• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.83-96
• /
• 2003

Effect of Nutrient Concentrations, fertigation frequency, and learching percentage on crop growth and nutrient concentrations in root media were evaluated. The treatment of each irrigation with $50 mg.L^{-1}$ of nitrogen in stage 2 and increase to $80 mg.L^{-1}$ nitrogen in stage 3 had the highest crop growth at 34 days after sowing among treatments tested. Feeding with low nutrient concentrations and elevated frequency decreased crop growth. In treatments of each leaching percentage, feeding with low nutrient concentrations and elevated frequency resulted in increased tissue nutrient contents. The less tissue potassium content and higher calcium and magnesium contents were observed in treatment of 50% leach than those in 0% leach. All treatment tested had soil solution pH higher than 6.8. Electrical conductivity in treatments of 50% leach were lower than those of 0% leach. Feeding with low nutrient concentrations and elevated feeding frequency in each leaching percentage resulted in increased electrical conductivity in soil solution of root media. Trends of medium nutrient concentrations were similar to those of electrical conductivity.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.4
• /
• pp.185-192
• /
• 2019

In this study, we, through case studies, formulated a method to implement net-zero energy daycare center at the current insulation and technology level, and calculated its energy expense. The reference model was a medium sized daycare center whose number of children was 99. We analyzed the energy consumption status for the reference model and developed TRNSYS simulation analytical model to realize net-zero energy . We assumed the reference model to be "All Electric Building" where all energy including cooking is supplied by electricity. The result is summarized as follows: First, the annual electricity consumption of daycare center was 53,291kWh. Plug load occupied the largest share of 48% followed by lighting, 10%, cooling, 9%, cooking, 9%, heating, 8%, hot water, 5% and ventilation, 2%. Second, the photovoltaic installation capacity to realize net-zero energy was 40.32kWp and its annual generation was 53,402kWh. Third, the annual energy expense(electricity bill) by realizing net-zero energy was 2,620,390won.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.285-293
• /
• 2018

This study aimed to evaluate the effect of height suppression of cucumber and tomato plug seedlings as affected by mechanical stimulus using brushing as environment-friendly method. Cucumber (Cucumis sativus L. 'Joeunbaekdadagi') and tomato (Solanum lycopersicum L. 'Mini Chal') seeds were sown in 40-cell plug trays ($54{\times}27.5{\times}5cm$) filled with growing medium on Oct. 9, 2017. The cultivation environment in a venlo-type glasshouse was maintained as cultivation temperature range of $15-25^{\circ}C$ and the relative humidity of $50{\pm}10%$. Nontreatment and diniconazole ($7.5mg{\cdot}L^{-1}$) application at 15 days after sowing were used as the control. In addition, brushing treatments in cucumber and tomato were applied interval of 2, 4 or 6 hrs for 15 and 20 days, respectively. Plant height, hypocotyl length, and internode length were inhibited for cucumber and tomato in the diniconazole treatment than in the control. The leaf size was reduced, both cucumber and tomato, while the SPAD increased under the diniconazole treatment. However, stem diameter of cucumber was the thickest in the 2 hrs brushing interval treatment. Fresh weights of shoot and root were the significantly lowest in the diniconazole treatment. Application of brushing improved seedlings quality by promoting dry weights of shoot and root, and compactness of tomato seedlings. The chlorophyll fluorescence of tomato seedlings drastically decreased with 2 hrs treatment, indicating that mechanical stress by brushing treatment. The relative growth rate of tomato seedlings was significantly lower in the diniconazole treatment, but cucumber seedlings were not significantly different in all treatments. As a results, height suppression of cucumber and tomato seedlings was best achievement in the diniconazole treatment by the chemical as growth regulator. In an environment-friendly point of view, however, it is considered that 2 hrs brushing interval treatment can be the applicability for replacing the chemical methods in plug seedling growth of cucumber and tomato.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.112-117
• /
• 2008

Plug seedlings of vinca (Catharanthus roseus L. 'Pacifica Punch') and salvia (Salvia splendens F. Sellow ex Roem & Schult 'Maestro') were transplanted into square plastic pots (145 mL volume) filled with a soilless growing medium. To determine the effect of application rate on the growing medium EC and growth of plants, 0, 0.5, 1.0, 1.5, 2.0 and 4.0 g per pot of a controlled release fertilizer (14-14-14 Osmocote, 14N-6.2P-11.6K) were mixed with the growing medium. Plants were subirrigated daily with tap water. In both vinca and salvia, growing medium EC increased as application rate was elevated. Growing medium EC was relatively constant over a whole crop period when the application rate was less than 1.5 g per pot, while it decreased throughout the experiment at higher application rates such as 2.0 to 4.0g per pot in both species. The greatest leaf area, plant height, and shoot dry weight of vinca were obtained when plants were fertilized with 2.0 to 4.0 g per pot of the fertilizer, resulting in a growing medium EC of $1.0{\sim}1.7dS{\cdot}m^{-1}$ throughout the experiment. Leaf area, shoot dry weight, and chlorophyll content of salvia increased with elevated application rates. Leaf area, shoot dry weight, and chlorophyll content of salvia were the greatest when plants were fertilized with 4.0 g per pot, resulting in growing medium EC of $1.0{\sim}4.0dS{\cdot}m^{-1}$ throughout the experiment. Plant height of salvia was the greatest when plants were fertilized with 2.0 to 4.0g per pot. Concentrations of nitrogen (N), phosphorus (P), potassium (K), magnesium (Mg), and sulfur (S) in the shoots of vinca increased, while concentration of calcium (Ca) decreased with elevated application rates. Concentrations of boron (B) and manganese (Mn) in the shoots of vinca increased as the application rate decreased.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.483-487
• /
• 2001

This study was carried out to investigate the role of attached leaflet on rooting and growth by one nodal cutting in tomato. As cutting sources 4 to 6 nodes could be obtained from one nursery seedling. Medium for cutting was a mixture with perlite plus peat moss (1 : 1, v/v), and each plug capacity was 30mL in the 72 cells-plug tray. Plant height and the number of leaves were significantly increased by attached leaflet cutting in 'Pepe' and 'Coco' cherry tomato. Dry weights of top and root were increased as much as 3 to 15 times in the cutting attached leaflet. Rooting percentage was 93.5% in one node cutting and 86% in the cutting with hypocotyl node part. At 20 to 24 days after nodal cutting, healthy nursery plant could be produced to transplant in field. The nursery plants by nodal cutting (NPNC) showed more fibrous roots and less tap roots than that of seedling. In terms of rooting pattern, NPNC rooted at the whole ground stem part, while rooting of seedling occurred at basal part of hypocotyl.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2019

This study was conducted to determine the effects of a pre-planting fertilizers with various $NH_4{^+}:NO_3{^-}$ ratios in a coir dust:peatmoss:perlite (3.5:3.5:3.0, v/v/v) medium on the growth of hot pepper (Capsicum annuum L. cv. Nokkwang) plug seedling. Nitrogen levels were fixed to $300mg{\cdot}L^{-1}$ and the $NH_4{^+}:NO_3{^-}$ ratios were varied to 0:100, 27:73, 50:50, 73:27, and 100:0. The 50-cell trays were filled with treatment media containing pre-plant fertilizers, then seeds were sown. After seeds were germinated, the trays were moved to greenhouse and seedlings were feed with 13-2-13 and 20-9-20 fertilizers, alternatively. The changes in pH and EC were measured every week and soil solution for nutrient concentrations were analyzed in week 0, 3, and 7. The measurements of seedling growths as well as analysis of tissue nutrient contents were also conducted in week 7. The varied $NH_4{^+}:NO_3{^-}$ ratios did not influence on the pHs of root media after incorporation of pre-planting fertilizers, but the ECs were heightened as proportion of $NH_4{^+}$ to $NO_3{^-}$ were elevated. During the raising of seedlings, the pHs rose over time in the treatments of 0:100 and 27:73 ($NH_4{^+}:NO_3{^-}$). The concentrations of all macro-elements in root media decreased gradually as seedlings grew in all treatments. The seedling growths 7 weeks after seed sowing were the highest in the treatments of 27:73 and 50:50 ($NH_4{^+}:NO_3{^-}$) and those became worse in the treatments of higher $NH_4{^+}$ ratios than 73%. In terms of inorganic element contents based on the dry weight of above ground tissue, the treatment of 0:100 showed the lowest content of Ca, Mg, Na, Cu, Mn, and Zn. Based on the results, it is desired that $NH_4{^+}$ ratio in pre-planting fertilization is maintained to be 50% or less for the raising of hot pepper plug seedlings.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.434-443
• /
• 2011

A large scale seeding system was stable in terms of techniques but a convenient seeding system of small size was unsettled. This study was performed to develop a semi-automatic seeder for small and medium sized scale farm. To investigate optimum needle diameter and vacuum pressure was used vacuum suction needle seeder. Although the needle diameter according to the kinds of seed was different, the needle diameter for salvia and lettuce seed was suitable for 0.34 mm needle nozzle and 0.4 mm taper nozzle. The prototype consisted a seeding frame attached with needle nozzle, seed hopper, vibrating device, seeding part, vacuum ejector, seed tube etc.. As the result with the experiments, the seeding rate of the seeder was 92% and more at 0.34 mm diameter needle nozzle and 0.4 mm taper nozzle. Eccentric weight for seed hopper vibration was suitable that weight is 11 g and eccentric distance is 0.5 mm. Vibration acceleration of upward direction was 0.363 m/$s^2$. Working capacity of the seeder was possible 160 trays per hour. It was possible for sowing small seeds but it was required to make compact and simple model.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.7-7
• /
• 2001

Cryopreservation by vitrification of Hanwoo blastocysts derived from nuclear transfer with Hanwoo adult ear cell was compared with that of in vitro fertilized blastocysts. For vitrification, day 7 or day 8 blastocysts were serially exposed in glycerol (G) or/and ethylene glycol (EG) mixtures (10% G for 5 min, 10% G plus 20% EG for 5 min, and 25% G plus 25% EG for 30 sec) which was diluted in 10% FBS added D-PBS. Thawing of straw was carried out in air for 10 sec and then in water bath of $25^{\circ}C$ for 20 sec. The contents of the straw (0.2 ml) was expelled into a culture dish contained with 0.5M sucrose and 10% FBS(S-DPBS) by cutting the cotton plug and then the recovered embryos were put into fresh 0.25M and 0.125M S-DPBS for 30 sec, respectively, The embryos were transferred into D-PBS with 10% FBS for 5 min. and were cultured in a 10u1 droplet of co-culture environment (cumulus cell monolayer + 10% added CRl medium) for 24 h. In the result, survival rates were 88.9% and 85.4% for nuclear transfer embryos and in vitro fertilized embryos, respectively. After transfer of vitrified-thawed blastocysts produced from nuclear transfer, 4 of 5 total recipients did not return to the subsequent estrus cycle at 30 days. It is concluded that the Hanwoo blastocysts derived from nuclear transfer can be successfully cryopreserved using simple and efficient vitrification method.