• Nuclear Engineering and Technology
• /
• 제18권1호
• /
• pp.9-16
• /
• 1986

1984년 11월 14일 원자력 1호기에서 발생된 주급수 상실사고에 대한 계통의 열수력학적인 거동을 모의·해석하고, 발전소 실측자료와의 비교를 통하여 사용된 전산코드의 신뢰도를 평가하였다. 모의된 열수력학적 변수들은 발전소 실측자료와 비교적 잘 일치하였으나 원자로 트립시에 증기발생기 증기유량과 주 냉각재 계통 평균온도에 있어서 약간의 차이를 보였다. 이는 원자로 트립시 깎은 시간에 급격한 노심 출력의 감소로 인하여 열·수력학적 변수들에 큰 변화를 야기하여 발전소 실측자료가 과도상태에서의 불학실성을 내포하기 때문으로 예측되었다. 해석에 사용된 전산코드는 RELAP5/MOD1/CY018로부터 불합리한 oscillation을 일으키는 interphase drag 및 wall heat transfer model의 수정을 통하여 개발된 RELAP5/MOD1/NSC이다.

• 한국항만학회지
• /
• 제15권1호
• /
• pp.37-46
• /
• 2001

Fuzzy logic control(FLC) is composed of three parts : fuzzy rule-bases, membership functions, and scaling factors. Well-defined fuzzy rule-base should contain proper physical intuition on the plant, so are needed lots of experiences of the skillful expert. When membership functions are considered, some parameters on the memberships function such as function shape, support, allocation density should be selected well. The rule of scaling factors is 'scaling'(amplifying or reducing) for both input and output signals of the FLC to fit in the membership function support and to operate the plant intentionally. To get a better performance of the FLC, it is necessary to adjust the parameters of the FLC. In general, the adaptation of the scaling factors is the most effective adjustment scheme, compared with that of the fuzzy rule-base or membership function parameters. This study proposes the adaptation scheme of the scaling factors. When the adaptation is performed on-line, the stability of the adaptive FLC should be guaranteed. The stable FLC system can be designed with stability analysis in the sense of Lyapunov stability. To adapt the scaling factors for the error signals, the concept of the conventional MRAC would be introduced into slightly modified form. A tracking accuracy of the control system would be enhanced by the modified shape and support of the membership function. The simulation is achieved on the pilot plant with the hydraulic steering control of a UCT(Unmanned Container Transporter) of which modeling dynamics have lots of severe uncertainties and modeling errors.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• Journal of Crop Science and Biotechnology
• /
• 제11권3호
• /
• pp.215-222
• /
• 2008

Multilocation trials on 36 rice(Oryza sativa) genotypes of 3 different maturity groups were conducted at four different locations of Orissa for 3 years and 30 ragi(Eleusine coracana) genotypes of 2 different maturity groups were evaluated in three environmental conditions for 3 years. Grain yield data were subjected to stability analysis following linear regression model to estimate adaptability and stability parameters, i.e. b, and $S^2d$ Stability of performance of genotypes was also estimated by two other stability parameters viz., ecovalence W and AMMI stability value ASV. The rice and ragi genotypes of different duration groups showed wide variation in their mean yield, b, $S^2d$, W and ASV parameters. Seeds of the 36 rice and 30 ragi genotypes were treated with 500 and 100 ppm aqueous solution of maleic hydrazide(MH) for 24 hours, respectively to study MH-sensitivity. Sensitivity of genotypes to MH treatment was estimated in terms of seedling growth inhibition index(SGI). The rice and ragi genotypes showed wide differences in their MH-sensitivity in terms of SGI. Relationship of MH-sensitivity of genotypes with their yielding ability, adaptability and stability of performance was tested by contingency $x^2$ test. Low sensitivity of rice and ragi genotypes to MH in terms of SGI appeared to be good indicators of high yielding ability of genotypes. Also, low and high MH-sensitivity of genotypes would be a good indicator of better adaptability to rich and poor environments, respectively, in ragi but not in rice. Low MH-sensitivity of genotypes could be the good indicator of stability of yield performance in rice but not in ragi.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.139-146
• /
• 2013

A process diagnosis method for membrane water treatment plant was developed using a constant flux membrane fouling model. This diagnosis method can be applied to a real-field membrane-based water treatment plant as an early alarming system for membrane fouling. The constant flux membrane fouling model was based on the simplest equation form to describe change in trans-membrane pressure (TMP) during the filtration cycle from a literature. The model was verified using a pilot-scale microfiltraton (MF) plant with two commercial MF membrane modules (72 m2 of membrane area). The predicted TMP data were produced using the model, where the modeling parameters were obtained by the least square method using the early plant data and modeling equations. The diagnosis was carried out by comparing the predicted TMP data (as baseline) and real plant data. As a result of the case study, the diagnsis method worked pretty well to predict the early points where fouling started to occur.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.860-868
• /
• 2018

This article presents a new design of earthquake instrumentation that is suitable for quick decision-making after the seismic event at the nuclear power plant (NPP). The main objective of this work is to ensure more availability of the NPP by expediting walk-down period when the seismic wave is incident. In general, the decision-making to restart the NPP after the seismic event requires more than 1 month if an earthquake exceeds operating basis earthquake level. It affects to the plant availability significantly. Unnecessary shutdown can be skipped through quick assessments of operating basis earthquake, safe shutdown earthquake events, and damage status to structure, system, and components. Multidecision parameters such as cumulative absolute velocity, peak ground acceleration, Modified Mercalli Intensity Scale, floor response spectrum, and cumulative fatigue are discussed. The implementation scope on the field-programmable gate array platform of this work is limited to cumulative absolute velocity, peak ground acceleration, and Modified Mercalli Intensity. It can ensure better availability of the plant through integrated decision-making process by automatic assessment of NPP structure, system, and components.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1181-1188
• /
• 2021

When abnormal events occur in a nuclear power plant, operators must conduct appropriate abnormal operating procedures. It is burdensome though for operators to choose the appropriate procedure considering the numerous main plant parameters and hundreds of alarms that should be judged in a short time. Recently, various research has applied deep-learning algorithms to support this problem by classifying each abnormal condition with high accuracy. Most of these models are trained with simulator data because of a lack of plant data for abnormal states, and as such, developed models may not have tolerance for plant data in actual situations. In this study, two approaches are investigated for a deep-learning model trained with simulator data to overcome the performance degradation caused by noise in actual plant data. First, a preprocessing method using several filters was employed to smooth the test data noise, and second, a data augmentation method was applied to increase the acceptability of the untrained data. Results of this study confirm that the combination of these two approaches can enable high model performance even in the presence of noisy data as in real plants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.349-352
• /
• 1991

Fuzzy modelling is a useful method when the variation of plant dynamics is large. In the fuzzy modelling by parameter identification, a new method is proposed in the part of premise parameters identification and in expanding MISO system into MIMO system. Using the proposed method, a fuzzy model of the drum boiler of the thermal power plant can be derived. In addition, feedwater control of the drum by fuzzy controller using the fuzzy model, is simulated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1727-1732
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.441-446
• /
• 1996

A preliminary conceptual design of the DUPIC fuel fabrication plant with production capacity of 400 MTHE/yr is presented. Capital and operating costs are also included. The levelized unit fabrication cost (LUC) for a reference mode was estimated at $509/kgHE, and sensitivity of some variable parameters to this reference was analysed.