• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.244-256
• /
• 2012

The anatomical characteristics of the ten Indonesian wood species (Gmelina, Jeunjing, Mangium, Durian, Gandaria, Jengkol, Kupa, Mangga, Nanaka and Rambutan) were investigated by optical microscopy. All the species were diffuse-porous with solitary and radial pore multiple. In Mangium, however, tangential pore multiple was observed as well. Tangential diameter of pore was larger than that of radial one except for Jeunjing and Nangka. Nangka showed the largest tangential diameter of pore among the species. Vessel number per $mm^2$ of Mangium, Gandaria and Kupa was higher than that of the other species. Especially Kupa showed highest vessel number. The tangential width of axial parenchyma cell in Gmelina, Mangium, Kupa and Mangga was larger than that of wood fiber, while the other species showed the opposite trend. Mangium was the largest in tangential width of axial parenchyma cell. Rays were homocellular composed only of procumbent cell in Gmelina, Jeunjing and Rambutan. Heterocellular rays composed of procumbent cells in the body and one row of upright and/or square in the margin are observed in Gandaria. Mangium, Durian, Jengkol, Kupa, Mangga and Nangkabody showed heterocellular rays composed of procumbent cells in the body and mostly 1~2 rows of upright and/or square cells in the margin. Crystals occurred in Durian, Gandaria, Jengkol, Jeunjing, Mangga and Rambutan and silica in Jeunjing and Mangga.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.467-476
• /
• 2014

The physical and mechanical characteristics of 10 Indonesian wood species were investigated. Mangium, Gandaria and Rambutan showed higher density. Mangium, Gandaria and Mangga appeared lower in shrinkage, and the ratio of tangential/radial was low in Albizia, Kupa and Mangga. The compression strength parallel to the grain and hardness were high in Mangium and Nangka. Gmelina, Mangium, Gandaria, Kupa, Nangka and Rambutan had valuable properties for commercial wood materials. Consequently, it is considered that the results of this study could be useful basic data for the improved use of planted and promising species in Indonesia.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.9-18
• /
• 2016

This study was performed to understand wood durability to climate deterioration of planted Indonesian wood specie such as Albizia, Gmelina, Mangium and Mindi. Wood samples were exposed to indoor and outdoor condition. $L^*a^*b^*$ and Color changes (${\Delta}E*ab$) were determined by a spectrophotometer. As a result, color of all samples was changed more markedly by ultraviolet radiation. In indoor test with UV, brightness of wood specimens from four species was not changed and all samples were changed into more reddish and yellowish. In accelerated weathering test, all samples were bleached and changed into more greenish and blueish. In outdoor test, brightness of wood specimens decreased in Albizia and Gmelina and increased in Mangium and Mindi. All wood specimens in outdoor test were changed into more greenish and blueish. Albizia and Gmleina woods showed greater color change than those of Mangium and Mindi. Especially, color change of wood samples might be influenced greatly by moisture. In conclusion, wood color changed into more clearly by UV radiation. Therefore, exposing woods to UV radiation could be one of reasonable methods to improve wood quality on visual characteristic.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.3
• /
• pp.222-237
• /
• 2023

Eucalyptus pellita is one of the fast-growing tree species and has become predominant in Indonesian forest plantations. Meanwhile, tree breeding programs with clone development are the best way to provide greater genetic advantages. A better understanding of genetic control on growth and basic density in E. pellita is important for increasing wood productivity and quality. In this study, growth characteristics (tree height, diameter, and volume), basic density and its genetic parameters (heritability, genetic gain and genetic correlation) were determined. The number of clones tested in both trials was 50, divided into 5 blocks, and 5 trees/plot. The results showed that there were significant differences in growth and basic density among clones. There was an interaction between genetics and the environment further indicating the existence of unstable clones. The high heritability was found in tree height (0.82-0.86), diameter (0.82-0.90), and basic density (0.91-0.93). This implies that E. pellita has good opportunities for genetic improvement to increase wood productivity and quality. In addition, the results of genetic correlations among growth characteristics (height, diameter, and volume) and basic density showed positive moderate to highly significant value. It is suggested that these characters may be used to the advantage of the breeder for bringing improvement in these traits simultaneously. Therefore, this study provides important information of the genetic improvement of wood quality in E. pellita in Indonesia.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.248-257
• /
• 2015

This research focused on the natural durability of twenty one lesser known tropical wood species planted in West Java, Indonesia against subterranean termite (Coptotermes curvignathus). It was observed that both heartwood and sapwood of Kiara payung (Filicium decipiens); heartwoods of Nangka (Arthocarpus heterophyllus), Mahoni (Swietenia macrophylla) and Simpur (Dillenia grandifolia); and sapwood of Bungur (Lagerstroemia speciosa) were rated as resistant (natural durability class II) according to Indonesian standard SNI 01.7207.2006 (BSN 2006). Both heartwood and sapwood of Salam (Syzigium polyanthum), Pasang (Lithocarpus sundaicus), Bisbul (Diospyros discolor), Rukam (Flacourtia rukam) and Trembesi (Samanea saman); heartwood of Puspa (Schima walichii), Bungur, Tanjung (Mimusops elangi) and Angsana (Pterocarpus indicus) were rated as moderately resistant (natural durability class III). Both heartwood and sapwood of Sungkai (Peronema canescens), Pine (Pinus merkusii), Mangium (Acacia mangium) and Afrika (Maesopsis eminii); sapwoods of Mahoni, Puspa and Tanjung were rated as poorly resistant (natural durability class IV). Both heartwood and sapwood of Agathis (Agathis dammara), Durian (Durio zibethinus), Ki sampang (Evodia latifolia) and Jabon (Anthocephalus cadamba); sapwoods of Nangka and Angsana were rated as very poorly resistant (natural durability class V). This reserach showed that woods with lower resistance against C. curvignathus attack (natural durability class IV and V) tend to have lower termite mortality values compared to woods with higher resistance against C. curvignathus attack (natural durability class II and III). Results of the study will provide some valuable information on termite resistance of twenty one lesser known tropical wood species planted in Indonesia.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.768-776
• /
• 2015

This study was performed to understand combustion properties four major Indonesian wood species such as Albizia, Gmelina, Mangium and Mindi were investigated by cone-calorimeter for better utilization of theses wood species. Heat release rate (HRR), total heat release (TSR), specific mass loss rate (SMLR), effective heat of combustion (EHC), time to ignition (TTI), flame time (FT), specific extinction area (SEA), smoke production rate (SPR) and CO compound production rate were measured. HRR, THR and FT were proportional to the density of woods. Albizia showed the highest HRR, while Mindi had the lowest HRR. For SPR, Albizia showed the highest value due to its higher SEA. On the other hand, Mindi had the lowest SPR due to a lower SEA value. The highest smoke emission was for Albizia at the beginning of combustion. After 300 seconds, smoke emission of Gmleina and Mangium was increased greatly. Mangium and Mindi showed the highest total carbon dioxide emission. Expecially, Gmelina released the highest carbon monoxide during the combustion period and presented three times higher $CO/CO_2$ ratio than those of other species due to incomplete combustion.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.323-337
• /
• 2018

Merkusii pine wood (Pinus merkusii) was extensively planted throughout Indonesia, where it is only indigenous in northern Sumatera, by the Dutch during colonial times. The demand for this wood species, especially in the domestic market, has increased notably, despite its limited durability regarding decay resistance. The purpose of this study was to investigate the occurrence of juvenile and mature wood on merkusii pine and to analyze its radial features from pith to bark based on density, shrinkage, static bending in modulus of rupture and modulus of elasticity, fiber length, microfibril angle, and durability. A segmented modeling approach was used to find the juvenile-mature transition. The graveyard test was performed to characterize the termite resistance from pith to bark of merkusii pine. The maturations were estimated to start at radial increments of 15 cm from the pith by fiber length and of 12 cm from the pith by microfibril angle. The projected figures for the proportion of juvenile wood at breast height were around 65%. The results also indicate that the pine wood was $0.52g/cm^3$ in density, 1.45 in coefficient of anisotropy, which indicates its good stability, 7597 MPa in modulus of elasticity, and 63 MPa in modulus of rupture. Natural durability against subterranean termite of the merkusii pine wood was rated to be grade 4 to 0 from pith to bark. However, after being treated by Entiblu and Enborer preservatives, its rating increased to grade 10 to 9.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.635-645
• /
• 2014

The anatomical characteristics of eight major wood species planted in Indonesia were investigated to provide valuable information for their effective utilization. The growth-ring boundaries of Damar and Sumatran pine were indistinct. Resin canal was found in Sumatran pine but it was not observed in Damar. Cupressoid pit and taxodioid pit were found in Damar and window-like pit and pinoid pit were observed in Sumatran pine. Tracheid length of Damar and Sumatran pine was shorter than $3,000{\mu}m$. There were uniseriate rays in Damar and Sumatran pine and fusiform ray in Sumatran pine. All the hardwood species observed in this study were diffuse-porous. They had different vessel groups, i.e., solitary pore in Afrika and Simpur Batu, pore cluster in Angsana and mostly 2-4 rows of radial pore multiple in Mahoni. Mindi and Trembesi had mostly 2-3 rows of radial pore multiple with paratracheal parenchyma as aliform and confluent types. Afrika, Mahoni and Simpur Batu showed heterocellular rays which composed of procumbent cells in the body and mostly 1-2 rows of upright and/or square cells in the margin. All ray cells procumbent was observed in Angsana, Mindi and Trembesi. The large rays commonly exceeding 1 mm in height and ray width of 3~6 cells were observed in Simpur Batu. The other five hardwood species showed ray width of 1~3 cells. Vessel number per $mm^2$ of Angsana and Simpur Batu was higher than those of the other hardwood species. The length of wood fiber and tracheid showed a tendency to increase from pith to bark. By IAWA list, fiber length of hardwoods was classified into long in Simpur Batu and short in Angsana and Trembesi.