 비규격자재에 대한 성능평가를 실시하여 비규격자재의 항복강도 저하의 문제점을 분석하였다.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.235-248
• /
• 1994

There were many studies that distribute the partial edentulous states and examine the removable partial denture designs in the planning of removable partial denture treatment. This study was performed in the point of removable partial denture prescription to evaluate partial edentulism and its removable partial denture designs. The data was collected from the dental laboratory of each three dental colleges in Seoul and from two dental laboratories only for removable partial dentures as a prescription form. A total of 1411 cases with prescription form collected from dental laboratories were distributed for this study, then 788 cases were selected for this study. The case selection was done according to the contents of prescription form. The selected cases were divided into maxillary arch and mandibular and classified in terms of types of major connector and direct retainer, unbroken anterior teeth, Kennedy classification, the number of remaining teeth, and distribution of age and sex. The analyzed results were as follows : 1. The Kennedy classification I showed highest frequency both in maxilla and mandible. 2. The arch distribution of removable partial denture was 50.08% for maxilla and 49.92% for mandible. 3. The highest frequency in the distribution of direct retainer was the RPA clasp design. 4. The frequency of unbroken anterior 6 was 73.36% for maxilla and 82.30% for mandible. 5. The design of broad palatal strap and lingual bar revealed the highest prevalence in the major connector construction. 6. The mean number of remaining teeth per arch was 8.25 for maxilla and 8.37 for mandible. 7. The mean age of the patients supplied with removable partial denture was 52.25 years for men, 51.68 years for women, 52.11 years for maxilla, and 51.76 years for mandible and women showed more prevalence.