• 한국농공학회논문집
• /
• 제49권4호
• /
• pp.63-70
• /
• 2007

The soil samples used in this study were prepared with the residual granite soils passed through the #4 sieve and obtained from Pocheon in Gyeonggi-Ki do. Specifically, five types of samples were prepared. Sample A which is a natural state soil was classified as SM according to the uses. Samples of B, C, D, and E were prepared by mixing Sample A with bentonite and were classified as SC according to the uses. The plasticity indexes of samples B, C, D, and E were 15, 25, 30, and 40, respectively. The specimens, whose dimensions are 100mm by 127.5mm, were prepared by A method of ASTM D 698 with the Proctor mold. In experiments, the loading with the 1%/min was applied. Four different disk diameters, 13mm, 26mm, 38mm, and 52mm were used in the Improved Unconfined Penetration (IUP) tests. To compare the tensile strengths, the split tensile tests were also conducted on the same specimens used for the IUP tests. To find out the effects of moisture contents, plasticity Index of specimens on the tensile strength, six different water contents were used for making a specimen.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.29-32
• /
• 2016

A series of laboratory tests were conducted to investigate the geotechnical engineering characteristics of muskeg soil for construction machinery widely distributed in cambridge region in Canada which makes problems in construction works. Physical characteristics of cambridge region muskeg soil were measured in terms of such categories as nature water content, organic content, specfic gravity, liquid limit, and plasticity index. As the test result, it was found that nature water content, organic content, specific gravity, liquid limit, plasticity index, and compression strength were 50.8~343.8%, 12.1~42.5%, 1.76~2.57, 46.6~440.2%, 25.6~280.5, $0.665{\sim}1.537kg/cm^2$, respectively.

• Geomechanics and Engineering
• /
• 제4권2호
• /
• pp.135-150
• /
• 2012

This paper presents the study of the effect of microorganism Bacillus pasteurii on the properties such as Atterbergs' limit and unconfined compressive strength of cohesive soils. The results of this study reveal that the liquid limit and plasticity index for all clay soils decreased and the unconfined compressive strength increased. Decrease in plasticity index is very high for Kuttanad clay followed by bentonite and laterite. The unconfined compressive strength increased for all the soils. The increase was high for Kuttanad soil and low for laterite soil. After 24 h of treatment the improvement in the soil properties is comparatively less. Besides the specific bacteria selected Bacillus pasteurii, other microorganisms may also be taking part in calcite precipitation thereby causing soil cementation. But the naturally present microorganisms alone cannot work on the calcite precipitation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2002

Based on the results obtain from the investigation of Nak-Dong River District, it was classified as very thick, soft soil deposit. Furthermore, during the construction of structures large settlements are expected. Since large settlement affects the structures life, it is very important to accurately determine the consolidation of soil based on the obtained results. In this study piezocone test and laboratory test were performed to determine the consoildtion properties of Nak-Dong River District Pusan, Gyeong-Nam province. Degree of consoildation and the coefficient of consoildation obtained from the data of piezocone test and the results of the Oedometer test were compared and analyzed. Using the results the porewater pressure coefficient($B_q$) was obtained and the relationship with the Plasticity Index was also determined. From the results of this study the effects of the degree of consolidation and consolidation coefficient, and the porewater pressure coefficient and the Plasticity Index was determined.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.223-232
• /
• 2019

Since the actuators with small- scale structures may be exposed to external reciprocal actions lead to create undesirable loads causing instability, the buckling behaviors of them are interested to make reliable or accurate actions. Therefore, the purpose of this paper is to analyze plastic buckling behavior of the micro beam structures by adopting a Conventional Mechanism-based Strain Gradient plasticity (CMSG) theory. The effect of length scale on critical force is considered for three types of boundary conditions, i.e. the simply supported, cantilever and clamped - simply supported micro beams. For each case, the stability equations of the buckling are calculated to obtain related critical forces. The constitutive equation involves work hardening phenomenon through defining an index of multiple plastic hardening exponent. In addition, the Euler-Bernoulli hypothesis is used for kinematic of deflection. Corresponding to each length scale and index of the plastic work hardening, the critical forces are determined to compare them together.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.237-248
• /
• 1996

• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.97-104
• /
• 2015

실제 현장에서 준설매립공사를 수행하기 전의 설계 단계에서, 연약지반 개량설계를 수행할 때, 압축지수와 비배수 전단강도와 같은 설계정수를 합리적으로 평가하는 것은 최적공사비 산정측면에서 매우 중요한 사항이라고 할 수 있다. 본 연구에서는 유사 준설매립 현장에서 실시된 원위치 전단강도시험 및 불교란 시료 채취를 통해서 압밀 및 강도정수를 평가하였다. 이때, 배사관을 이용한 준설매립방법으로 투기된 준설매립층의 함수비 및 압축지수는 원지반 조건보다 오히려 감소하는 경향을 나타냈다. 압밀시험에 의해 준설매립지반의 압축지수와 함수비의 관계, 원위치 베인전단 시험으로 비배수 전단강도와 함수비의 관계를 각각 평가하였으며, 저소성 실트지반에 대한 Schmertmann의 압축지수 보정방법의 적용성을 판단하기 위해서 실제 침하량과 설계 예측침하량의 비교 분석을 실시하였다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1672-1679
• /
• 2002

This paper provides an engineering J estimation equation for cylinders with finite internal axial surfacecracks under internal pressure. The proposed equation is the J estimation equation based on deformation plasticity using Ramberg-Osgood (R-O) materials. Based on detailed 3-D FE results using deformation plasticity, plastic influence functions for fully plastic J components are tabulated for practically interesting ranges of the mean radius-to-thickness ratio, the crack depth-to-length ratio, the crack depth-to-thickness ratio. the strain hardening index for the R-O material, and the location along the semi-elliptical crack front. Based on tabilated plastic influence functions, the J estimation equation along the crack front is proposed and validated for R-O materials. Good agreements between the FE results and the proposed J estimation provide confidence in the use of the proposed method to elastic-plastic fracture mechanics of pressurized piping.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.23-30
• /
• 2001

건설현장에서 항상 문제가 되는 영동지역에 널리 분포하는 유기질토에 대한 공학적 특성을 규명하고자 지역별 대표적인 불교란 시료를 채취하여 실내 시험을 행한 결과를 분석 검토하여 다음과 같은 결론을 얻었다. 영동지역 유기질토의 물리적 특성은 자연함수비가 50.8~343.5%, 유기물 함유량이 12.1~42.5%, 비중이 1.76~2.71, 액성한계가 46.6~440.2%, 소성지수가 9.2~557.2%이다. 압밀하중이 증가할수록 약간의 기복이 있었으나, 압밀계수는 대체로 약간 작아지는 경향을 나타내고 있다. 2차압밀계수와 압축지수와의 관계는 $C_a/C_c$의 값이 0.001~0.091의 범위로 나타났고, 2차 압밀계수는 유기물 함유량이 11~22%범위에서는 크게 증가하는 경향을 나타냈다.

• 소성∙가공
• /
• 제18권2호
• /
• pp.128-134
• /
• 2009

The present study covers an integrated simulation method to evaluate optical performance of an aspheric plastic lens by connecting an injection molding analysis with a ray tracing simulation. Traditional ray tracing methods have based on the assumption that the optical properties of a lens are homogeneous throughout the entire volume. This assumption is to a certain extent unrealistic for injection-molded plastic lenses because material properties vary at every point due to the injection molding effects. To take into account the effects of the inhomogeneous optical properties of the molded lens, a numerical scheme is developed to calculate the distribution of refractive index induced from the injection molding process. This index distribution is then reflected onto CODE $V^{(R)}$ simulation and used to calculate ray paths in inhomogeneous media. The proposed tracing scheme is implemented on the tracing of an aspheric lens for a mobile phone camera module.