• Current Research on Agriculture and Life Sciences
• /
• v.24
• /
• pp.43-47
• /
• 2006

The soils of plastic film houses in which intensive cultivation takes place suffer from the serious problems such as severe salinity and accumulation of heavy metals etc. The objective of this research was to examine the change in soil properties with repeated cucumber cultivation under plastic film house at Gunwi-Gun area. The soils were classified mainly to Danbuk and SinJung series. Clay content is lower in the soils of plastic film house than in the field soil. Available $P_2O_5$ and exchangeable cations were accumulated at the level higher than the optimum range. The content of extractable heavy metals were higher in the soils of plastic film house than in those of the field. For optimum yield, much attention should be paied to the management of soils by the pre-soil survey.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.203-209
• /
• 1999

This study was conducted to obtain the basic data on agricultural use of arbuscular mycorrhizal fungi(AMF) in salt accumulated plastic film house soil by evaluating the density of AMF spores in plastic film house in Yeong Nam area and surface sterility condition, germination rate of AMF spores, and hyphal growth in vitro. The density of AMF spores in plastic film house soils was highest in the site of water melon, and those of cucumber, melon, hot pepper sites were followed in order. The number of AMF was in the range of 101-207 per 100 g dry soil. With decreasing the ratio of bacteria to fungi(B/F), the population density of AMF was increased, and available $P_2O_5$ content of soil was significantly correlated to the population densities of AMF($r=0.416^*$). The surface sterility rate and spore germination of AMF isolated in plastic film house soil were more than 50% in 2% chloramin T and 2% chloramin T + antibiotic and 0.5% NaOCl treatments. The germination rate of Gigaspora margarita in the range of initial pH 5~9 of the medium was more than 56%. Hyphal growth was increased as pH of the medium increased. However the germination rate of Acaulospora spinosa was highest in the medium of pH 9, and hyphal growth in vitro was poor and not related to pH of the medium.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1007-1009
• /
• 2004

We investigated the electro-optical(EO) performances of the super twisted nematic liquid crystal display(STN-LCD) on the polyimide(PI) surface with polymer film using rubbing and photoalignment method. Monodomain alignment of the plastic STN-LCD can be observed. A faster response time for the photoaligned plastic STN-LCD on the polyimide(PI) surfaces can be achieved than rubbingaligned plastic STN-LCD.

• Proceedings of the Ginseng society Conference
• /
• 1974.09a
• /
• pp.137-146
• /
• 1974

This experiment was on the purpose to study the effects of different shading of Mulching treatments on the quality and yield of ginseng root. This experiment were conducted at Mei-Feng for one year, from July, 1972 to July, 1973. The variety been used was introduced Korea Panax ginsvng. Three different Shading of Mulching treatments have been studied. The results were summerized as follows: 1. The growth of ginseng plant is good under around 4,300 Lux of light intensity. Fig . showed the shadow treatment of straw had a better effect than that of black or grey plastic film. The differences between treatments were significant. 2. The adequate soil temperature for ginseng culture was in the range of $16-18^{\circ}C$. Fig 2. showed that there were significant differences among treatments, of which the straw shadow treatment had the best effect. 3. The growth of ginseng plant was greatly affected wth various shadow treatments. Fig 1. showed both straw and black plastic film treatments had a better effects on growth of stem, leaf area and leaf numbers. 4. Fig. 2. 3. 4. 5 indicated there were distingished differences among all treatments. The straw and black plastics film mulching treatments had a better effects on root length, root diameter, root weight and leaf weight than the grey plastic film. 5. The amount of plant alkaloids and panacene content had related to the shadow treatment, as showed in Fig. 6 and 7 that straw shadow treatment had greatly increased the procuction of plant alkaloids and panacene content. 6. The quality and yield of roots of ginseng greatly affected by different shading of mulching treatments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1604-1607
• /
• 2009

YAG laser crystallization of Si-based thin film deposited on plastic substrate has been studied. The Si-based thin films as crystallization precursor are with varied hydrogen (H) content. The effect of the H content on the crystallinity of the resulted poly-Si film has been investigated. The experimental results of the poly-Si crystallized by doublefrequency YAG laser shows that the initial dehydrogenation process could be left out if ${\mu}c$-Si was adopted as the crystallization precursor. The YAG laser annealing condition on plastic substrate and the crystallization results have been discussed in the paper.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.36-37
• /
• 1998

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.46-46
• /
• 2019

The experiments were performed in the Jinan (elevation: 300 meters above sea level), Jeollabuk-do. Seedlings (n = 63 per $3.3m^2$) of ginseng cultivar (Cheonpung, Yeonpung) were planted on April 10, 2015. Shading material of plastic film house was blue-white film. Before the Planting seedling, silicate (3 kg/10 a) or chitosan (40 kg/10 a) was fertilized and foliar sprayed on the leaves 1000 times dilution solution once a month from May to September every year. The growth results of 5-year old ginseng surveyed in 2018 are as follows. The average air temperature in the plastic film house was the highest at $26.6^{\circ}C$ and $26.5^{\circ}C$ in July and August, respectively, and the highest temperature was $40.5^{\circ}C$ in July. The maximum daily temperature of $35^{\circ}C$ or more was 30 days, with the average soil temperature being $24.9^{\circ}C$ in August. The chemical properties of the test soil are as follows. pH was 6.4~6.9 level and EC was 0.35~0.46 dS/m. The organic matter content was 33.5~41.4 g/kg, and available-P content was 251.9~306.8 mg/kg. Exchangeable cations contents, such as K, Ca and Mg were all the appropriate ranges. The soil microbial density surveyed by the dilution plate method was 10~50 times higher than that of control (Non-treatment) and actinomycete density was 3~6 times higher. Pathogens of the genus Fusarium by Metagenome analysis decreased 91.3% and 68.2% respectively in the foliar sprayed of chitosan and soluble-silicate. The light intensity (PAR) in the blue-white film plastic film house gradually increased until July and then decereased, with the average of light intensity in March-October was $120.3umol/m^2/s$. The growth of aerial parts such as plant height and stem length was better than non-sprayed group in silicate or chitosan treatments and Yeonpung cultivar was superior to the Cheonpung cultivar. The SPAD value was higher in Yeonpung cultivar foliar sprayed with soluble-silicate. The growth of underground parts such as root length and taproot length were better in chitosan and soluble-silicate treatment than control, especially in Yeonpung cultivar foliar sprayed with chitosan was good in taproot length and taproot diameter, and fresh weight of root was 60.1 g. Ginsenoside contents were 24.9 mg/g and 22.4 mg/g, in the Cheonpung cultivar foliar sprayed with soluble-silicate or chitosan respectively, 28% and 15% higher than control (19.5 mg/g). The incidence of disease by Alteraria panax and Botrytis cinerea was 3~9% and 4~9%, respectively. High temperature damage rate was 3~5%.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.734-737
• /
• 2001

A study was conducted in order to remove PVC from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC. By using the improved air table, the PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with the content of PVC in PE 1% or less. The detail of the separation condition and result will be discussed in this paper.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.372-376
• /
• 1999

The deposited Cu film on the ferrite magnet was more deposited comparing with that on the plastic magnet. The Cu film became thicker on the S pole comparing with that on the N pole in the both of magnets. The thickness and texture coefficient of deposited copper film affected with direction of line of magnetic force. The difference of pole had little or no effect to the texture coefficient of deposited nickel film. The reaction rate on ferrite magnet and S pole was faster comparing with that on plastic magnet and N pole.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1191-1196
• /
• 2006

Analysis of drying characteristics has been carried out with one-dimensional model in the dryer using the principle of the refraction of radiation. The dryer is composed of hot water tank, a plastic film conveyer belt, drying material, etc. The model considers the conduction and radiation within the plastic film and drying material. The film is semitransparent to radiation and the drying material is assumed to be semitransparent or opaque to radiation. The results shows that the effect of radiative transfer on the drying rate is relatively large when the thickness of drying material is small and the water temperature is high. When the material is thin, the drying rate by only conduction is also enhanced so that drying time can considerably be reduced.