• Animal Bioscience
• /
• v.35 no.1
• /
• pp.29-38
• /
• 2022

Objective: The objective of this study was to compare the feeding value, meat nutrients and associative effects of a diet comprised of various corn silages inclusion with peanut vine or wheat straw in finishing beef cattle. Methods: One hundred and eighty Simmental crossbred beef steers were blocked and assigned to the follow treatments: i) whole plant corn silage-based diet (control, WPCS), ii) mixed forages-based diet (replacing a portion of corn silage with wheat straw, WPCSW), iii) corn stalklage-based diet (CS), and iv) sweet corn stalklage-based diet (SCS). Each group consisted of 5 repeated pens with 9 steers/pen. The diets were formulated to be isonitrogenous and isoenergetic with same forage to concentrate ratio. Experimental diets were fed for 90 d. Results: The effective ruminal degradability of dry matter and crude protein were highest for WPCS diet (p<0.05), for neutral detergent fiber was highest in SCS diet (p<0.05). The average daily gain was greater for cattle offered the WPCS diet, intermediate with WPCSW and SCS and lowest with CS (p<0.001). The concentration of non-esterified fatty acid in serum was higher for steers fed with CS and SCS diets than those offered WPCS and WPCSW steers (p<0.001). The treatments did not affect the general nutritional contents and amino acids composition of Longissimus dorsi of steers (p>0.05). Conclusion: The corn silage-based diet exhibited the highest feeding value. The sweet corn stalklage and wheat straw as an alternative to corn silage offered to beef cattle had limited influence on feeding value and meat nutrients. However, the value of a corn stalklage-based diet was relatively poor. To sum up, when the high quality forage resources, such as corn silage, are in short supply, or the growth rate of beef cattle decreases in the later finishing period, the sweet stalklage and wheat straw could be used as a cheaper alternative in feedlot cattle diet without sharp reducing economic benefits.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.141-148
• /
• 2022

In this study, the structural behavior of reinforced concrete members under simultaneous axial and blast loads was analyzed. Nonlinear dynamic analysis verification was performed using the experimental data of panels under fundamental blast load as well as those of reinforced concrete columns subjected to axial and blast loads. Because Autodyn is a program designed only for dynamic analysis, an analysis process is devised to simulate the initial stress state of members under static loads, such as axial loads. A total of 80 nonlinear dynamic finite element analysis procedures were conducted by selecting parameters corresponding to axial load ratios and scaled distances ranging 0%~70% and 1.1~2.0 (depending on the equivalent of TNT), respectively. The structural behavior was compared and analyzed with the corresponding degree of damage and maximum lateral displacement through the changes in axial load ratio and scaled distance. The results show that the maximum lateral displacement decreases due to the increase in column stiffness under axial loads. In view of the foregoing, the formulated analysis process is anticipated to be used in developing blast-resistant design models where structural behavior can be classified into three areas considering axial load ratios of 10%~30%, 30%~50%, and more than 50%.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.148-158
• /
• 2022

The electrochemical CO₂ reduction (ECR) to produce value-added fuels and chemicals using clean energy sources (like solar and wind) is a promising technology to neutralize the carbon cycle and reproduce the fuels. Presently, the ECR has been the most attractive route to produce carbon-building blocks that have growing global production and high market demand. The electrochemical CO₂ reduction could be extensively implemented if it produces valuable products at those costs which are financially competitive with the present market prices. Herein, the electrochemical conversion of CO₂ obtained from flue gases of a power plant to produce diesel and formic acid using a consistent techno-economic approach is presented. The first scenario analyzed the production of diesel fuel which was formed through Fischer-Tropsch processing of CO (obtained through electroreduction of CO₂) and hydrogen, while in the second scenario, direct electrochemical CO₂ reduction to formic acid was considered. As per the base case assumptions extracted from the previous outstanding research studies, both processes weren't competitive with the existing fuel prices, indicating that high electrochemical (EC) cell capital cost was the main limiting component. The diesel fuel production was predicted as the best route for the cost-effective production of fuels under conceivable optimistic case assumptions, and the formic acid was found to be costly in terms of stored energy contents and has a facile production mechanism at those costs which are financially competitive with its bulk market price. In both processes, the liquid product cost was greatly affected by the parameters affecting the EC cell capital expenses, such as cost concerning the electrode area, faradaic efficiency, and current density.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1610-1610
• /
• 2001

Microbiological examination of silage is of little value in gauging the outcome of silage, and so chemical analysis is more reliable and meaningful indicator of quality. On the other hand chemical assessments of the principal fermentation products provide an unequivocal basis on which to judge quality. Livestock require energy, protein, minerals and vitamins from their food. While fresh forages provide these essential items, conserved forages on the other hand may be deficient in one or more of them. The aim of the conservation process is to preserve as many of the original nutrients as possible, particularly energy and protein components (Woolford, 1984). Silage fermentation is important to preservation of forage with respect of feeding value and animal performance. Chemical and bacteriological changes in the silo during the fermentation process can affect adversely nutrient yield and quality (Moe and Carr, 1984). Many of the important chemical components of silage must be assayed in fresh or by extraction of the fresh material, since drying either by heat or lyophilisation, volatilises components such as acids or nitrogenous components, or effects conversion to other compounds (Abrams et al., 1987). Maize silage dorms the basis of winter rations for the vast majority of dairy and beef cattle production in Uruguay. Since nutrient intake, particularly energy, from forages is influenced by both voluntary dry matter intake and digestibility; there is a need for a rapid technique for predicting these parameters in farm advisory systems. Near Infrared Reflectance Spectroscopy (NIRS) is increasingly used as a rapid, accurate method of evaluating chemical constituents in cereals and dried forages. For many years NIRS was applied to assess chemical composition in dry materials (Norris et al., 1976, Flinn et al., 1992; Murray, 1993, De Boever et al., 1996, De la Roza et al., 1998). The objectives of this study were (1) to determine the potential of NIRS to assess the chemical composition of dried maize samples and (2) to attempt calibrations on undried samples either for farm advisory systems or for animal nutrition research purposes in Uruguay. NIRS were used to assess the chemical composition of whole - plant maize silage samples (Zea mays, L). A representative population of samples (n = 350) covering a wide distribution in chemical characteristics were used. Samples were scanned at 2 nm intervals over the wavelength range 400-2500 nm in a NIRS 6500 (NIRSystems, Silver Spring, MD, USA) in reflectance mode. Cross validation was used to avoid overfitting of the equations. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV). The calibration statistics were R$^2$ 0. 86 (SECV: 11.4), 0.90 (SECV: 5.7), 0.90 (SECV: 16.9) for dry matter (DM), crude protein (CP), acid detergent fiber (ADF) in g kg$\^$-1/ on dry matter, respectively for maize silage samples. This work demonstrates the potential of NIRS to analyse whole - maize silage in a wide range of chemical characteristics for both advisory farm and nutritive evaluation.

• Journal of Ginseng Research
• /
• v.47 no.4
• /
• pp.561-571
• /
• 2023

Background: Escalating evidence shows that ginseng possesses an antiaging potential with cognitive enhancing activity. As mountain cultivated ginseng (MCG) is cultivated without agricultural chemicals, MCG has emerged as a popular herb medicine. However, little is known about the MCG-mediated pharmacological mechanism on brain aging. Methods: As we demonstrated that glutathione peroxidase (GPx) is important for enhancing memory function in the animal model of aging, we investigated the role of MCG as a GPx inducer using GPx-1 (a major type of GPx) knockout (KO) mice. We assessed whether MCG modulates redox and cholinergic parameters, and memory function in aged GPx-1 knockout KOmice. Results: Redox burden of aged GPx-1 KO mice was more evident than that of aged wild-type (WT) mice. Alteration of Nrf2 DNA binding activity appeared to be more evident than that of NFκB DNA binding activity in aged GPx-1 KO mice. Alteration in choline acetyltransferase (ChAT) activity was more evident than that in acetylcholine esterase activity. MCG significantly attenuated reductions in Nrf2 system and ChAT level. MCG significantly enhanced the co-localization of Nrf2-immunoreactivity and ChAT-immunoreactivity in the same cell population. Nrf2 inhibitor brusatol significantly counteracted MCG-mediated up-regulation in ChAT level and ChAT inhibition (by k252a) significantly reduced ERK phosphorylation by MCG, suggesting that MCG might require signal cascade of Nrf2/ChAT/ERK to enhance cognition. Conclusion: GPx-1 depletion might be a prerequisite for cognitive impairment in aged animals. MCG-mediated cognition enhancement might be associated with the activations of Nrf2, ChAT, and ERK signaling cascade.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.47-58
• /
• 2024

This study were conduced experimentally to analyze the heat-generating performance, flexural strength, and microstructure of conductive mortar mixed with micro steel fiber and multi-wall carbon nanotube (MWCNT). In the conductive mortar heat-generating performance and flexural strength tests, the mixing concentration of MWCNT was selected as 0.0wt%, 0.5wt%, and 1.0wt% relative to the weight of cement, and micro steel fibers were mixed at 2.0vol% relative to the volume. The performance experiments were conducted with various applied voltages (DC 10V, 30V, 60V) and different electrode spacings (40 mm, 120 mm) as parameters, and the flexural strength was measured at the curing age of 28 days and compared and analyzed with the normal mortar. Furthermore, the surface shape and microstructure of conductive mortar were analyzed using a field emission scanning electron microscope (FE-SEM). The results showed that the heat-generating performance improved as the mixing concentration of MWCNT and the applied voltage increased, and it further improved as the electrode spacing became narrower. However, even if the mixing concentration of MWCNT was added up to 1.0 wt%, the heat-generating performance was not significantly improved. As a result of the flexural strength test, the average flexural strength of all specimens except the PM specimen and the MWCNT mixed specimens was 4.5 MPa or more, showing high flexural strength due to the incorporation of micro steel fibers. Through FE-SEM image analysis, Through FE-SEM image analysis, it was confirmed that a conductive network was formed between micro steel fibers and MWCNT particles in the cement matrix.

• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.127-134
• /
• 2008

Potential economic impact of a hypothetical severe accident at a nuclear power plant(Uljin units 3/4) was estimated by applying the Delphi method, which is based on the expert judgements and opinions, in the process of quantifying uncertain factors. For the purpose of this study, it is assumed that the radioactive plume directs the inland direction. Since the economic risk can be divided into direct costs and indirect effects and more uncertainties are involved in the latter, the direct costs were estimated first and the indirect effects were then estimated by applying a weighting factor to the direct cost. The Delphi method however subjects to risk of distortion or discrimination of variables because of the human behavior pattern. A mathematical approach based on the Bayesian inferences was employed for data processing to improve the Delphi results. For this task, a model for data processing was developed. One-dimensional Monte Carlo Analysis was applied to get a distribution of values of the weighting factor. The mean and median values of the weighting factor for the indirect effects appeared to be 2.59 and 2.08, respectively. These values are higher than the value suggested by OECD/NEA, 1.25. Some factors such as small territory and public attitude sensitive to radiation could affect the judgement of panel. Then the parameters of the model for estimating the direct costs were classified as U- and V-types, and two-dimensional Monte Carlo analysis was applied to quantify the overall economic risk. The resulting median of the overall economic risk was about 3.9% of the gross domestic products(GDP) of Korea in 2006. When the cost of electricity loss, the highest direct cost, was not taken into account, the overall economic risk was reduced to 2.2% of GDP. This assessment can be used as a reference for justifying the radiological emergency planning and preparedness.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2018

This study was conducted to investigate the optimum irrigation method for propagation of cutting strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) plantlet in summer season. The cutting strawberry plantlets were planted in 24-cell tray ($60{\times}34{\times}10cm$) filled with commercial mixed medium (Tosilee) and placed in semi closed-type small plastic tunnel. Each semi closed-type small plastic tunnel was treated as follows; control (non-treatment), over head irrigation (twice a day), capillary mats irrigation (twice a day), or fog irrigation (30 minutes turn on and 10 minutes off from 8:00 to 18:00). The strawberry plantlets were rooted during 8 days in the semi closed-type small plastic tunnel, and then plastic film was removed. Growth parameters, such as plant height, root length, number of primary roots, petiole length, leaf length, leaf width, crown diameter, SPAD, leaf area, fresh and dry weights of the shoot and root, were measured at 61 days after cutting. Relative humidity in tunnel was high in the order by fog irrigation, over head irrigation, capillary mats, and the control as 72.5, 56.3, 45.8, and 29% on average, respectively. However, the air temperature was similar in all treatments. On the 4 and 8 days, the rooting rate of strawberry plantlet was significantly higher in the over head irrigation and fog irrigation treatments. Plant height, petiole length, crown diameter, and leaf area were highest in the over head irrigation and fog irrigation treatments. In addition, fresh and dry weights of shoot were greater in over head irrigation and fog irrigation treatments than the others. Dry weight of root was differed significantly heaviest in the fog irrigation treatment. However, root length, no. of primary roots, SPAD value, and fresh weight of root were not significantly different in all treatments. These results indicated that growth and rooting for propagation of cutting strawberry plantlet 'Maehyang' were best achievement in the over head irrigation and fog irrigation treatments.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.220-227
• /
• 2016

The objective of this research was to investigate the influence of application rates of dolomitic lime in the acid substrate on the mitigation of high bicarbonate damage in 'Seolhyang' strawberry. For this purpose, an acid substrate was formulated by mixing of sphagnum peat moss and pine bark with the ratio of 5:5 (v/v). The pH, EC and CEC of the substrate analyzed before application of dolomite were 4.07, $0.46dS{\cdot}m^{-1}$, and $91.3cmol+/kg^{-1}$, respectively. To adjust the pH of substrate, various amounts of dolomitic lime [$CaMg(CO_3)_2$] such as 0 (control), 1, 2, 3, and $4g{\cdot}L^{-1}$ were added during substrate formulation. Then, seedlings with 3 leaf stage were transplanted as mother plants and those were fed with Hoagland solution containing $240mg{\cdot}L^{-1}$ of the $HCO_3{^-}$. The growth parameters of mother plants 140 days after transplanting, such as plant height, chlorophyll content, and fresh weight were the highest in the treatments of 2 and $3g{\cdot}L^{-1}$ of dolomitic lime. The physiological disorders in mother plants were not observed in the 1, 2 and $3g{\cdot}L^{-1}$ treatments, but the symptoms of Ca, K and B deficiencies were observed in the 0 and $4g{\cdot}L^{-1}$ treatments. During the propagation period, the number of daughter plants derived from each mother plant were 21.0, 29.5, 35.8, 27.3 and 16.0 in the treatments of 0, 1, 2, 3 and $4g{\cdot}L^{-1}$, respectively. The substrate pH during cultivation of mother plants were maintained at appropriate levels for the 1 and $2g{\cdot}L^{-1}$ treatments, whereas it was the highest in $4g{\cdot}L^{-1}$ treatment. The contents of macro- and micro-elements in the above ground tissue were the highest in $2g{\cdot}L^{-1}$ and the lowest in $4g{\cdot}L^{-1}$ lime treatments. Above results suggest that the bicarbonate injury originated from ground water can be mitigated by adjusting the amount of dolomitic lime incorporated into the acid substrate.