• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.219-225
• /
• 2004

This study was conducted to evaluate growth and yield characteristics and the contribution to the yield according to the emergent sequence of tiller under two planting density $(60{\times}15\;cm,\;60{\times}25\;cm)$ in Coix lachryma-jobi L. var. mayuen Stapf. The average culm length and number of rachillas of $60{\times}25\;cm$ planting density were 20 cm shorter and 4.7 higher, respectively, whereas seed setting position of $60{\times}25\;cm$ planting density was 1.7 nodes lower compared with $60{\times}15\;cm$ planting density. Culm length and culm diameter of each tiller became shorter and thinner as the tiller emerged later. Length of rachillas was longer, number of grains was higher and ripening rate was also higher in $60{\times}25\;cm$ planting density than those of $60{\times}15\;cm$ planting density, whereas 100 grain weight in $60{\times}25\;cm$ planting density was lower by 0.5 g compared with $60{\times}15\;cm$ planting density. Length of rachillas and number of grains according to the emergent sequence of tiller were shown shorter and lower as the tiller emerged later. The highest number of bract was obtained from the main culm in both planting densities. 100 grain weight according to the emergent sequence of tiller became lower as the tiller emerged later in $60{\times}15\;cm$ planting density, but there was no clear tendency in $60{\times}25\;cm$ planting density. Among 8 tillers, 5th tiller and 4th tiller of main culm contributed 84.4% to the yield in $60{\times}15\;cm$ planting density, while it was 84.1% in $60{\times}25\;cm$ planting density. Analysis of path coefficient to grain yield showed that direct effect was the highest in the number of grain per tiller followed by in the 100 grain weight and in ripening rate.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.446-453
• /
• 1999

In this study, the effects of stand planting density on parameters of stand height and basal area growth models were investigated. We used the Korf equation as the base model in estimating the parameters of the growth models for cryptomeria plantation forest stands. Then, in order to investigate the effects of the change in plantation density on the parameter estimates, the "extra sums of square" principle, which provided a reasonable statistical procedure for a performance test, was used. The results of the test coincide with the understandings that stand height growth is not affected significantly by the planting density and the growth curves of stand basal area approaches a common asymptote regardless of the stand density for a given site. However, the shapes of the basal area growth curves were affected significantly by the planting density. Based on the results of the test, we developed a basal area growth model to account for the effects of initial planting density in cryptomeria plantation forest stands.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.407-410
• /
• 2001

This study was conducted to determine the optimal planting distance in cultivation of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher). Plug seedlings were planted with 6 different plant densities of 80 $\times$ 60, 80 $\times$ 50, 70 $\times$ 50, 70 $\times$ 45, 70 $\times$ 40 and 60 $\times$ 45 cm. The plant height and the petiole length were increased with increasing the planting distance. The tallest plant height of yacon was 165.4cm with the plant density of 80 $\times$ 60 cm. However, branch number per plant, leaf number on main stem and stem diameter were not significantly difference among planting densities. Tuberous root was harvested 31.42 tons/ha in 70 $\times$ 50 cm spacing. The ratio of heavier tuberous roots than 200 g to total tuberous roots decreased significantly according to increase of planting density. Fresh weights of shoot and root, contain the crown bud, were decreased, as planting distance was shorter. Tuberous root number was fewer but its weight was heavier in wide planting than in dense planting. We think that optimal planting density is about 30,000 plants/ha, if it were to be 70 cm row spacing, intrarow spacing should calculate about 47cm.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.3
• /
• pp.179-183
• /
• 2013

This study was carried out to investigate the variation of growth and yield using different planting densities and vinyl mulching in S. miltiorrhiza cultivation. Top plant growth was observed in the $30{\times}30cm$ planting density of S. miltiorrhiza;, plant height, leaves and branches were larger than in the other treatments. Root length, root diameter, and supporting roots of underground part were increased as planting density was wide, and dry root weight was increased in $30{\times}30cm$. However, yield was highest at 294 kg/10a in the planting density of $30{\times}10cm$. The use of 30-31cm white and black vinyl mulching had no significant effect on the plant height of S. miltiorrhiza, as compared to non-mulching. However, the highest volume of leaves and plant weight was observed in plants using 24.7 black vinyl mulching. Dry underground root weight was highest in black vinyl mulching at 21.7 g compared to 17.0 g for non-mulching. Yield per 10a increased by 28% using black vinyl mulching compared to non-mulching. Based on the results of this study, planting density of $30{\times}10cm$ and black vinyl mulching are the most suitable in the cultivation of S. miltiorrhiza.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.348-354
• /
• 2017

Agroforestry has been practiced in arid and semi-arid regions for the purposes of preventing desertification and to increase income for locals. However, the intended effects of such practices have been limited due to strong winds and aridity. This study undertook multi-year monitoring of the productivity of income crops associated with windbreak planting in a semi-arid region of Mongolia, and explored strategies of windbreak planning to enhance the multi-purpose effects of agroforestry practices. The tree crown density of windbreak planting was on average 40% in one year after planting and 65% 2-3 years after, and thereby windspeeds were reduced by about 30% and 54%, respectively. Average windspeed reductions at leeward distances from the windbreak planting were approximately 60% within 3H (H=tree height), 50% at 5H, and 42% at 7-9H, presenting a pattern in which the farther the distance the less the reduction in windspeeds. The windbreak planting increased crop productivity by up to 6.8 times, compared to the productivity absent of windbreaks. Increases in the crown density as stated above resulted in increases of crop productivity by up to 3.6 times. Based on such results, this study proposed a model of windbreak planning as a typical land-use system of border windbreak planting or alternate windbreak planting of combining trees and income crops. The model also included tree planting with a crown density of 60% and allocation of income crops within a leeward distance of 5 times the height of the trees to reduce windspeeds by about 50%. The results from this study are applicable to practicing agroforestry not only at the study site but also in other regions worldwide where strong winds and aridity are problematic.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.155-163
• /
• 2022

The tillering potential of panicle number type (PNT) rice greatly varies with planting density. Moreover, grain filling and ripening differ depending on the panicle position, which may further affect rice grain quality. The present study evaluated the grain quality of PNT rice sparsely planted to reduce production costs. The physicochemical characteristics of starch from the grains of PNT type rice 'Ilpum' planted at different densities (37, 50, 60, and 80 plants/3.3 m²) and at different positions of panicles (upper or lower on the culm) were determined. Overall, as the planting density decreased, the number of panicles increased but the starch content decreased, which further reduced the 1,000-grain weight. In particular, at the lowest density (37 plants/3.3 m²), protein content increased but particle size, enthalpy, and relative crystallinity decreased. The effects were more pronounced at lower than at upper panicle positions. These findings indicate that tillering potential differs with planting density, ultimately affecting the palatability of rice grains. Based on these findings, we propose restricting rice transplantation to a planting density of ≤37 plants/3.3 m² to achieve the best quality of grains at lower costs and with less labor.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.140-151
• /
• 2001

This study based on the theoretical understanding of multi-layer planting which have engineering, ecological and landscape benefits, was conducted to find out the status of multi-layer planting in the apartment and neighborhood park in Seoul. This study was also aimed to seek for the problematic matters, and suggest a solution on the current multi-layer planting. The results of this study were as follows; 1) Since landscape woody plants have been classified just as tree and shrub in Korea, the classification for the multi-layer planting has been unreasonable, and landscape woody plants might have been classified as tree, sub-tree and shrub, or upper, middle, and lower-layer, It could be defined that upper layer is over eight meters in full growth, middle over 3-8 meters and lower under 3 meters. 2) In apartments, the upper layer consisted of eighteen species, the middle and lower layer seven species each. In neighborhood parks, the upper layer consisted of fifteen species, and the middle and lower layer five species each. 3) In terms of planting year of the surveyed areas, there were no differences in the number of species when planting year of the apartment was divided into two groups, the first half(1900-1995) and the second(1996-2000). But, in terms of individual occupation, the percentage was decreased in upper layer, while there was increasing in middle and lower layer. 4) As the result of survey of multi-layered area, it appeared that apartment was shown 0.65 percent and neighborhood park 0.61 percent of the planted area, which was less than 1 percentage of landscape architecturally planted area. 5) In apartment, the number of individual in middle layers has been increased in the first half and the second, but with respect to the correlation with multi-layered area, the apartments had the "$\rho$=0.208", saying that increasing middle layer was scattered planting instead of multi-layered planting. 6) In planting at the apartments in Korea, the planting density was limited, because the layer division was restricted to only tree and shrub. On the contrary, it was divided into upper, middle and lower tree in Japan. Therefore, in Korea, it should be classified as the planting density by dividing into tree, sub-tree, and shrubs, or upper, middle and lower tree by the law. And, it should be considered that the multi-layered planting has a proper organic relation as well as the planting density.g density.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.317-326
• /
• 2002

This study was conducted to determine the optimum planting dates and density of one year old Bupleurum falcatum L. to improve its productivity and quality. Two cultivars of B. falcatum, originated from Jeongseon, Korea and Mishima, Japan were used. Some of the results obtained are as follows : Jeongseon cultivar showed less stem branches and shoot weight compared to Mishima. However, Jeongseon cultivar showed tall plant height, high root fresh and dry weight, and high levels of saikosaponin, but low saikosaponin content than that of Mishima. Both cultivars seeded on March 20 had long main root, big stem diameter, few stem branch, and high saikosaponin c content compared to those of late seeded one, April 30. Growth characteristics such as plant height, stem diameter, stem branch number, shoot weight, root diameter, root fresh and dry weight, and root branch number were increased in a low planting $density(30\;{\times}\;15cm)$, but the content of saikosaponin was not affected by planting density. Jeongseon and Mishima cultivars seeded on April 10 with $30\;{\times}\;15cm$ planting density and April 30 with $30\;{\times}\;10cm$ planting density contained the highest total saikosaponin levels, respectively. However, average root dry weight were not affected by planting time or density in both Bupleurum cultivars.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.281-290
• /
• 2020

The purpose of this study was to determine the optimal planting density for Zelokva serrata plantations. The study sites were located in Gyeongsan (GS) and Sunchang (SC), Korea. One-year-old, bare-root seedlings were planted at densities of 3,000; 5,000; 7,000; and 10,000 trees ha^-1 at the end of March 2015. We measured the root collar diameter and height each September from 2015 to 2019, and then calculated the H/D ratio and stem volume. The root collar diameter and height increased with increased planting density, and the stem volume was significantly higher at 10,000 trees ha^-1 than those at the other planting densities. Planting density did not affect the survival rate or H/D ratio. The root collar diameter, height, and stem volume were higher in GS than those in SC five years after planting. This study highlights that early growth performance was improved at increased planting densities at both sites. This study suggests that the initial planting density of 10,000 trees ha^-1 is suitable to improve the early growth performance of Z. serrata plantations, and that the improved growth performance at higher planting densities may be a silvicultural characteristic of Z. serrata.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.43-43
• /
• 2022

This study was carried out to investigate planting density suitable for technology that can produce a lot of small seed potatoes to machine sowing, the test material was made of less than 3 g of seed potatoes, and planting density was 75×10, 75×15, 75×20cm. the results of the test study were as follows, number of potatoes per 10a and number of potatoes under 50 g were the most 75×10cm in 2sowing methods. In view of these results, planting density suitable for technology that can produce a lot of small seed potatoes to machine sowing is judged 75×10cm in 2sowing methods. In order for this study to be applied in the agricultural field, cultivation management such as adequate water supply will be required.