• 환경생물
• /
• 제25권2호
• /
• pp.100-106
• /
• 2007

농생태계 오이 시설재배지에서 서식하고 있는 지렁이상을 확인하기 위하여 강원도 정선 재배농가에서 조사하였다. 채집하여 동정된 지렁이는 총 4속 7종으로 다음과 같다. Aporrectodea trapezoides (Duges 1828), Aporrectodea tuberculata (Eisen 1874), Bimastos parvus (Eisen 1874), Amynthas koreanus (Kobayashi 1938), Amynthas corticis (Kinberg 1867), Amynthas hupeiensis (Michaelsen 1895), Drawida japonica (Michaelsen 1892). 채집된 종 중 고유종은 참지렁이 (Amynthas koreanus Kobayashi 1938)가 유일하다. 채집된 종들에 대해서 분류학적 특징에 관하여 기술하고, 자연 상태에서 확인한 외부형태 사진을 포함하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• 한국농공학회논문집
• /
• 제58권5호
• /
• pp.71-79
• /
• 2016

The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.291-294
• /
• 2011

We studies a model for management of pepper anthracnose based covering method and spraying system in field. 1. Among 82 organic fungicides, 42 materials showed most effective inhibition against mycelia growth of the Colletotrichum acutatum in vitro. 23 formulated biocontrol agents were chosen to control the disease from 42 biocontrol agents in greenhouse. In the end, five kinds (2 plant extracts, 2 biopesiticides, 1 Bordeaux mixture) were selected from 23 materials in the field. 2. The mulching materials of bed covering in fruit season were thin non-woven fabric sheet and black plastic. The use of a fabric sheet was reduced the spread of anthracnose as compared to the plastic covering. 3. The application with the chosen materials was reduced 34% of anthracnose for 7 times sprays to planting 70 days as compared to the untreated control. In yield, nonwoven fabric sheet with formulated biopesticides was increased 17% than black plastic. 4. This result indicated that the developed biocontrol strategy could be an effective and economic crop protection system in organic pepper cultivation field.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.149-158
• /
• 2014

The effects of spot cooling on growing ever-bearing strawberry in hydroponic cultivation during summer by spot cooling system was estimated in plastic greenhouse located in Pyeongchang. The temperature of cooling water was controlled by heat pump and maintained at the range of $15{\sim}20^{\circ}C$. Cooling pipes were installed in root zone and very close to crown. Spot cooling effect was estimated by applying system in three cases which were cooling root zone, crown plus root zone, and crown only. White low density polyethylene pipe in nominal diameter of 16 mm was installed on crown spot, and Stainless steel flexible pipe in nominal diameter of 15A was installed in root zone. Crown and root zone cooling water circulation was continuously performed at flowrates of 300 ~ 600 L/hr all day long. Strawberry yields by test beds were surveyed from Aug. 1 to Sep. 30. The accumulated yield growth rate compared with a control bed of crown cooling bed was 25 % and that of crown plus root zone cooling bed was 25 % and that of root zone cooling bed was 20 %. The temperatures of root spot in root zone cooling was maintained at $18{\sim}23.0^{\circ}C$ and that of crown spot in crown cooling was maintained at $19{\sim}24^{\circ}C$. Also, the temperatures of root spot in crown plus root zone cooling bed was maintained at $17.0{\sim}22.0^{\circ}C$ and that of crown spot was maintained at $19{\sim}25^{\circ}C$.

• 원예과학기술지
• /
• 제34권3호
• /
• pp.396-404
• /
• 2016

In this study, four cultivars of strawberry commonly grown in South Korea, 'Daewang', 'Seolhyang', 'Maehyang', and 'Ssanta', were evaluated for several qualities, including the presence of phytochemicals, sugar content, organic acids, and fruit hardness. The plants were cultivated on a high-bench bed system in a plastic greenhouse and drip irrigated. Fruit samples were collected three times in February 2013 to analyze the fruit characteristics. We found that the fruit hardness of the 'Daewang', 'Maehyang', and 'Ssanta' cultivars was greater than that of 'Seolhyang', however 'Seolhyang' showed the highest moisture content of all the cultivars, indicating that fruit hardness was negatively associated with moisture content. Furthermore, 'Seolhyang' was found to have the highest levels of phenolic compounds and anthocyanins compared to the other cultivars. 'Maehyang' had the highest amount of total sugars. 'Seolhyang' and 'Maehyang' accumulated higher amounts of total organic acids. As a result, 'Daewang' and 'Maehyang' were expected to be preferred by consumers because they had the highest ratio of sugar to total acid in their fruit.

• The Plant Pathology Journal
• /
• 제22권3호
• /
• pp.283-288
• /
• 2006

Trichoderma harzianum YC459 (Th 459), isolated from sawdust compost, was effective in controlling cucumber and tomato gray mold caused by Botrytis cinerea under controlled and plastic film tunnel conditions. A water suspension of the wettable powder formulation of Th 459 significantly $(P\leq0.05)$ reduced the severity of cucumber gray mold by foliar spraying at all tested concentrations from $10^5\;to\;10^8$ colony forming unit (cfu)/ml in repeated experiments. The control efficacy was maintained at least seven days with the average control value of 70% in cucumber pot tests. Mixing one to eight grams of the granular formulation ($10^8cfu/g$ dry weight) of Th 459 into one liter nursery potting mix at seeding also significantly $(P\leq0.05)$ reduced the severity of cucumber gray mold by suppression of lesion formation three weeks after treatment. Application of mixing granular formulation at seeding in combination with foliar spraying during cultivation provided a more significant reduction $(P\leq0.05)$ of cucumber gray mold than granule mixing or leaf spray alone. The foliar spraying of the formulated wettable powder of Th 459 significantly $(P\leq0.05)$ reduced the infection of tomato fruits by B. cinerea as effective as the chemical fungicide, dichlofluanid, in three plastic film tunnel experiment trials. It is suggested that effective control of gray mold of cucumber and tomato can be provided by both treatment of Th 459 into potting mix and foliar spray through induction of systemic resistance and direct inhibition of the pathogen.

• 생물환경조절학회지
• /
• 제29권2호
• /
• pp.161-170
• /
• 2020

국내 시설 농업의 99.2%를 차지하는 플라스틱온실의 내부 환경인자는 외부 환경의 변화에 민감하게 반응하고 온실 공간 내부에서 편차가 발생한다. 온도, 습도, CO₂, 광도의 환경인자를 계측하기 위한 지점을 3 × 3 × 5로 구성하여 데이터를 취득하고 내부 공간을 수직, 수평적인 측면으로 분할하여 환경 인자의 분포를 확인하였다. 계측지점의 최적점을 선정하고자 계측 공간을 수직, 수평적인 방향으로 분할하고, 측정 데이터와 이를 활용한 예측지점의 선형회귀분석 결과로 성능평가를 실시하였다. 일반적인 상황에서는 온도와 습도 인자의 경우 1개의 센서로 플라스틱온실 내부 환경의 계측이 가능할 수 있으나, 특정구간의 경우 다수의 센서를 활용하여 내부공간의 정밀성을 확보하는 것이 필요하다. CO₂의 경우 실험기간 내의 계측 매트릭스의 증가에도 불구하고 변이를 정의하는데 한계가 있음을 발견하였다. 조도 분포의 경우 일출 이후 지속적으로 회귀분석 결과가 작아짐을 발견하였다. 구조물의 간섭 등을 고려해 동일한 수평적인 방향에서 미계측 지점의 결정계수가 감소하였고, 센서 매트릭스 배치를 작물 높이 위로 위치하여 다수의 센서 노드 설치로 개선 가능하다고 예상된다. 외부 환경의 변화에 따라 온실 내부 환경이 불규칙하게 변화되며, 이 구간은 시설의 규격을 고려하여 계측 매트릭스를 구성해야 한다. 반대로 안정적인 구간에서는 최소한의 센서 노드로 내부 환경의 예측이 가능한 것을 확인할 수 있었다. 결과적으로 측정하고자 하는 환경인자와 시설의 구조 등 연구 및 재배자의 목적에 맞는 계측 매트릭스 위치 선정의 유동성이 요구되며, 덕트의 개폐위치를 조절하여 필요한 곳에 에너지를 투입하는 국소냉난방 및 생육제어 모델링 설계에 적용 가능하다고 판단된다.

• 생물환경조절학회지
• /
• 제31권1호
• /
• pp.8-13
• /
• 2022

본 연구는 동절기 공정육묘장의 수박 플러그 묘 생산 시, 난방 에너지 절감에 유리한 난방장치인 나노탄소섬유 적외선 난방등의 효율적인 사용을 위한 적정 전력과 설치 간격을 구명하기 위해 수행되었다. 유리온실 내 소형 베드 6개를 플라스틱 필름으로 구획을 나누었으며, 100cm 높이에 700W와 900W 난방등을 설치하였다. 난방등은 설치 간격을 각각 중앙 1개(Control), 60cm 간격(2개), 40cm 간격(3개)으로 설치하였다. 나노탄소섬유 적외선 난방등을 점등한 후 대조구를 제외한 모든 처리에서 설정한 야간 기온(20℃)을 유지하였다. 엽온은 난방등 설치 간격이 좁을수록 빨리 상승하는 경향을 보였다. 나노탄소섬유 적외선 난방등을 사용함에 따른 처리구간 수박 접목묘의 생육에는 뚜렷한 차이가 없었으나, 엽장과 엽폭은 700W 난방등에서 설치 간격이 짧을수록 길어지는 경향을 보였으며, 700W 난방등을 40cm 간격으로 설치하였을 때 묘의 충실도가 높은 값을 나타내는 것을 확인할 수 있었다. 따라서 야간 기온 유지와 묘의 충실도를 고려하였을 때, 700W 난방등을 40cm 간격으로 설치하는 것이 수박 접목묘를 생산하는데 경제성을 고려하여 효율적인 나노탄소섬유 적외선 난방등의 전력과 설치 간격으로 판단된다.