• 대한영양사협회학술지
• /
• 제14권1호
• /
• pp.1-12
• /
• 2008

The Purposes of this study were to assess high school students' nutrient consumption at the ordinary time and to analyze nutrient contents and nutrition consumption of lunch. The questionnaires for self-reported food consumption were distributed to 210 students enrolled in a boy's high school and a girl's high school located in Seoul area. A final response rate was 87.1%, excluding responses that had significant missing data. Data of self-reported food consumption and BMI(Body Mass Index) were analyzed with descriptive analysis and t-test using SPSS Win(ver. 12.0). To measure the serving size and the waste amount, data were collected for three meals in a three day period at each school. A weighed plate method was employed to measure plate wastes and consumption of the menus served. Nutrient analyses for the served and consumed menus were performed using CAN-PRO. The result of nutrient intake determined by self-reported food consumption demonstrated 74.2% of boys and 70.0% of the girls did not meet EAR(Estimated Average Requirement) for calcium. In addition, the data collection showed that 60.2% boys and 26.7% girls did not consume EAR for Vitamin B$_1$. Nutrient analyses of the served and consumed menus at school lunch were compared with 1/3 of the Dietary Reference Intakes(DRIs) for this age group. The served menus did not meet 1/3 of the Recommended Intake(RI) for calcium, iron, and vitamin B$_2$. In contrast, the menu provided to students exceeded almost five times(490%) more than the sodium needed for 1/3 of the Adequate Intake(AI). Considering the amount of the students' plate waste, intake of vitamin A and vitamin C were below 1/3 of the RI, and calcium, iron, and vitamin B$_2$ intake were also reduced. Students' sodium consumption still exceeded 1/3 of the AI at 340.0%.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.184-193
• /
• 2003

Cyclic sweep voltametry was performed to investigate the electrochemical behavior of heavy metal ions and the organic additives in surface finishing process. And electrolysis using parallel plate electrode electrolyzer was carried out to simulate the treatment of real waste water. Results showed that more than 99 percent of Cu was recovered and selective recovery of Cu in mixed waste water was possible, but the possibility of economical recovery of Ni and Cr were very low due to the evolution of hydrogen gas. Electrochemical oxidation of cyanide and organic additives on anode showed very excellent removal rate. The complete removal of several hundred ppm of cynide was possible within several tens minutes and organics within 2 or 3 hours. Even in case of concentrate waste water, the complete removal of COD by using NaCl and air stirring seemed to be possible.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.342-348
• /
• 2001

This study was conducted to obtain granular crystalline gypsum that can be used as raw material for plaster boards or cements from waste Plaster board. We could disintegrate preferentially gypsum to gypsum needle in 10${\mu}{\textrm}{m}$ or less size among the contents of waste plaster board (gypsum, paper, fiber, and inorganic material .etc.) by hydration afterwards the dehydration of crushed waste plaster board. In this case, the optimum conditions for minimizing the size of gypsum were dehydration rate of 75%~ 85%, hydration concentration of 10~20%, agitation speed of 250~400rpm, crushing size of 2cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield from under screenings of 325mesh wet screening which followed by the dehydration-hydration process performed in the conditions of dehydration rate of 80%, hydration concentration of 15%, agitation speed of 300rpm, crushing size of 2cm or less. Subsequently, Plate-like Crystalline gypsum of is 151${\mu}{\textrm}{m}$ size and the grade of 99.49% with the Yield of 98.0% from the upper screenings of 270mesh wet screening carried out after the re-crystallization of the recovered gypsum needle slurry.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.43-52
• /
• 2001

This study was conducted to obtain granular crystalline gypsum that can be used as raw material for Plaster boards or cements from waste Plaster board. Gypsum could be Preferentially disintegrated to gypsum needle in $10\mu\textrm{m}$ or less size by hydration after the dehydration of crushed waste Plaster board. The finer the gypsum needle, it is easier to remove coarse impurities and to recover the gypsum needle. The optimum conditions for obtain the finer gypsum size were dehydration rate of 75~85%, solid concentration at hydration of 10~15%, agitation speed of 250~400 rpm, crushing size before dehydration of 2 cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield as the undersize of 325 mesh wet screening followed by the dehydration-hydration process performed at the conditions of dehydration rate of 80%, solid concentration at hydration of 15%, agitation speed of 300 rpm, crushing size before dehydration of 2 cm or less. After the recrystallization of recovered gypsum, Plate-like gypsum of $151\mu\textrm{m}$ size with 99.49% grade was obtained as the oversize of 270 mesh in a wet screening.

• 자원리싸이클링
• /
• 제31권4호
• /
• pp.34-39
• /
• 2022

본 연구에서는 약 3.5% 구리 함유 폐에칭액으로부터 구리를 회수하기 위한 철 샘플에 따른 시멘테이션 반응 시 초음파 에너지 인가에 의한 반응 속도와 구리 회수율에 미치는 영향을 조사하였다. 그 결과 단순 교반 공정에 비해 시멘테이션 반응이 효과적으로 일어나 같은 시간 대비 높은 구리 회수율을 나타냈다. 단순 교반과 초음파에너지를 가하였을 때를 비교해보면, 25분 반응에 따라 철 샘플 형태가 plate를 사용하였을 때, 약 9.5%가 56.6%로 향상되었으며, chip은 약 14.0%에서 46.1%, powder는 약 41.9%에서 77.2%로 증가하였다. 이는 시멘테이션 반응으로 생성되어 철 표면을 덮고 있던 구리가 탈착되며 연속반응이 유도되었고, 구리 회수율은 약 2배에서 6배까지 증가하였으며, 회수된 구리의 입자 크기 또한 감소하는 경향을 확인할 수 있었다.

• 한국환경농학회지
• /
• 제18권1호
• /
• pp.48-53
• /
• 1999

본 연구에서는 폐기물의 재활용 측면에서 폐굴껍질을 이용하여 축산폐수에 함유되어 있는 $PO_4^{3-}-P$의 제거특성을 검토해본 결가, 다음과 같은 결론을 얻었다. 입경이 작을수록 흡착속도가 빠르게 진행되어 흡착평형에 도달하는 시간이 빠른 것을 알 수 있다. 주입량과 수온이 증가할수록 평형상태에 도달하는데 다소 더 긴시간을 요하는 것을 알 수 있다. 반응초기 낮은 pH에서는 흡착현상에 지배적으로 영향을 받는 것으로 추정되지만, 시간이 경과함에 따라 pH상승과 더불어 정석반응이 우세하게 진행되고 있는 것을 알 수 있다. 등온흡착식을 적용해본 결과에서도, 폐굴껍질은 $PO_4^{3-}-P$의 제거는 흡착현상 보다는 오히려 정석반응에 더 많은 영향을 받는 것으로 여겨진다. SEM 관측결과에 의하면 폐굴껍질 표면에서 뚜렷한 변화는 거의 볼 수 없으나 반응전에 비하여 폐굴껍질의 입경이 비교적 크고 조그만 판상의 형태를 간헐적으로 보이고 있다.

• 설비공학논문집
• /
• 제15권1호
• /
• pp.59-66
• /
• 2003

The purpose of this study is to analyze the characteristics (COP) of the heat pump system for various operating conditions with the use of seawater heat source and exhaust energy. To accomplish the goal, first of all, the computer simulation for heat pump system is carried out. The heat pump system model is made of a waste heat recovery system and a vapor compression refrigeration system, and the working fluid is R-22. The model calculated the change of COP with the variation of temperature and flow rate. The COP and the plate heat exchanger (PHE) area of the heat pump system are considered moderately high in the condensation temperature of $25^{\circ}^C$ and the evaporation temperature of $2^{\circ}^C$ in indoor culture system. The simulation results will be used effectively for the design and the performance prediction of heat pump system using unused energy in a land base aquaculture system.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.239-248
• /
• 1997

The nesting of parts cut on raw steel plate has been a subject of interest to the shipbuilding industry for many years. "Nesting" is defined operation of layout of the parts on the raw material with minimizing the waste rate. Therefore, it is very important to optimize the cutting area. Since the existing nesting programs are prepared for expensive workstations and the expert, it is needed to develop nesting program for personal computer to improve the technology of small/middle sized shipyards and their productivity. This study involves development and application of appropriate optimization technique to solve the problem of plate nesting. And the appropriate D/B for storing nesting data developed, the function of D/B is introduced in this paper.his paper.

• 동아시아식생활학회지
• /
• 제18권4호
• /
• pp.507-515
• /
• 2008

This study investigated the standard recipe and changes in the quality characteristics of Chungkukjang-Kimchi (CKK) and evaluated its acceptance by elementary school students. The acceptability of Kimchi among elementary school students was evaluated by monitoring the plate waste rate. Chungkukjang powder was added to the Kimchi recipe at 0, 20, 40, 60% of the total weight of red pepper powder. The pH of the CKK decreased as fermentation proceeded, and the total acidity was $0.24{\sim}0.25%$ in all samples. The salinity of the CKK was 2.32%. The L color value was significantly lower in the treatment groups than in the control group. The b and a color values increased in the beginning, but tended to decrease during fermentation. In the sensory evaluation, there was no significant difference in appearance on preparation day, but there were significant differences on the 6th (p<0.05) and 20th days (p<0.01), with the highest scores observed in the 40% added group. Sourness increased significantly (p<0.001) during fermentation in all samples. There were significant differences (p<0.001) in crispness on the 3rd day among the treatment groups, and it tended to decrease as fermentation progressed. There were significant differences in flavor during the early stage (p<0.001), but there were no differences as fermentation proceeded. Overall acceptability was high in the 40% added group. Evaluation of acceptability by monitoring the plate waste rate in the school dining room showed that acceptability was highest in the 20% added group. Thus, it was concluded that acceptability among elementary school students was highest for CKK from the 20% Chungkukjang group.

• Journal of Radiation Protection and Research
• /
• 제42권3호
• /
• pp.141-145
• /
• 2017

Background: The concrete walls inside the vaults of cyclotron facilities are activated by neutrons emitted by the targets during radioisotope production. Reducing the amount of radioactive waste created in such facilities is very important in case they are decommissioned. Thus, we proposed a strategy of reducing the neutron activation of the concrete walls in cyclotrons during operation. Materials and Methods: A polyethylene plate and B-doped Al sheet (30 wt% of B and 2.5 mm in thickness) were placed in front of the wall in the cyclotron room of a radioisotope production facility for pharmaceutical use. The target was Xe gas, and a Cu block was utilized for proton dumping. The irradiation time, proton energy, and beam current were 8 hours, 30 MeV, and $125{\mu}A$, respectively. To determine a suitable thickness for the polyethylene plate set in front of the B-doped Al sheet, the neutron-reducing effects achieved by inserting such sheets at several depths within polyethylene plate stacks were evaluated. The neutron fluence was monitored using an activation detector and 20-g on de Au foil samples with and without 0.5-mm-thick Cd foil. Each Au foil sample was pasted onto the center of a polyethylene plate and B-doped Al sheet, and the absolute activity of one Au foil sample was measured as a standard using a Ge detector. The resulting relative activities were obtained by calculating the ratio of the photostimulated luminescence of each foil sample to that of the standard Au foil. Results and Discussion: When the combination of a 4-cm-thick polyethylene plate and B-doped Al sheet was employed, the thermal neutron rate was reduced by 78%. Conclusion: The combination of a 4-cm-thick polyethylene plate and B-doped Al sheet effectively reduced the neutron activation of the investigated concrete wall.