• 펄프종이기술
• /
• 제32권1호
• /
• pp.57-64
• /
• 2000

As a method to reduce the sue of agricultural chemicals mulching with thin plastic films has been commonly practised for many years. Although use of plastic films for mulching is very effective in preventing herb growth it is almost impossible to remove all of the plastic films from the agricultural lands and the remaining films eventually contaminate the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. In this paper the possibilities of using strength resins for improving strength properties of mulch papers made from old corrugated containers were examined. Also mulch papers have been produced and applied for practical farming in upland as well as paddy field. Result showed that the usage of 0.7% of wet strength additives was effective for wet and dry strength of mulch paper. Changes of various process parameters including freeness, cationic demand, one pass retention, nitrogen content, etc. that occurred during trial production of mulch paper have been examined and discussed . It was found that paper mulching was very effective for weed control both in upland field and paddy filed.

• 대한환경공학회지
• /
• 제37권7호
• /
• pp.426-431
• /
• 2015

우리나라에서 플라스틱으로 인한 해양오염이 심각함에도 불구하고 경로 예측 및 수거 방안에 대한 연구는 찾아보기 어렵다. 본 연구에서는 미국 해양대기청(National Oceanic and Atmospheric Administration, NOAA)의 해양 표층해류 시뮬레이터(Ocean Surface CURrent Simulator, OSCURS)를 이용하여 2004년부터 2013년까지 계절별로 동 서해로 유입된 플라스틱 폐기물의 이동 경로를 예측하였고, 매개 중심성 분석을 통하여 효율적인 수거지점을 제안하였다. 효율적인 수거지점의 대부분이 계절과 상관없이 연안에 형성되었고, 그중에서도 동해는 울진 연안, 서해는 새만금-신안 연안이 플라스틱 폐기물을 효율적으로 수거할 수 있는 지역이었다.

• 자원리싸이클링
• /
• 제23권4호
• /
• pp.30-36
• /
• 2014

자동차 산업의 발달과 함께 환경오염 문제가 심각해지면서 연간 300,000톤 이상 발생하는 폐타이어의 재활용에 대한 관심이 높아지고 있다. 본 연구에서는 폐타이어 재활용을 목적으로 40, 80, 140 mesh 크기의 폐타이어 분말을 선별한 후, 입도 분석을 통하여 크기를 확인하고 그 형상을 SEM을 통해 관찰하였다. 또한 각각의 폐타이어 분말을 Virgin PP와 혼합하고 Intermeshing Corotating Twin Screw Extruder를 이용하여 TPV를 제조하고 특성 분석을 하였다. 이 중 효과가 좋은 140 mesh의 폐타이어 분말과 Virgin PP, Waste PP, PP-g-MA 세 가지 종류의 매트릭스를 다양한 비율로 혼합하여 TPV를 제조한 후 UTM을 통한 인장강도, 연신율과 Izod impact로 충격강도 등을 측정하였고 TGA로 열안정성을 확인하였다. 또한 SEM을 통하여 폐타이어 분말의 분산정도 및 파단면을 확인하였다.

• Ocean and Polar Research
• /
• 제45권3호
• /
• pp.125-140
• /
• 2023

We investigated meiofaunal biofouling (40-1,000 ㎛) on stranded marine plastic debris (hereafter MPD) collected from 8 coastal areas highly affected by plastic pollution located in the southern part of Korea during June, 2021, in order to analyze the abundance and composition of MPD associated organisms. A total of eight shapes of MPD was collected and classified into four types of plastics (LDPE, PET, PP and EPS) based on Resin Identification Coding System. Meiofounal biofouling was identified into 35 taxa belonging to 11 phylum, 10 classes and 12 order, and were numerically dominated by harpacticoids (EPS: 21.6%, PP: 27.1%), nematodes (LDPE: 23.2%) and foraminiferans (PET: 29.6%). Surface area of MPD was negatively correlated with abundances of organisms on the plastic debris (r = -0.487, p < 0.05, n = 24), indicating that abundances (avg. 3,225 inds. 0.1 m^-2) on the smallest area of PP debris (avg. 0.0208 m² ) were higher than those (avg. 50 inds. 0.1 m^-2) on the largest area of LDPE debris (avg. 0.4029 m^-2). Whereas, there was no correlation between surface area of MPD and the number of taxa on the debris (r = 0.147, p = 0.49, n = 24). These results showed that higher abundances of meiofaunal biofouling were observed on the PP material debris than those on the other debris collected from eight hot spots of the southern coastal waters in Korea, associated with not only polymer type and surface area of the PP debris, but also possibly surface microstructure of the PP debris.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권4호
• /
• pp.263-273
• /
• 2015

전세계 플라스틱 해양쓰레기의 유입량과 현존량을 추정하였다. 한국에서 플라스틱 해양쓰레기의 연간 유입량(72,956톤)은 플라스틱의 연간 소비량(5.2백만톤)의 1.4%로 추정되었다. 유출량이 0이라는 가정과 함께, 이 1.4% 유입률을 1950년부터 2013년까지 전세계 플라스틱 생산량에 적용함으로써, 2013년 전세계 연간 플라스틱 해양쓰레기 유입량은 4.2백만톤이며, 2013년말 현재 플라스틱 해양쓰레기 현존량은 86백만톤으로 추정되었다. 또한 로지스틱 모델에 따라, 석유생산량의 4%가 플라스틱으로 생산될 때 플라스틱 해양쓰레기의 최종 현존량은 199백만톤이 될 것으로 추정되었다. 유입량과 현존량은 전혀 다른 측정단위이기 때문에, 유입 저감 정책의 효과성을 평가할 수 있는 개선된 지표가 필요하다. 또한, 플라스틱 해양쓰레기 오염은 거의 회복불가능하기 때문에, 이를 예방하는 대책의 가치는 훨씬 더 높게 평가되어야 하며, 사전주의의 원칙에 따라 더 강력한 예방 대책이 시행되어야 한다. 본 연구는 제한적인 정보에 근거한 예비 연구에 해당하므로 플라스틱 해양쓰레기의 유입량과 현존량의 경향을 규명하기 위한 추가 연구가 필요하다.

• 환경영향평가
• /
• 제18권6호
• /
• pp.453-460
• /
• 2009

In order to provide fundamental data for developing high-grade(high-quality and low-pollution) Refuse Derived Fuel(RDF), we analyzed caloric value and HCl content by Municipal Solid Waste(MSW) type. The caloric value was analyzed using calorimeter and HCl content was analyzed using mercury(II) thiocyanate method. In case of paper type the caloric value was 3,060~3,608kcal/kg and the HCl content was 239~6,135ppm. In case of vinyl-plastics the caloric value was 5,946~9,888kcal/kg and the HCl content was 429~455,771ppm. According to the result of quality assessment by MSW type, the calroric value of vinyl-plastics type was showed higher than that of paper type and in case of HCl content the paper type was showed lower than vinyl-plastics type. So, We mixed paper and plastic wastes. The caloric value of mixed MSW(paper and plastics) was 5,046~9,125kcal/kg and the HCl content was 239~6,135ppm. Also, The caloric value of packaging waste(film-plastics) was 5,982~8,045kcal/kg. Therefore It is possible to develop high-grade Refuse Derived Fuel through suitable mixing of paper and plastic in municipal solid waste.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.79-84
• /
• 2010

Three biological aerated filters (BAFs) composed of a PVC pipe with a diameter of 75 mm were constructed and operated at a waste-water temperature at $13^{\circ}C$. The media used for each BAF were: 5-mm gravel; 5-mm lava rock; 12.5-mm diameter by 15-mm long plastic rings, all with a media depth of 1.7 m. The feedwater, which simulated the effluent of aerated lagoons, had influent soluble chemical oxygen demand (sCOD) and ammonia concentrations of approximately 50 and 25 mg/L, respectively. For a hydraulic retention time (HRT) of two hours without recirculation, ammonia percent removals were 98.5, 98.9, and 97.8%, for the gravel, lava rock, and plastic rings, respectively. By increasing the effluent recirculation from 100 to 200% for an HRT of one hour, respective ammonia removals improved from 90.1 to 96, 76.5 to 90, and 65.3 to 79.5% for gravel, lava rock, and plastic rings. Based on the ammonia and sCOD loadings for different HRTs, the estimated maximum ammonia loading was approximately 0.6 kg $NH_3-N/m^3$-day for the three BAFs of different media types. The zero-order biotransformation rates for the BAF with gravel were found to be higher than the lava rock and plastic ring media. The results ultimately showed that BAF can be used as an add-on system to aerated lagoons or as a secondary treatment unit to meet ammonia discharge limits.

• Journal of Microbiology and Biotechnology
• /
• 제32권12호
• /
• pp.1561-1572
• /
• 2022

Plastic pollution has been recognized as a serious environmental problem, and microbial degradation of plastics is a potential, environmentally friendly solution to this. Here, we analyzed and compared microbial communities on waste plastic films (WPFs) buried for long periods at four landfill sites with those in nearby soils to identify microbes with the potential to degrade plastics. Fourier-transform infrared spectroscopy spectra of these WPFs showed that most were polyethylene and had signs of oxidation, such as carbon-carbon double bonds, carbon-oxygen single bonds, or hydrogen-oxygen single bonds, but the presence of carbonyl groups was rare. The species richness and diversity of the bacterial and fungal communities on the films were generally lower than those in nearby soils. Principal coordinate analysis of the bacterial and fungal communities showed that their overall structures were determined by their geographical locations; however, the microbial communities on the films were generally different from those in the soils. For the pulled data from the four landfill sites, the relative abundances of Bradyrhizobiaceae, Pseudarthrobacter, Myxococcales, Sphingomonas, and Spartobacteria were higher on films than in soils at the bacterial genus level. At the species level, operational taxonomic units classified as Bradyrhizobiaceae and Pseudarthrobacter in bacteria and Mortierella in fungi were enriched on the films. PICRUSt analysis showed that the predicted functions related to amino acid and carbohydrate metabolism and xenobiotic degradation were more abundant on films than in soils. These results suggest that specific microbial groups were enriched on the WPFs and may be involved in plastic degradation.

• Elastomers and Composites
• /
• 제56권3호
• /
• pp.164-171
• /
• 2021

Due to the problem of environmental pollution by plastics, it is necessary to decrease their consumption. In the case of PET bottles, it is essential to reduce the thickness of the bottle for the reduction of plastic used. For manufacturing PET bottles with reduced thickness, it is a prerequisite to design a preform with reduced thickness and study its molding capability. In this study, the injection molding capability was investigated after reducing the body thickness of the preform to 15% and 20%, respectively, for the two preform models currently in use. Injection molding analysis was performed on the existing models and on the models for reduced weight, under the molding conditions of the existing models. Using the computed results, temperature distribution, pressure distribution, deformation and clamping force were compared. Based on the analysis, the injection conditions of the preform model with less thickness were discussed.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.188-197
• /
• 2012

Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved aluminum plate has been performed only by labor works without systematic technique. Therefore, it is difficult to construct the aluminum ship that the design satisfies both required propulsion performance and hull design. Present study introduces a MPSF (Multi Point Stretching Forming) that is a flexible manufacturing technique to form large sheet panels of doubly curvature. The hull pieces are stretch-formed over the MPSD (multi-point stretching die) generated by the punch element matrix. In this study, MPSF is applied to deform the doubly curved surfaces of aluminum ship. The forming system including FEA (finite element analysis) of the processes for stretching the plate were carried out by static implicit analysis is suggested. Residual deformation of the surface is modeled by an elasto-plastic contact phenomena while the forming process is simulated by FEA. Finally, the proposed system is also validated, comparing the deformed shape by MPSF with that of object surfaces.