• 자원환경지질
• /
• 제31권6호
• /
• pp.519-526
• /
• 1998

A high-resolution seismic survey was conducted at the northeastern boundary of Pungam basin, one of the Cretaceous sedimentary basins in Korea. A 100 kg weight was used as an energy source and was found to be better than a sledge hammer in mapping deeper geologic structures. Several processing techniques such as f-k filtering, predictive deconvolution, and time-variant filtering are useful to enhance the signal-to-noise ratio by suppressing unwanted seismic energy. Four seismic units are recognized where many vertical faults are developed. The boundary fault between sedimentary rocks and Precambrian gneiss is identified along with a fracture zone of approximately 30 m wide. Bedding planes of the sedimentary rocks dipping westward are interpreted to be limbs of a syncline or volcanic flow. There faults and tilted bedding planes indicate that the basin had undergone significant tectonic deformation.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.217-224
• /
• 2003

In this study, the adaptive triangular beam method(ATBM) considering different sound reflection coefficients and angles of a triangular beam on two or more planes as well as diffraction effect is suggested. The ATBM, subdividing a tracing triangular beam into multiple triangular beams on reflection planes, gives reliable and convergent sound-field analysis results without the dependancy on the number of initial triangular beam segmentation to search sound propagation paths from source to receiver. The validity of the method is verified by the comparison of numerical and experimental results for energy decay curve and steady-state sound pressure level of rooms having direct, reflective and diffractive sound paths.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.170-180
• /
• 1995

A parallel crack in bonded dissimilar orthotropic planes under out-of-plane loading is analyzed. The problem is formulated by Fourier integral transforms, and reduced to a pair of dual integral equations. By solving the integral equations, the asymptotic stress and displacement fields near the crack tip are determined in closed form, from which the stress intensity factor and energy release rate are obtained. Discontinuity in the stress intensity factor as the distance ratio h/a of the parallel crack approaches zero is found, while the energy releas rate is shown to be continuous at h/a = 0. This information can immediately be used to generate the stress intensity factor for the parallel crack near the interface. By employing "the maximum energy release rate criterion", it could be shown in the case of no existing crack initially that the parallel crack is formed far from the interface for the more compliant material, while it is formed close to the interface for the stiffer material. material.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.190-197
• /
• 2002

A new design methodology is presented for the multi-degree-of-freedom vibration absorber for an elastically suspended rigid body with planes of symmetry in general motion. Unlike the common single degree-of-freedom vibration absorber, the presented methodology makes use of both linear and rotational properties of the absorber. It is suggested that an absorber is designed separately for the in-plane and out-of-plane vibration modes and thereby combined the two cases for a six-degree-of-freedom absorber. The nine possible design methods are suggested for the six-degree-of-freedom absorber when an elastically suspended rigid body has one, two, or three planes of symmetry.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1998년도 하계 학술대회 논문집
• /
• pp.270-275
• /
• 1998

It was assumed that the voice of cattle is generated with the virtual white noise through the digital filter called the linear prediction filter, and filter parameters (prediction coefficients) were estimated by the maximum entropy method (MEM) , using the sound signal of the animal . The feature planes were defined by the pairs of two parameters selected appropriately from these parameters. The cattle voices were divided into three levels, that is the high, medium and low levels according to their total power equivalent to the variances of the sound signal . It was found that the straight lines could be used for recognizing tow cow and one calf for high level voices. For high and medium level voices, however, it was difficult or impossible to recognize individual cattle on the parameters planes.

• 공학논문집
• /
• 제8권1호
• /
• pp.51-57
• /
• 2006

We propose efficient methods for implementing 3-D reconstruction algorithms for Compton camera. Since reconstructing Compton scattered data involves the surface integral over the cone associated with the measurement bin, it is crucial to develop a computationally efficient surface integration method. In this work we assume that a cone is made up of a series of ellipses (or circles) stacked up one o top of the other. In order to reduce computational burden for tracing ellipses formed by the intersection of a cone and an image plane, we construct a series of imaginary planes perpendicular to the cone axis so that each plane contains a circle, not an ellipse. In this case the surface integral can be performed by adding uniform samples along each circle. The experimental results demonstrate that our method using imaginary planes significantly improves computational efficiency while keeping reconstruction accuracy.

• 호남수학학술지
• /
• 제36권3호
• /
• pp.475-492
• /
• 2014

In this study, we have investigated the possibility of whether any spacelike Frenet plane of a given space curve in Minkowski 3-space $\mathbb{E}_1^3$ also is any spacelike Frenet plane of another space curve in the same space. We have obtained some characterizations of a given space curve by considering nine possible case.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2393-2396
• /
• 2005

We present a method to detect on-road vehicle using geometric invariant of feature points on side planes of the vehicle. The vehicles are assumed into a set of planes and the invariant from motion information of features on the plane segments the plane from the theory that a geometric invariant value defined by five points on a plane is preserved under a projective transform. Harris corners as a salient image point are used to give motion information with the normalized correlation centered at these points. We define a probabilistic criterion to test the similarity of invariant values between sequential frames. Experimental results using images of real road scenes are presented.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.153-161
• /
• 1999

An atomatic mesh generation scheme with unstructured quadrilateral elements on trimmed surfaces has been developed. Trimmed surfaces are often encountered in modeling of structures with complex shapes such as aircrafts, automobile structures, pressure vessels and etc. For unstructured mesh generation with quadrilateral elements, a domain decomposition algorithm employing loop operators has been used. Mesh generation on trimmed surface is performed in three steps. First, trimmed surfaces with holes or cuts are transformed to th largest projection planes in which the meshes are constructed. The constructed meshes are transformed to the u-v parametric plane and then finally to the original 3D surfaces. Th exact locations of holes or cuts in projection planes are determined by the Newton-Raphson method. Sample meshes are constructed to demonstrate the effectiveness of the proposed algorithm.

• 한국결정학회지
• /
• 제11권4호
• /
• pp.207-211
• /
• 2000

In a Czochralski silicon single crystal, the relation between the growth twin and the crystal morphology was investigated. The growth twin is nucleated on the {111} facet planes near the growth ridges. When a {111} growth twin is formed in the <100> silicon crystal, the growth ridge where twin is nucleated will continuous through the twin plane. Other two ridges at the 90。 apart will be displaced about 33° and be deformed to facets. The ridge on the opposite side of twin nucleation will disappear by forming a slight hill. Because the growth ridges of silicon is due to the {111} planes, the variation in the growth ridge formation can be predicted clearly by considering the change of the {111} plane traces in the stereographic projection after twining.