• 비파괴검사학회지
• /
• 제34권5호
• /
• pp.369-376
• /
• 2014

항공기 구조물 표면에 발생하는 외부 충격은 크랙과 같은 손상을 발생시킬 수 있으며 이는 차후 큰 결함을 야기하기 때문에 충격과 손상을 탐지하고 위치를 추정하는 것은 구조 안정성 모니터링에 있어 중요한 부분이다. 본 연구에서는 능동, 수동 센싱기법을 조합한 L-형상 압전체 센서 배열을 사용하여 충격과 손상을 탐지할 수 있는 기법을 개발하였다. 수동 센싱기법으로 1개 센서군 당 3개의 센서를 L-형상으로 배치하여 충격 발생 각도를 추정하고 2개의 센서군을 사용하여 충격위치를 탐지하는 방법을 도입하였다. 이 수동 센싱기법을 유도초음파 기반의 능동 센싱기법에 확대 적용하여 동일한 압전소자로 충격 탐지와 더불어 손상을 탐지할 수 있는 방법을 개발하였다. 이 기법은 방향에 따른 파동의 속도 변화와 같은 구조물에 대한 정보 없이도 위치 추정이 가능하여 비등방성 구조 내에서도 정확한 충격 및 손상 위치 정보를 얻을 수 있다. 개발된 기법을 날개 형태 구조물 및 CFRP 판에 적용하여 실험적으로 정확한 충격 및 손상 위치를 추정할 수 있음을 증명하였다.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.793-808
• /
• 2018

In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.291-301
• /
• 2012

A scalar metric for the assessment of hull surface producibility was known to be useful in estimating the complexity of a hull form of ships or large offshore structures by looking at their shape. However, it could not serve as a comprehensive measuring tool due to its lack of important components of the hull form such as longitudinals, stiffeners, and web frames attached to the hull surface. To have a complete metric for cost estimation, these structural members must be included. In this paper, major inner structural members are considered by measuring the complexity of their geometric shape. The final scalar metric thus consists of the classes containing inner members with various curvature magnitudes as well as the classes containing curved plates with single and double curvature distribution. Those two distinct metrics are merged into a complete scalar metric that accounts for the total cost estimation of complex structural bodies.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.15-18
• /
• 2008

대공간 구조는 3차원적인 힘의 흐름과 면내력에 의해 외부하중에 대한 저항능력을 확보하는 형태 저항형 구조로서, 구조물 자체의 곡률을 이용하여 면외방향으로 작용하는 외력을 주로 면내력으로 저항할 수 있게한 구조시스템이다. 그러므로, 연성구조물의 일종인 막구조물은 대공간 구조물을 보다 효과적으로 구축할 수 있다. 이러한 막구조물은 지진이나 고정하중에 의한 영향보다 바람의 의한 영향이 매우 중요하다고 볼 수 있다. 또한, 풍하중은 주변 환경 및 구조물의 형태에 따라 그 크기가 매우 다르게 나타난다. 본 논문에서는, 우리나라에서 풍하중의 영향을 가장 많이 받은 지역들 중에 건설된, 2개 경기장의 설계 풍하중과 풍동실험 결과값들을 비교 검토해 보고자 한다.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.49-54
• /
• 2005

Inner Structured and Bonded(ISB) panel, a kind of metallic sandwich panel, consists of two thin skin plates bonded to a micro-patterned inner structure. Its overall thickness is $1\~3mm$and it has attractive properties such as ultra-lightweight, high efficiency in stiffness-to-weight and strength-to-weight ratio. In many previous studies, resistance welding, brazing and adhesive bonding are studied for joining the panel. However these methods did not consider productivity, but focused on structural characteristics of joined panels, so that the joining process is very complicated and expensive. In this paper, a new joining process with resistance welding is developed. Curved surface electrodes are used to consider the productivity and the stopper is used between electrodes during welding time to maintain the shape of inner structure. Welding time, gap of electrodes and distance between welding points are selected as the process parameters. By measuring the tensile load with respect to the variation of welding time and gap of electrodes, proper welding conditions are studied. Welding time is proper between 1.5-2.5cycle. If welding time is too long, then inner structures are damaged by overheating. Gap of electrode should be shorter than threshold value fur joint strength, when total thickness of inner structure and skin plate is 3.3mm, the threshold distance is 3.0mm.

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.339-354
• /
• 2007

Arched Corrugated Steel Roof (ACSR) is a kind of thin-walled steel shell, composing of arched panels with transverse small corrugations. Four full-scale W666 ACSR samples with 18m and 30m span were tested under full and half span static vertical uniform loads. Displacement, bearing capacities and failure modes of the four samples were measured. The web and bottom flange in ACSR with transverse small corrugations are simplified to anisotropic curved plates, and the equivalent tensile modulus, shear modulus and Poisson's ratio of 18m span ACSR were measured. Two 18 m-span W666 ACSR samples were analyzed with the Finite Element Analysis program ABAQUS. Base on the tests, the limit bearing capacity of ACSR is low, and for half span loading, it is 74-75% compared with the full span loading. When the testing load approached to the limit value, the bottom flange at the sample's bulge place locally buckled first, and then the whole arched roof collapsed suddenly. If the vertical loads apply along the full span, the deformation shape is symmetric, but the overall failure mode is asymmetric. For half span vertical loading, the deformation shape and the overall failure mode of the structure are asymmetric. The ACSR displacement under the vertical loads is large and the structural stiffness is low. There is a little difference between the FEM analysis results and testing data, showing the simplify method of small corrugations in ACSR and the building techniques of FEM models are rational and useful.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.