• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.1
• /
• pp.73-81
• /
• 1996

The expriment was carried out to clarify the fertilizer efficiency of a garbage-based compost in cultivation of leaf vegitables. 1. Only application of 8 tons per 10 of the compost did not have any growth injury to "Osaka-shirona" (a cultivar of Brassica pekinensis L.) in a pot experiment 2. In four continuous cropping with application of 3 tons per 10 a of the compost before every seeding, "Osaka-shirona" grew satisfactorily. 3. Osaka-shirona, spinich and garland chrysanthemum were cultivated under a plastic house applied with 2 tons per a of each of the garbage-based compost and cattle manure, delayed release fertilizer and bark compost on the market. There was no difference of the vegetable yields among the applied field, as well as of the contents of ${\beta}$-carotene, vitamin C, Ca and Fe.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.56-62
• /
• 2007

In this study, we carried out the research on triboelectrostatic separation for heavy group plastics (PET, PVC) recovered from wet gravity separation. From the research on charging characteristic for the choice of charging materials, it was found that PP was optimum charging material to make high charging amount with opposite polarity for PET and PVC of heavy group. Therefore, we manufactured a charger of cyclone type using PP material for separation of PET and PVC. At optimum test conditions that used PP cyclone charger developed in this study, we developed a triboelectrostatic separation technique that can separate PET plastic up to grade of 98.5% and recovery of 86.2%. We established new separation technology that could recycle the PET and PVC heavy group plastics recovered from wet gravity separation.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.54-61
• /
• 2001

As a part of the movement of natural resources conservation, there have been doing many recycling research works for obsolete aged tire, wasted plastic materials, etc. The purpose of this experimental study is to develop glass concrete by recycling wasted glasses as a cementitious constituent in concrete. First of all, the optimum replacement ratio of powdered waste glasses(PWG) can be determined through pilot compressive strength test on normal and high strength concrete cylinders, which have been made in various mix proportions by changing the replacement ratio of PWG. Then, further tests have been done to figure out mechanical properties of most desirable glass concrete with optimum replacement ratio of PWG, such as static modulus of elasticity, compressive and tensile strengths, flexural strength. On the other hand, the alkali-silica reactions by the mortar-bar method(KS F 2546) have been experimentally doing in various grain sizes of PWG, since the alkali in the cement has a tendency to react with the silica in the PWG. In can be confirmed from the test that glass concrete can have better workability than concrete with silica fume, and they are alike in compressive strength. It is concluded that wasted glasses can be used as pratical additives for economic and environmentally friendly concrete.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.2
• /
• pp.113-129
• /
• 1998

To suggest the separate collection system of garbage in household, people's disposition was evaluated. It was indicated that garbage be collected daily to minimize the odor which was major nuisance from garbage. However, most people wanted to discharge garbage in two or three days interval, as they did not prefer frequent handling. So, proper size of garbage container was determined as two to three days capacity. In contrast with it, it was major opinion that dicharged garbage should be collected everyday by local government to eliminate the outdoor pollution. Plastic bag was the most popular container, as it could be used instantly. Price of the bag affected on the efficiency of reduction and separate collection of garbage. Low price increased the separate collection and decreased the reduction, while high price introduced the opposite result. So, the dual price system was suggested to enhance both objectives.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.101-111
• /
• 2009

In this study, the physico-chemical characteristics of municipal solid waste (MWS) which was treated in gangwon area were investigated. It is necessary to measure the characteristics of municipal solid waste for build a waste treatment and RDF facility and for data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $101.8{\sim}199.8kg/m^3$. This MSW was composed of 30.7% of food wastes, 36.3% of papers, 15.8% of plastics & vinyls, 1.9% of textiles, 3.2% of wood and 1.5% of rubber & leathers respectively. Most of MSW are composed of food, paper and plastic waste and the combustible waste is more than 90%. For three components, moisture is 44.6%, combustible component is 47.7% and ash is 7.7% respectively. The chemical elements are carbon, oxygen, and hydrogen on the dry basis of wastes. The low heating value of the MSW measured by calorimeter was obtained as 2,631 kcal/kg, and the high heating value of the MSW was obtained as 3,310 kcal/kg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.138-147
• /
• 2006

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in national park area kyungnam-do landfill were investigated. It is necessary to measure the characteristics of MSW and sludge to build a waste treatment facility, the data-base and total managing of the landfill. This MSW was composed of 34.62% of food wastes, 36.05% of papers, 15.37% of plastics & vinyls, 2.28% of textiles, 3.33% of wood, 0.49% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 90% was combustible waste. For three components, moisture is 29.84%, combustible component is 62.30% and ash is 7.86%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. Also, the low heating value of the MSW which is measured by calorimeter is calculated as 2377.8kcal/kg. low heating value of the sludge is calculated as 338.06kcal/kg.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.46-49
• /
• 2008

Recycling glass fiber, 'F-fiber,' was obtained by the separation of the roving layer from waste FRP and the concrete products or structures were considered for its application. Experiment was carried out for the bending strength of aggregate (2.45 of cement) by weight and F-fiber (density of 1.45, volume ratio to all of the aggregate and the cement). Whereas the specimen containing 1% F-fiber showed the bending strength 23% higher than that without F-fiber after curing far 28 days, the one with 0.5% F-fiber did not give any change. It could be found, therefore, that the minimum mixing amount should be larger than 0.5% fur the strength reinforcement. One of the reinforcing concrete product, bench flume, containing 1% F-fiber showed 21% increment of bending strength In contrast to that without F-fiber.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.97-106
• /
• 2005

현재 우리나라에서만 연간 약 26만들이 발생되고 있는 농업용 폐비닐은 재생원료로 재활용되어지면 국내외에서 그 용도가 매우 많으나 멀칭용으로 사용되었던 폐비닐은 그 오염도가 워낙 심하여 쉽게 재활용할 수 없는 처지이다. 즉 공급과 수요는 많으나 재생기술의 한계가 병목으로 작용하고 있는 현실이다. 따라서 간단하고 경제적인 방법으로 재활용할 수 있는 습식 및 건식 재생기술의 개발이 계속되어 요구되어 왔다. 강제 세척, 회전분리, 열풍 건조 및 압착성형을 이용한 새로운 간이습식공정을 통하여 멀칭용 농업용 폐비닐을 순도 95% 이상의 탄화 및 열화가 적은 압착 펠렛을 경제적으로 제조할 수 있었다. 이들의 재생 수지는 인장강도 $168.6{\pm}3.9kgf/cm^2$, 파단신을 315.8%, 인장탄성을 $2,551.8{\pm}50.1kgf/cm^2$, 굴곡강도와 굴곡탄성을 $166.7{\pm}7.4kgf/cm^2,\;5,716.2{\pm}242.2kgf/cm^2$ 그리고 충격강도는 $49.2kgf\;cm/cm$을 각각 보여 연질수지로써 기능하기 위한 충분한 성능을 보유하고 있음을 알 수 있었다. 또한 이들의 응용분야 확대를 위하여 fly ash 및 탄산칼슘을 배합하여 이들의 물성변화를 살폈다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2008

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in four different area were investigated. It is necessary to measure the characteristics of MSW to build a waste treatment and Refuse Derived Fuel (RDF) facility, the data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $78.15-199.8kg/m^3$. This MSW was composed of 8.87% of food wastes, 38.8% of papers, 34.12% of plastics & vinyls, 7.16% of textiles, 0.96% of wood, 1.3% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 94% was combustible waste. For three components, moisture is 17.38%, combustible component is 69.03% and ash is 6.24%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. And the low heating value of the MSW which is measured by calorimeter is calculated as 2973.8 kcal/kg and high heating value of the MSW is calculated as 5209.94 kcal/kg.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.