• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.737-741
• /
• 2007

This paper analyses the environmental effect of 100kw PV system installed in Tibet using Life Cycle Assessment(LCA). Then, energy payback time(EPT) and life-cycle $CO_2$ emission rate are estimated based on life-cycle of the PV system. As a result of the estimation, 6 year of EPT and 20 g-C/kWh of $CO_2$ emission rate are obtained. In China, average $CO_2$ emission rate of fossil fuel power generation plant is 260 g-C/kWh. This shows that PV system would be very promising for global environmental issues. For advanced LCA, we need to collect detailed and various data about raw material of PV system.

• 신재생에너지
• /
• 제3권2호
• /
• pp.11-16
• /
• 2007

This paper analyses the environmental effect of 100kw PV system installed in Tibet using Life Cycle Assessment(LCA). Then, energy payback time(EPT) and life-cycle CO2 emission rate are estimated based on life-cycle of the PV system. As a result of the estimation, 6 year of EPT and 20 g-C/kWh of CO2 emission rate are obtained. In China, average CO2 emission rate of fossil fuel power generation plant is 260 g-C/kWh. This shows that PV system would be very promising for global environmental issues. For advanced LCA, we need to collect detailed and various data about raw material of PV system.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.25-31
• /
• 2005

Computer simulations were performed for Heating Ventilating and Air-Conditioning (HVAC) systems to figure out more efficient maintenance methods for the building used for adolescent trainees. This study aims at suggesting design alternatives for optimum operation and performing life cycle cost (LCC) for each alternative. First, the capacity of the heat source equipment was determined using annual maximum heating and cooling loads. Annual loads were calculated and applied to the alternative for the purpose of calculating annual energy cost. Second, several types of data were collected to predict energy cost. Finally, the pay back period for each alternative was calculated using total cost estimation during standard duration period. This study indicates that the absorption chiller that does not occupy most part of a mechanical room, and does not need much operation cost was most economical.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제30권1호
• /
• pp.26-30
• /
• 2015

Tropical Tasar culture is forest and agro-based activity that covers agricultural and industrial activity. Tasar silk is produced by the silkworm, Antheraea mylitta which is polyphagous in nature. A large number of pests are reported to attack both the host plant as well as silkworm. As the rearing is conducted outdoor silkworms are exposed to attack of various pests during their life cycle. Eocanthecona furcellata (Hemiptera: Pentatomidae) is the major predator of tasar silkworm during young age rearing. Both nymphs and adults of the stink bug suck the heamolymph of silkworm leading to death. The present work was undertaken to study the life cycle of E. furcellata on larvae of vapourer tussock moth which is a major pest of tasar host plants. The incubation period, nymphal duration and total developmental period from egg to adult was $8.0{\pm}0.45d$, $16.0{\pm}3.24$ and $22.0{\pm}4.20d$, respectively. Pre-oviposition, oviposition and longevity of male and female stink bug was $3.20{\pm}0.38$, $17.60{\pm}1.86$, $42.40{\pm}1.94$, $37.00{\pm}3.18d$, respectively. Analysis of the data revealed no significant difference in life cycle of the predator when provided silkworm and vapourer tussock moth larvae as hosts. Which clearly indicates that E. furcellata can multiply on vapourer tussock moth larvae during non rearing periods. Adoption of recommended pest control measures for defoliators of tasar host plants during non-rearing periods will help in reducing the incidence of host plant pests and also in reducing the incidence of stink bug during rearing season. During the study it was also observed that larvae semilooper, boll headed caterpillar and nymphs of leaf hopper serve as alternate/secondary hosts to E. furcellata during non rearing seasons.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.515-522
• /
• 2014

혼화재로서 플라이애시가 콘크리트의 전과정 환경영향에 미치는 효과를 정량적으로 평가하기 위하여, 4023개의 실내배합 및 2120개의 레미콘 배합을 분석하였다. 전과정 환경 평가에서 환경부하는 분류화, 특성화, 정규화 및 가중치 단계를 거쳐 정량적인 환경영향 지표로 환산되었다. 콘크리트 전과정 환경영향은 주로 지구 온난화, 광화학 산화 생성물 및 무생물 자원고갈의 세 범주로 분류될 수 있었다. 또한, 콘크리트의 환경영향 지표들은 플라이애시 치환율의 증가와 함께 감소하였으며, 대부분 보통 포틀랜드 시멘트의 양에 의해 결정되었다. 이를 고려하여, 콘크리트의 환경영향 지표들은 단위 결합재 양 및 플라이애시 치환율의 함수로 간단하게 모델링 될 수 있었다.

• 상하수도학회지
• /
• 제20권6호
• /
• pp.919-926
• /
• 2006

In this study, environmental impact assessments of wastewater treatment plant (WWTP), sewerage system, and tailrace were performed using LCA methodology. The life cycle stages were divided into 3 categories; construction stage, maintenance stage and demolition & disposal stage. As a tool of impact assessment, Ecoindicator99 containing fate analysis, exposure & effect analysis and damage analysis, was used. As tile results of WWTP LCA, more than 80% of environmental impact was produced from maintenance stage. On the other hand, most of environmental impact was produced from construction stage in the case of tailrace and sewerage system construction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.7-12
• /
• 2000

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable ${\Delta}T$ limit curve during the startup. Because allowable ${\Delta}T$ limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage and combined rupture and low cycle fatigue damage criterion proposed for yielding the allowable ${\Delta}T$ limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has peformed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ${\Delta}T$ limit curve.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.1-6
• /
• 2002

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable △T limit currie during the startup. Because allowable ΔT limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage, combined rupture and low cycle fatigue damage criterion were proposed for yielding the allowable ΔTf limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has been performed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ΔT limit curve.

• 시스템엔지니어링학술지
• /
• 제10권2호
• /
• pp.21-31
• /
• 2014

Recently, global market competition of iron and steel products is ever increasing due to over-supply from increased number of industries in rapidly growing countries, such as China, Brazil, and Indonesia. To occupy the big market, major industries are trying to develop high quality, high performance steel products via developing a new iron and steel making process. In other words, development of a new and innovative steel plant is a key to cope with the tough situation. Design and development for the life cycle of iron and steel making plant is very much complex and multi-disciplinary. In this paper, Plant Systems Engineering (PSE), a tailored SE process for industrial plant based on ISO/IEC 15288 is used for the design of Continuous Casting Process (CCP) Plant system. The CCP is a crucial process in steel making plant, whose design technology is occupied by the advanced foreign companies. For the sake of increasing engineering capability for the design of CCP, we applied PSE Process for the renovation of the existing CCP Process. Through the study, we were convinced that the applied method can be used for other plant systems, and SE is really the way of thinking, design, and development of modern complex and multi-disciplinary systems where high risk factors are present throughout the whole life cycle.