• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.137-140
• /
• 2005

Organic light emitting transistors (OLET) which are vertically combined with the organic static induction transistor (OSIT) and organic light emitting diode (OLED) are fabricated and the device characteristics are investigated. High luminance modulations by relatively low gate voltages are obtained. In order to realize the flexible electronic circuits and displays, we have fabricated OSIT on plastic substrates. The OSIT fabricated on plastic substrate show almost same characteristics comparing with those of nonflexible OSIT on glass substrate. The OLET described here is a suitable element for flexible sheet displays.

• Journal of Information Display
• /
• v.4 no.3
• /
• pp.17-21
• /
• 2003

A low temperature doping technique to be applied in poly-Si TFTs on plastic substrates was investigated. Heavily-doped amorphous silicon layers were deposited on poly-Si and the dopant atoms were driven in by subsequent excimer laser annealing. The entire process was carried out under a substrate temperature of 120 $^{\circ}C$, and a sheet resistance of as low as 300 ${\Omega}$/sq. was obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.634-638
• /
• 2003

We reported the a-Si crystallization using a XeCl excimer laser annealing on the plastic substrate. The poly-Si film is able to grow in the low temperature and light substrate like a plastic. For the preparation of sample, substrate is cleaned by organic liquids. The film of $CeO_{2}$ layer as the buffer layer was grown by sputtering methods. After a-Si film deposition using ICPCVD, the film was crystallized by XeCl excimer laser. In this paper, we present the crystallization properties of a-Si on the plastic substrate

• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.06a
• /
• pp.89-90
• /
• 2002

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.38-42
• /
• 2001

Thin films of $In_2O_3-SnO_2$(ITO), $SnO_2$, and $SiO_2$ were prepared on the PET substrate by DC magnetron roll sputtering. 135 nm thick ITO film on $SiO_2$/PET substrate has sheet resistance as low as 55 ${\Omega}/square$ and transmittance as high as 85%. $H_2O$gas permeation through the film was 0.35 g/$m^2$ in a day. These properties are enough on optical film for the plastic LCD substrate or touch panel. Both refractive index and sheet resistance of ITO was found to be very sensitive to $O_2$ flow rate. Oxygen flow conditions have been optimized from 4 to 5 SCCM at $10^{-3}$torr. It is also shown that both thickness of $SnO_2$ and refractive index of $SiO_2$ decrease as $O_2$ flow rate increases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.633-636
• /
• 2006

GE has developed a plastic substrate technology comprised of a superior high-heat polycarbonate substrate film and a unique transparent coating package that provides the ultrahigh barrier to moisture and oxygen, and chemical resistance to solvents used in device fabrication. This contribution will update recent progresses made at GEFlexible Ultra-high Gas Barrier Substrate for Organic Electronics on ultra-high barrier coated plastic substrate, both in batch mode and in roll-to-roll mode

• ETRI Journal
• /
• v.34 no.6
• /
• pp.970-973
• /
• 2012

In this letter, we report on the development progress of a pressure control organic vapor deposition (PCOVD) technology used to design and build a large area deposition system. We also investigate the growth characteristics of a pentacene thin film by PCOVD. Using the PCOVD method, the mobility and on/off current ratio of an organic thin-film transistor (OTFT) on a plastic substrate are $0.1cm^2/Vs$ and $10^6$, respectively. The developed OTFT can be applied to a flexible display on a plastic substrate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.91-94
• /
• 2004

We report on the opto-electronic properties of red, green, and blue poly (fluorene) co-polymer light-emitting devices (PLEDs) fabricated on a flexible plastic substrate. The plastic substrate used has a multi-layer structure with water vapor and oxygen transmission rates of less than $10^{-5}$ g/$cm^2$-day-atm and $10^{-7}$ cc/$cm^2$-day-atm, respectively. We obtained a wide range of color gamut and a maximum emission efficiency of 0.7, 10, and 1.7 cd/A for red, green, and blue PLEDs, respectively. Finally, a simple equivalent circuit model is proposed to simulate PLED current density-voltage characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1170-1173
• /
• 2006

Active layer patterned OTFT was obtained on a plastic substrate using the optimal growth condition of pentancene thin films as active layer and parylene thin films as passivation layer. Tranditional photolithography was performed to use a dry etch to pattern the material stack. The pentacene thin film and parylene thin film were deposited onto a plastic substrate using PC-OVD and CVD, respectively.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.543-544
• /
• 2006

Pentacene thin film transistors fabricated without photolithographic patterning were fabricated on the plastic substrates. Both the organic/inorganic thin films and metallic electrode were patterned by shifting the position of the shadow mask which accompanies the substrate throughout the deposition process. By using an optically transparent zirconium oxide ($ZrO_2$) as a gate insulator and octadecyltrimethoxysilane (OTMS) as an organic molecule for self-assembled monolayer (SAM) to increase the adhesion between the plastic substrate and gate insulator and the mobility with surface treatment, high-performance transistor with field effect mobility $.66\;cm^2$/V s and $I_{on}/I_{off}$>$10^5$ was formed on the plastic substrate. This technique will be applicable to all structure deposited at low temperature and suitable for an easy process for flexible display.