• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.227-229
• /
• 2010

This study presents an application of the 3D patch extraction method which is based on gradient-driven properties to obtain 3D planar patches over the terrain and man-made objects from lidar data. The method which was exploited in this study is composed of a sequence of processes: segmentation by slope, initiation of triggering patches by mode selection, and expansion of the triggering patches. Since urban areas contain many planar regions over the terrain surface, application of the method has been experimented to extract 3D planar patches not only from non-terrain objects but also from the terrain. The experimental result shows that the method is efficient to acquire 3D planar patches.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.546-549
• /
• 1990

This study introduces the three-dimensional information about moving objects. Relative motion between textured objects and observer generates a time varying optic array at the image, from which image motion of contours can be extracted. Closed-form solutions are proposed for the structure and motion of planar and curved surface patches. The analytic solution for curved surface patches combines the transformation of Longuet-Higgins with the planar surface solution of Subbarao and Waxman. Ovoid patches are shown to construct a unique transform angle. Thus, ovoid patches almost always yield a unique 3D interpretation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.97-103
• /
• 2011

LiDAR system has become a popular tool for generating 3D surface data such as Digital Surface Model. Extraction of valuable information, such as digital building models, from LiDAR data has been an attractive research subject. This research addresses to extract planar patches from LiDAR data. Planar patches are important primitives consisting of man-made objects such as buildings. In order to determine the best fitted planes, this research proposed a method to reduce/eliminate the impact of the outliers and the intersection areas of two planes. After finishing plane fitting, planar patches are segmented by pseudo color values which are calculated by determined three plane parameters for each LiDAR point. In addition, a segmentation procedure is conducted using the pseudo color values to find planar patches. This paper evaluates the feasibility of the proposed method using both airborne and terrestrial LiDAR data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.723-733
• /
• 2009

This study proposes a sequence of procedures to extract building boundaries and planar patches through segmentation of rasterized lidar data. Although previous approaches to building extraction have been shown satisfactory, there still exist needs to increase the degree of automation. The methodologies proposed in this study are as follows: Firstly, lidar data are rasterized into grid form in order to exploit its rapid access to neighboring elevations and image operations. Secondly, propagation of errors in raw data is taken into account for in assessing the quality of gradients-driven properties and further in choosing suitable parameters. Thirdly, extraction of planar patches is conducted through a sequence of processes: histogram analysis, least squares fitting, and region merging. Experimental results show that the geometric components of building models could be extracted by the proposed approach in a streamlined way.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.575-583
• /
• 2007

Surface segmentation aims to represent the terrain as a set of bounded and analytically defined surface patches. Many previous segmentation methods have been developed to extract planar patches from LIDAR data for building extraction. However, most of them were not fully satisfactory for more general applications in terms of the degree of automation and the quality of the segmentation results. This is mainly caused from the limited information derived from LIDAR data. The purpose of this study is thus to develop an automatic method to perform surface segmentation by combining not only LIDAR data but also images. A region-based method is proposed to generate a set of planar patches by grouping LIDAR points. The grouping criteria are based on both the coordinates of the points and the corresponding intensity values computed from the images. This method has been applied to urban data and the segmentation results are compared with the reference data acquired by manual segmentation. 76% of the test area is correctly segmented. Under-segmentation is rarely founded but over-segmentation still exists. If the over-segmentation is mitigated by merging adjacent patches with similar properties as a post-process, the proposed segmentation method can be effectively utilized for a reliable intermediate process toward automatic extraction of 3D model of the real world.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.250-256
• /
• 2005

A novel planar polarization-agile microstrip subarray is proposed and its performance assessed by a thorough numerical investigation. The subarray consists of five square patches with a central element, directly coupled to a pair of microstrip feed lines by a cross-shaped aperture, which spreads the power outwards to the other patches through a network of suitable connections. By properly exciting the antenna at its input ports, any kind of polarization of the radiated field can be accomplished with fairly low cross-polarization levels. Moreover, since only two feed lines are required to drive the whole subarray, polarization agility is simply and attractively achieved by a single phase-shift circuit. The design concept is described and the results of the analyses and simulations performed by two completely independent full-wave approaches are presented and discussed.

• Korean Journal of Geomatics
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2005

Precise geometric registration is required in multi-source data fusion process to obtain synergistic results successfully. However, most of the previous studies focus on the assumption of perfect registration or registration in a limited local area with intuitively derived simple geometric model. In this study, therefore, we developed a robust method for geometric registration based on a systematic model that is derived from the geometry associated with the data acquisition processes. The key concept of the proposed approach is to utilize smooth planar patches extracted from LIDAR data as control surfaces to adjust exterior orientation parameters of the aerial images. Registration of the simulated LIDAR data and aerial images was performed. The experimental results show that the RMS value of the geometric discrepancies between two data sets is decreased to less than ${\pm}0.30\;m$ after applying suggested registration method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1015-1022
• /
• 2007

In this paper, we proposed a wideband design of planar inverted-F antenna(PIFA) using two-layer, patches and modified ground structure. The antenna consists of two layer patches with common feed and modified ground plane to control resonance frequency and antenna input impedance. The measured bandwidth is 1,492 MHz(BW: 67.7 %, 1,457${\sim}2,949$ MHz) for VSWR<2, and 1,170 MHz(BW: 21 %, 4,970${\sim}$6,140 MHz) for VSWR<2.5. It covers service bands of DCS1800, DCS1900, UMTS(WCDMA), WiBro, WLAN(IEEE 802.11b), satellite DMB. WLAN(IEEE 802.11a) in Korea and radiation patterns shows constant figure with frequency change.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.111-121
• /
• 2006

Recently, many studies have been performed to apply airborne LIDAR data to extracting urban models. In order to model efficiently the man-made objects which are the main components of these urban models, it is important to extract automatically planar patches from the set of the measured three-dimensional points. Although some research has been carried out for their automatic extraction, no method published yet is sufficiently satisfied in terms of the accuracy and completeness of the segmentation results and their computational efficiency. This study thus aimed to developing an efficient approach to automatic segmentation of planar patches from the three-dimensional points acquired by an airborne LIDAR system. The proposed method consists of establishing adjacency between three-dimensional points, grouping small number of points into seed patches, and growing the seed patches into surface patches. The core features of this method are to improve the segmentation results by employing the variable threshold value repeatedly updated through a statistical analysis during the patch growing process, and to achieve high computational efficiency using priority heaps and sequential least squares adjustment. The proposed method was applied to real LIDAR data to evaluate the performance. Using the proposed method, LIDAR data composed of huge number of three dimensional points can be converted into a set of surface patches which are more explicit and robust descriptions. This intermediate converting process can be effectively used to solve object recognition problems such as building extraction.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1115-1125
• /
• 2013

This paper presents a scheme for geometric correction of projected content for planar and quadratic projection surfaces. The scheme does not require the projection surface to be perfectly quadratic or planar and is therefore suitable for uneven low-cost commercial and home projection surfaces. An approach based on the recursive subdivision of second-order B$\acute{e}$zier patches is proposed for the estimation of projection distortion owing to surface imperfections. Unlike existing schemes, the proposed scheme is completely automatic, requires no prior knowledge of the projection surface, and uses a single uncalibrated camera without requiring any physical markers on the projection surface. Furthermore, the scheme is scalable for geometric calibration of multi-projector setups. The efficacy of the proposed scheme is demonstrated using simulations and via practical experiments on various surfaces. A relative distortion error metric is also introduced that provides a quantitative measure of the suppression of geometric distortions, which occurs as the result of an imperfect projection surface.