• 한국환경과학회지
• /
• 제25권6호
• /
• pp.749-756
• /
• 2016

This study shows how the growth of the top part of plants cultivated using the single-row strawberry method, with 12 cm plant spacing, as well as that of plants cultivated through conventional planting, is characterized by the presence of many leaves in the first flower cluster harvest. The leaf area and crown diameter were the largest in the 12 cm spacing method. The hight top fresh weight (59.2 g) was detected wen the 12 cm spacing method was used followed by conventional planting and, 9 cm and 6 cm spacing method. The K and Ca contents in the first flower cluster were the highest when the 12 cm spacing method (2.0% and 2.1%, respectively) and conventional planting, (0.42% and 0.86%, respectively) were used, and these values were significantly higher than the K and Ca contents obtained using the other two methods. The N, P, Mg, Fe, and B contents show no significant differences across the planting methods. The sugar content of the first flower cluster fruits was the highest when the 12 cm spacing method was used, while the sugar content of the fourth flower cluster fruits was highest after conventional planting. Firmness was the highest in the first, third, and fourth flower clusters after conventional planting, while no significant differences were observed for the 6 cm, 9 cm, and 12 cm spacing methods. A yield of 25 g or above during November to December was observed to be the highest when the 12 cm spacing method was used, while a yield of 10-16 g was the highest when both the 9 cm and 12 cm spacing methods werw used. The yield of products in January-April was the highest when the 12 cm spacing and conventional planting methods were used, and total product yield was also the highest for these methods. A significant portion of non-marketable products (39 g) was obtained when the conventional planting method was used.

• 한국자원식물학회지
• /
• 제17권2호
• /
• pp.102-106
• /
• 2004

남부 지방의 답전작 재배에 적합한 왕골의 재식밀도를 구명코자 다수성 품종으로 선발된 광산조생종을 공시하여 시험했다. 그 결과, 경장, 분얼수, 출수된 경수, 경태 등의 수량구성형 질은 18${\times}$18 cm 이식구에서 가장 우수하였고, 건피수량, 건수 수량에서도 18${\times}$18 cm 이식구에서 가장 우수하였다.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.115-122
• /
• 2001

An impact-type seed-metering device was developed for the planting of rice-pellets. In this study, new design of pellet-metering device focused on simplicity and precision seeding for the planting of rice-seed pellets. In addition of seed-metering device, several devices were also developed such as seed-guiding device, seed-supplying tube and furrow opener for precision pellet planting. Field test was conducted to estimate the planting performance of the developed metering device. As a cam rotates, the impact bar of the metering device pushes a rice-seed pellet so that the seed can be discharged from the seed-supplying tube in the impact-type seed-metering device. Results of the tests showed that mean seeding spacing was 12cm at the traveling speed of 1.0m/s, corresponding to a target spacing for planting of rice-seed pellets. Also, both miss-seeded rate and damaged-seed rate were less than 2.0%, indicating acceptable levels for the precision planting. The developed mechanism of the impact-type metering device can be directly applied to the design of metering devices for the precision pellet planting of other crops.

• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.495-502
• /
• 2001

Upright positioning of garlic cloves has been considered as an essential process for mechanical planting because positioning affects the quality and yield of garlic production. Due to the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual. Manual planting requires intensive labors and high production cost. The overall Boal of this research was to develop a garlic clove planter which maintains a garlic clone upright. Specific objective was investigating planting condition and physical properties of garlic clove. The results were summarized as fellows : Based on the survey results, a garlic clove planter should have a planting capacity of at least 140 cloves in a pyung (3.3m$^2$) with the row spacing of 140mm and hill spacing of 120mm for a productive cultivation.

• 한국작물학회지
• /
• 제7권1호
• /
• pp.133-137
• /
• 1969

This experiment was conducted to determine the optimum row width and plant spacing within row under the tropical environment for a leading soybean variety Palmetto and it was carried out at Eakmat Experiment Station in Vietnam. The experiments were arranged in a split plot design with four replications and the test was repeated twice in two years. Variations for seed yield due to the distance between rows were significant at 1 per cent level in 1967 test(dry season growing) and at 5 per cent level in 1968 test. Significant differences for plant height, lodging, maturity, number of branches per plant, and number of pods per plant due to the row width were not found in both tests, while significant differences in difference spacing within row was found in all traits studied. Interaction between width of row and spacing within row for seed yield and plant height were found at five percent level in 1967 test. These results indicate that close planting may increase in seed yield and plant height in both seasons, and decrease in loadging. From these studies, one could be understood that the plant population, particularly in dry season, plays decisive roles on seed yield in soybean culture, and the maximum plant height and minimum value of lodging index were also observed in closest spacing plots. The highest soybean yield in late planting would be expected by a combinations of 30 cm(between rows)${\times}$5cm(between hills) plot, while 40cm ${\times}$ 5cm planting method would be suggested for rainy season growing. Highest seed yield was obtained at closet spacing in both dry and rainy season, and these results led to drilling method in seeding where about 20 seeds per meter of row could be recommended. Besides the seed yield, the close planting may produce some advantages, such as increase plant height and decrease lodging, weeds and erosion of surface soil.

• 한국작물학회지
• /
• 제46권5호
• /
• pp.407-410
• /
• 2001

This study was conducted to determine the optimal planting distance in cultivation of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher). Plug seedlings were planted with 6 different plant densities of 80 $\times$ 60, 80 $\times$ 50, 70 $\times$ 50, 70 $\times$ 45, 70 $\times$ 40 and 60 $\times$ 45 cm. The plant height and the petiole length were increased with increasing the planting distance. The tallest plant height of yacon was 165.4cm with the plant density of 80 $\times$ 60 cm. However, branch number per plant, leaf number on main stem and stem diameter were not significantly difference among planting densities. Tuberous root was harvested 31.42 tons/ha in 70 $\times$ 50 cm spacing. The ratio of heavier tuberous roots than 200 g to total tuberous roots decreased significantly according to increase of planting density. Fresh weights of shoot and root, contain the crown bud, were decreased, as planting distance was shorter. Tuberous root number was fewer but its weight was heavier in wide planting than in dense planting. We think that optimal planting density is about 30,000 plants/ha, if it were to be 70 cm row spacing, intrarow spacing should calculate about 47cm.

• 한국작물학회지
• /
• 제63권4호
• /
• pp.378-383
• /
• 2018

본 연구는 건강 기능성 팥에 대한 소비자의 선호도가 높아지면서 수요와 재배면적이 점차 확대되고 있는 팥의 생산량 증대와 자급률 향상을 위한 체계적인 재배기술을 확립하기 위한 기초자료를 얻고자 기계화 수확에 적합한 넓은이랑 줄뿌림 재배시 재식밀도에 따른 생육 및 수량에 관한 연구를 수행하였다. 1. 경장은 주간거리가 짧아질수록 '아라리' 품종은 길어지는 경향을 보였으나, '홍언' 품종에서는 대체적으로 짧아지는 경향으로 나타났으며, 경태와 분지수에서는 두 품종 모두 주간거리가 짧아질수록 가늘어지거나 적어지는 경향이 나타났다. 2. 착협고는 재식거리가 짧을수록 높아지는 경향이 나타났으며 '홍언'에서는 $30{\times}10cm$ 처리구에서 5.0 cm로, '아라리'에서는 $30{\times}10cm$과 $50{\times}10cm$ 처리구에서 8.8 cm로 가장 높았다. 3. 주당협수와 주당립수는는 두 품종 모두 재식거리가 길어질수록 많아지는 경향이 나타났으며, 백립중에서는 '홍언'에서는 재식밀도간의 차이가 나타났으나, '아라리' 에서는 재식밀도간 차이는 나타나지 않았다. 4. 수량성은 조간거리 40cm${\times}$주간거리 15 cm 처리구에서 두 품종 모두 (285, $374kg{\cdot}10a^{-1}$) 가장 높았다.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.364-367
• /
• 1999

Swordbean was recently introduced to Korea, and cultural technique for stable production, e.g. optimum seeding date and planting space, has not been established. This experiment was conducted to elucidate the changes of growth characteristics, yield components, and yield as affected by different seeding dates and planting spaces. Days to flowering was shortened by 4∼28 days as seeding was delayed. Stem diameter, number of pods per plant, number of seeds per plant, 100-seed weight, and seed yield tended to increase with delaying seeding up to 5 April and then to decrease with further delaying seeding. These results indicate that optimum seeding date of swordbean in unheated polyvinyl house would be early April. Although, the swordbean exhibited large increases in plant height, number of branches per plant, and stem diameter at the wider spacings, planting space could be decreased to the 60 cm plant-spacing and 30 cm row-spacing with no deleterious effect on yield.

• 한국약용작물학회지
• /
• 제5권1호
• /
• pp.67-71
• /
• 1997

시호(柴胡) 성력화(省力化) 재배기술(栽培技術) 개발(開發)의 일환(一環)으로 기계파종시(機械播種時) 재식밀도(栽植密度) 차이(差異)가 생육과6 수량에 미치는 영향을 검토(檢討)코자 시험(試驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 인력파종기(人力播種機)를 이용(利用)한 파종(播種) 소요시간(所票時間)은 손파종(播種)에 비하여 조간(條間) 20 및 30cm 처리(處理) 모두 96%의 파종노력을 절감(節減)할 수 있었다. 2. 재식밀도(栽植密度)에 따른 입모수(立毛數)는 조간(條間) 및 주간(株間)이 좁아질수록 많아졌으며, 경장(莖長) 및 마디 수는 차이가 없었다. 3. 주간거리(株間距離)가 좁아질수록 경태(莖太), 분기수(分枝數), 지상부종(地上部重), 규근경(圭根莖), 생체중(生體重) 및 건근중(乾根重)등이 감소(減少)되는 경향(傾向)이었다. 4. 근수량(根收量)은 조간(條間) 20cm 처리(處理)가 30cm보다 증가(增加)되었으며, 주간거리(株間距離)에 따라서는 조간(條間) 20 및 30cm 처리(處理) 모두 밀식(密植)일수록 증가(增加)되어 적정(適定) 재식밀도(栽植密度)는 조간(條間) 20cm에 조파(條播) 또는 주간(株間) 5cm로 나타났다. 5. 재식밀도(栽植密度)를 다르게 할 경우 입모수(立毛數)와 근수량(根收量)과는 정상관(正相關)을 보여 유의성(有意性)이 인정(認定) 되었다.

• Journal of Plant Biology
• /
• 제12권2호
• /
• pp.28-42
• /
• 1969

Field studies were conducted with the split plot design of 20 treatment with a combination of 4 levels of 3, 5, 7 and 9 plants per hill and 5 levels of 60, 80, 100, 120 and 140 hills per 3.3$m^2$ on non-, low- and high-salty areas. Rice variety, Kusabue was grown under jthe standard fertilization and cultivating. Investigation was made on the productive structure of plant population, leaf-area index, light intensity curve by stratum of crop population at the panicle differentiation stage. The competition density effect on the photosynthetic capacity was low as the salt concentration became higher. This seemed to suggest the possiblity of an increased yielding capacity by closer planting in the salty areas. The effect of an increased number of hills per unit area was greater than that of an increased unmber of plants per hill due to the total leaf area and space distribution of the actie assimilation parts of rice plants. The number of ppanicle per unit area in the salty areas were increased when the number of hill per 3.3$m^2$ increased over an increased number of plants per hill, and the panicle weight was reduced by close planting in the non-lalty area, while it was not reduced so much in the salty areas. The number of grains per panicle was significantly decreased by close planting in the salty areas as in the non-salty area, and ratio of matured grain was not decreased even by close planting in the salty areas, while it was significantly decreased by close planting in the non-salty area. An increase in the rice yield was possible by close planting and greatly related to leaf area index in the salty areas but not in the non-salty area. Increasing the number of hills per unit area showed greater effect on the increase of the rice yield than an increased number of plants per hill in the salty areas. Relationships between the growth characteristics and the rice population affected by plant spacing mode for maximum production were discussed.