• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.123-132
• /
• 2016

The importance of energy saving technology for managing greenhouse was recently highlighted. For practical use of energy in greenhouse, it is necessary to simulate energy flow precisely and estimate heating/cooling loads of greenhouse. So the main purpose of this study was to develope and to validate greenhouse energy model and to estimate annual/maximum energy loads using Building Energy Simulation (BES). Field experiments were carried out in a multi-span plastic-film greenhouse in Jeju Island ($33.2^{\circ}N$, $126.3^{\circ}E$) for 2 months. To develop energy model of the greenhouse, a set of sensors was used to measure the greenhouse microclimate such as air temperature, humidity, leaf temperature, solar radiation, carbon dioxide concentration and so on. Moreover, characteristic length of plant leaf, leaf area index and diffuse non-interceptance were utilized to calculate sensible and latent heat exchange of plant. The internal temperature of greenhouse was compared to validate the greenhouse energy model. Developed model provided a good estimation for the internal temperature throughout the experiments period (coefficients of determination > 0.85, index of agreement > 0.92). After the model validation, we used last 10 years weather data to calculate energy loads of greenhouse according to growth stage of greenhouse crop. The tendency of heating/cooling loads change was depends on external weather condition and optimal temperature for growing crops at each stage. In addition, maximum heating/cooling loads of reference greenhouse were estimated to 644,014 and $756,456kJ{\cdot}hr^{-1}$, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.200.2-200.2
• /
• 2011

This study was carried out in order to estimate the greenhouse performance for Ground filtration water source heat pump which was installed for supplying the heat to the paprika greenhouse in Jinju city. Experimental area of Greenhouse was $3,300m^2$, For keeping the heat from greenhouse, single plastic covering and double thermal screen was installed. With considering all of greenhouse insulation condition and designed heatng temperature, heating capacity for experimental greenhouse was calculated as 320,000kcal/hr. Coefficient of performance(COP) of Ground filtration water source heat pump was gauged and greenhouse heating performance was tested from Febuary 1 to Febuary 28 in 2011. The result showed that COP of heat pump was in the range of 3.7~4.7 and COP of heating system was in the range of 3.0~3.5. The vaule of COP was very high and the temperature inside greenhouse was well corresponded to the setting temperature of greenhouse environment controlling system. lots of Ground filtration water made the the number of well fewer and the expense for installing heating system cheaper than that of geothermal system used custmarily. and this system went beyond the limitation of intaking amount of groundwater in normal Groundwater source heat pump.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.171-179
• /
• 2007

The greenhouse discrete optimum design program was developed using discrete optimum algorithm based on the genetic algorithm. The basic search method for the optimum design is the genetic algorithm, which is known to be very efficient for discrete optimization. In this paper, the objective function was the weight of the greenhouse structures and the constraints were the limits state design method. The design variables were galvanized steel pipes for plastic housing KSD 3760. Objective criteria were presented for the design of economic greenhouse structure and evaluation of its stability. The standardizations of greenhouse structure were used, as well as the normalization of greenhouse-related materials. Design examples were given to show the applicability of the optimum design using the discrete optimum algorithm based on the genetic algorithm of this study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.107-113
• /
• 2002

The pipe framed and arch shape plastic greenhouse, which is the most popular greenhouse in Korea, is relatively weak in snowdrift. Reinforcement of rigid frame or column is required to reduce the damage from heavy snow in this type. But additional rigid frames or columns decrease light transmissivity or workability, and increase construction cost. So it is desirable to prepare some temporary poles and to install them when the warning of heavy snow is announced. This study was carried out to develop the temporary pole supporting system using galvanized steel pipes for plastic housing and to evaluate the safe snow load on a temporary pole. A pipe connector, which is inserted in the top of pipe used in the temporary pole and supports the center purline, was designed and manufactured to be able to carry the upper loads safely. And a bearing plate was safely designed and manufactured in order to carry the loads acting on it to the ground. When temporary poles of ${\phi}$ 25 pipe are installed at 2.4m interval, it shows that the single span plastic greenhouses with 5~7 m width are able to support the additional snow depth of 13.9~25.3 cm beyond the snow load supported by main frame.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.251-258
• /
• 2014

In order to set up the basic environmental control systems which the new concept greenhouses have to equip, greenhouse characteristics, environmental management and control systems in domestic glasshouses and plastic houses were investigated and analyzed comparatively. Survey results on the width, length, eaves height, and the number of spans etc. showed that glasshouses were bigger than plastic houses significantly. New concept greenhouses claim to be plastic houses, but it will be reasonable to follow the specifications of the glasshouse. Specifications to be applied to new concept greenhouses were proposed as follows; hot water heating systems, aluminum screens as the thermal curtain, evaporative cooling systems, roof vents on the ridge, circulation fans, $CO_2$ enrichment, hydroponic systems, and automatic irrigation control systems. Environmental measurement systems for the indoor and outdoor temperature, humidity, light, wind speed and indoor $CO_2$ concentration have to be fully equipped. The automatic control system has to be as a complex environmental control system, not a single item control system. Also, for stable dissemination, domestically producing complete greenhouse control system should be made as soon as possible.

• The Korean Journal of Community Living Science
• /
• v.21 no.4
• /
• pp.551-558
• /
• 2010

It is a normal circumstance to have high temperature and high humidity in Greenhouses even though these climates are changed by the area, season, climates, the size of the greenhouse, and the crops being raised. Workers in the greenhouses have complained about their uncomfortable work environment and discomfort from the hot conditions, including sunburn. The farmers' ailments are not significantly different between those working in the in greenhouses and those working in the fields. The Farmers' syndrome was almost two times higher for women than those of men for greenhouse workers. This study was developed for functional fatigue clothes for plastic greenhouses which are known for high temperatures and humidity. The ergonomic function and thermal comforts of fatigue clothes were evaluated in the climatic chamber($30.0^{\circ}C$, 70.0%R.H.). The current fatigue clothes which are made of cotton or nylon were purchased at the market. The developed clothes are made of highly absorbent and high speed drying polyester. And these fabrics have excellent elasticity. In this study, the functional fatigue clothes were designed with longsleeved sport shirts and Full length pants. Tre, Tsk, Hcl, HR and the personal subjective sensations such as heat, humidity, and comfortableness were significantly lower when subjects wore the developed clothes made with polyester than the previous attire.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.192-199
• /
• 2009

This study was conducted to find proper structural reinforcement methods for the 4.5m-high (eaves height) 1-2W type plastic greenhouse. 3D finite element analysis was used to analyze the steel-tube structure. The 4.5m-high 1-2W type plastic greenhouse was modified by welding 1.5m-long steel-pipes into a 3.0m-tall columns of the standard 1-2W type plastic greenhouse. This remodeling method is widely used in Korea with farmer's discretion to increase the production when they grow paprika. But it is not based on the quantitative structural analysis. The proposed reinforcement methods were proved to stand against the design wind velocity of $40m{\cdot}s^{-1}$ and snow depth of 40cm. It strongly implies that the cross beam between side columns and wind resistance walls, and the lattice type cross beam should be good reinforcements to improve the structural safety of the elevated eaves height plastic greenhouse.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.6
• /
• pp.469-474
• /
• 2014

This study was performed to investigate the effects of sowing density and number of seeds sown on the emergence rate and growth characters of Panax ginseng C. A. Meyer under direct sowing cultivation in a blue plastic greenhouse. Ginseng seedlings, derived from seeds sown directly at different densities (90, 108, 135, and 162 seeds per $162m^2$), were cultivated in sandy loam soil within a blue plastic greenhouse. In contrast to the emergence rate, which decreased with an increase of sowing density, number of survival plant showed an increasing trend. Interestingly, the emergence and number of survival plant were significantly enhanced when 2 or 3 seeds were sown per hole compared with when one seed was sown per hole. Growth of the aerial parts of ginseng were not markedly influenced by sowing density or the number of seeds sown. However, chlorophyll content (SPAD values) increased with an increase in sowing density. Root parameters, such as root length, diameter, and weight, and the number of lateral roots decreased with an increase in sowing density, but were not noticeably influenced by the number of seeds sown. Total saponin content was the highest in the treatment plot containing 135 seeds. Similarly, the content of each ginsenoside was also tended to be higher in this treatment than in other treatment plots. On the basis of the results obtained in this study, it was possible to determine the optimal sowing density and seed number for the direct sowing cultivation of ginseng in blue plastic greenhouse.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• The monthly packaging world
• /
• s.259
• /
• pp.106-109
• /
• 2014