• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.408-411
• /
• 2003

Al doped Zinc Oxide(ZnO:Al) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure, discharge power and doping amounts of Al on the electrical, optical and morphological properties were investigated experimentally. The effect of bias voltage on the electrical properties of ZnO thin film were also studied. Films with lowest resistivity of $5.4{\times}10^{-4}\;{\Omega}-cm$ have been achieved in case of films deposited at 1mtorr, $400^{\circ}C$ with a substrate bias of +10V for 840nm in film thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.413-416
• /
• 2004

In this study, zinc oxide(ZnO) having large misfit(18.2%) with sapphire was tried to be grown on very thin nitride buffer layers. For the creation of various kinds of nitride buffer layer, sapphire surface was modified by an irradiation of nitrogen ion beam with low energy generated from stationary plasma thruster(SPT) at room temperature. After the irradiation of ion beam, Al-N and Al-O-N bonding was identified to be formed as nitride buffet layers. Surface morphology was measured by AFM and then ZnO growth was followed by pulsed laser deposition(PLD). Their properties are analyzed by XRD, AFM, TEM, and PL. We observed that surface morphology was improved and deep level emission related to defects was almost vanished in PL spectra from the ZnO grown on nitride buffer layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.176.1-176.1
• /
• 2013

TCO (Transparent Conductive Oxide)는 투명 전도성 산화물 높은 투과율과 낮은 비저항 가지고 있어서 최근 사용된 평판디스플레이 LCD(liquid crystal display), PDP (Plasma Display Panel), OLED (Organic Light Emitting Display) 에 많이 사용되고 있다. 현재 양산화 되고 있는 ITO (Indium tin Oxide)는 좋은 전도율과 높은 투과율로서 가장 많이 쓰인다. 하지만 ITO중에 Indium Oxide는 치명적인 독성을 가지고 있으며 In의 저장량이 적어 시간이 갈수록 가격이 비싸지는 등 여러 가지 단점을 가지고 있다. 그것에 비해 AZO (aluminum-doped zinc oxide)는 독성이 없고 가격도 저렴하여 ITO의 단점을 보완 할 수 있는 물질이다. AZO 증착은 현재 sol-gel, CVD(chemical vapor deposition), Sputter, 등으로 사용되고 있으며 현재 많은 연구가 진행되고 있다. 본 실험에서는 PEN 기판을 사용하였으며, 플라즈마의 열적 데미지로 인한 기판의 변형 등 여러 가지 문제를 해결하기 위하여 박막의 열적 변형이 적고, 고밀도 플라즈마로 양질의 박막 증착이 가능한 FTS (Facing Target Sputtering)방법을 사용하여 AZO박막을 증착시키고 구조적, 전기적, 광학적인 특성을 평가 하였다. 측정 분석 결과 AZO는 가시광 영역에 높은 투과율이 요구되는 Flexible display 표시장치와 OLED, PDP, 유기태양전지 등 많은 영역에 사용이 가능 할 것이라 사료된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.939-942
• /
• 2004

Al doped Zinc Oxide(ZnO:Al) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors were Prepared by using the capacitively coupled RF magnetron sputtering method. In this paper the effect of RF discharge power on the electrical, optical and structural properties were investigated experimentally. The results show that the structural and electrical properties of the film are highly affected by the variation of RF discharge power. The optimum growth conditions were obtained for films doped with 2 wt% of $Al_2O_3$ and 200 W in RF discharge power, which exhibit a resistivity of $10.4{\times}10^{-4}{\Omega}-cm$ associated with a transmittance of 89.66 % for 1000nm in films thickness in the wavelength range of the visible spectrum.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.5-13
• /
• 2020

The identify of biomarkers in living tissues is useful to understand the characteristics and functions of the cells. Proteins such as protein gene product 9.5, promyelocytic leukemia zinc finger, NANOG, and stage-specific embryonic antigen-1 have been identified as markers for porcine undifferentiated spermatogonia. In this study, the expression of insulin-like growth factor binding proteins (IGFBPs), a newly discovered porcine spermatogonia marker and pregnancy-associated plasma protein-A (PAPP-A), a protein regulator of IGFBPs, were characterized in 5-day-old porcine testis. To analyze the function of IGFBPs, RT-PCR was performed. IGFBP 2, 3, 4, and 6 were detected in porcine spermatogonia and PAPP-A was detected in basement regions in 5day old porcine seminiferous tubules. PAPP-A was not expressed in spermatogonia, but it was expressed in Sertoli cells. These results suggest that the expression of PAPP-A protein in Sertoli cells may regulate the development and differentiation of testicular cells through the IGF axis in porcine neonatal testis.

• Restorative Dentistry and Endodontics
• /
• v.39 no.2
• /
• pp.89-94
• /
• 2014

Objectives: The aim of this study was to evaluate the cytotoxicity, setting time and compressive strength of MTA and two novel tricalcium silicate-based endodontic materials, Bioaggregate (BA) and Biodentine (BD). Materials and Methods: Cytotoxicity was evaluated by using a 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-((phenylamino)carbonyl)-2H-tetrazolium hydroxide (XTT) assay. Measurements of 9 heavy metals (arsenic, cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc) were performed by inductively coupled plasma-mass spectrometry (ICP-MS) of leachates obtained by soaking the materials in distilled water. Setting time and compressive strength tests were performed following ISO requirements. Results: BA had comparable cell viability to MTA, whereas the cell viability of BD was significantly lower than that of MTA. The ICP-MS analysis revealed that BD released significantly higher amount of 5 heavy metals (arsenic, copper, iron, manganese, and zinc) than MTA and BA. The setting time of BD was significantly shorter than that of MTA and BA, and the compressive strength of BA was significantly lower than that of MTA and BD. Conclusions: BA and BD were biocompatible, and they did not show any cytotoxic effects on human periodontal ligament fibroblasts. BA showed comparable cytotoxicity to MTA but inferior physical properties. BD had somewhat higher cytotoxicity but superior physical properties than MTA.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.205-210
• /
• 2005

The content of the trace metals in the cultured and wild fishes were determined. The tested fishes were genuin porgy (Pagrus major) and black porgy (Acanthopogrus schlegeli). The samples of the cultured and wild fishes were collected from slices of raw fish in shops, during 2003 to 2004. The samples were digested with acids, then analyzed by ICP (inductively Coupled plasma Spectrometer) and AAS (Automic Absorption Spectrometer) for the content of lead (Pb), cadmium (Cd), arsenic (As), copper (Cu), manganese (Mn) and zinc (Zn). The content of mercury (Hg) was determined using mercury analyzer. The mean contents of trace metals in cultured and wild fish was 0.031,0.047mg/kg far total-mercury,0.321,0.407 for Pb, 0.048,0.063 for Cd, 1.006, 1.132 for As, 0.467,0.806 for Cu, 0.233, 0.293 for Cr, 9.69, 12.20 for Zn,0.798, 0.624 mg/kg far Mn, respectively. The content of all the trace metals except manganese in wild fish was more than that in cultured fish. The highest level of total-mercury, lead, cadmium, zinc, chromium and arsenic in the samples analyzed were all below the quarantine limit of Korean regulation and guideline established by the U.S. Food and Drug Administration f3r human consumption. The level of the trace metals in the samples was negligible, which could be endogenous. Our data obtained in this study showed that the average weekly intakes of lead, cadmium and mercury from cultured and wild fishes takes about $6\∼13\%$ of Un(Provisional Tolerance Weekley Intakes) that FAO/WHO Joint Food Additive and Contaminants Committee has set to evaluate their safeties.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.420-425
• /
• 2016

The present study aimed to calcium (Ca), iron (Fe) and zinc (Zn) contents were compared with reference values indicated on the nutrition label of nutrition emphasized food. Also, this paper will briefly review and evaluate what is currently known about Fe-Zn and Ca-Fe interaction. Ca, Fe or Zn-emphasized product, including cereal, snack, soy milk, chocolate product, other cocoa product, sugars product, beverage and tea were analyzed. The contents of Ca, Fe, and Zn in samples after dry-ashing were examined by ICP. The measured Ca (n = 42), Fe (n = 13), Zn (n = 6) values were ranged 87~176%, 98~167%, 98~275% of reference value indicated product, respectively. All samples were ranged more than 80% of the reference value, which were complied with food regulation. High intake of Ca has been shown to adversely affect Fe absorption and the negative effect of Fe on Zn absorption is well known. Therefore, it is important to consider Ca-Fe and Fe-Zn absorption interaction, when Ca, Fe or Zn-emphasized product produce and nutrition labeling policy should be managed regularly with continuous monitoring.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.398-407
• /
• 2020

Objective: The Yip1 domain family (YIPF) proteins were proposed to function in endoplasmic reticulum (ER) to Golgi transport and maintenance of the morphology of the Golgi, which were homologues of yeast Yip1p and Yif1p. YIPF3, the member 3 of YIPF family was a homolog of Yif1p. The aim of present study was to investigate the expression and regulation mechanism of porcine YIPF3. Methods: Quantitative realtime polymerase chain reaction (qPCR) was used to analyze porcine YIPF3 mRNA expression pattern in different tissues and pig kidney epithelial (PK15) cells stimulated by polyinosine-polycytidylic acid (poly [I:C]). Site-directed mutations combined with dual luciferase reporter assays and electrophoretic mobility shift assay (EMSA) were employed to reveal transcription regulation mechanism of porcine YIPF3. Results: Results showed that the mRNA of porcine YIPF3 (pYIPF3) was widely expressed with the highest levels in lymph and lung followed by spleen and liver, while weak in heart and skeletal muscle. Subcellular localization results indicated that it expressed in Golgi apparatus and plasma membranes. Upon stimulation with poly (I:C), the level of this gene was dramatically up-regulated in a time- and concentration-dependent manner. pYIPF3 core promoter region harbored three cis-acting elements which were bound by ETS proto-oncogene 2 (ETS2), zinc finger and BTB domain containing 4 (ZBTB4), and zinc finger and BTB domain containing 14 (ZBTB14), respectively. In which, ETS2 and ZBTB4 both promoted pYIPF3 transcription activity while ZBTB14 inhibited it, and these three transcription factors all played important regulation roles in tumorigenesis and apoptosis. Conclusion: The pYIPF3 mRNA expression was regulated by ETS2, ZBTB4, and ZBTB14, and its higher expression in immune organs might contribute to enhancing ER to Golgi transport of proteins, thus adapting to the immune response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.709-714
• /
• 2018

This study researched the reasons for changing polarity in accordance with junction properties in an interface of semiconductors. The contact properties of semiconductors are related to the effect of the semiconductor's device. Therefore, it is an important factor for understanding the junction characteristics in the semiconductor to increase the efficiency of devices. For generation of various junction properties, carbon-doped silicon oxide (SiOC) was deposited with various argon (Ar) gas flow rates, and the characteristics of the SiOC was varied based on the polarity in accordance with the Ar gas flows. Tin-doped zinc oxide (ZTO) as the conductor was deposited on the SiOC as an insulator to research the conductivity. The properties of the SiOC were determined from the formation of a depletion layer by the ionization reaction with various Ar gas flow rates due to the plasma energy. Schottky contact was good in the condition of the depletion layer, with a high potential barrier between the silicon (Si) wafer and the SiOC. The rate of ionization reactions increased when increasing the Ar gas flow rate, and then the potential barrier of the depletion layer was also increased owing to deficient ions from electron-hole recombination at the junction. The dielectric properties of the depletion layer changed to the properties of an insulator, which is favorable for Schottky contact. When the ZTO was deposited on the SiOC with Schottky contact, the stability of the ZTO was improved by the ionic recombination at the interface between the SiOC and the ZTO. The conductivity of ZTO/SiOC was also increased on SiOC film with ideal Schottky contact, in spite of the decreasing charge carriers. It increases the demand on the Schottky contact to improve the thin semiconductor device, and this study confirmed a high-performance device owing to Schottky contact in a low current system. Finally, the amount of current increased in the device owing to ideal Schottky contact.