• Journal of Electrochemical Science and Technology
• /
• v.5 no.3
• /
• pp.73-81
• /
• 2014

This paper describes the continuous flow operation of membraneless sodium perborate fuel cell using acid/alkaline bipolar electrolyte. Here, hydrazine is used as a fuel and sodium perborate is used as an oxidant under Alkaline-acid media configuration. Sodium perborate affords hydrogen peroxide in aqueous medium. In our operation, the laminar flow based microfluidic membranleless fuel cell achieved a maximum power density of $27.2mW\;cm^{-2}$ when using alkaline hydrazine as the anolyte and acidic perborate as the catholyte at room temperature with a fuel mixture flow rate of $0.3mL\;min^{-1}$. The simple planar structured membraneless sodium perborate fuel cell enables high design flexibility and easy integration of the microscale fuel cell into actual microfluidic systems and portable power applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.2
• /
• pp.109-115
• /
• 2017

Using the computational fluid dynamics (CFD) technique, we performed a numerical simulation in anodesupported solid oxide fuel cell (SOFC). The effect of gas channel/rib width on the cell performance and temperature uniformity was investigated in planar type SOFC. The open source CFD toolbox, OpenFOAM, was used as a numerical analysis tool. As a result, the effect of gas channel/rib width on the cell performance and temperature uniformity was not significant if the oxygen depletion is not occurring. On the other hand, the usage of a wide rib and operation at high current density may lead to performance degradation due to oxygen depletion.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.368-373
• /
• 2004

To improve the conventional cathode-supported tubular solid oxide fuel cell (SOFC) from the viewpoint of low cell power density, expensive fabrication process and high operation temperature, the anode-supported tubular solid oxide fuel cell was investigated. The anode tube of Ni-8mol% $Y_2$O$_3$-stabilized $ZrO_2$ (8YSZ) was manufactured by extrusion process, and, the electrolyte of 8YSZ and the multi-layered cathode of $LaSrMnO_3$(LSM)ILSM-YSZ composite/$LaSrCoFeO_3$ were coated on the surface of the anode tube by slurry dip coating process, subsequently. Their cell performances were examined under gases of humidified hydrogen with 3% water and air. In the thermal cycle condition of heating and cooling rates with $3.33^{\circ}C$/min, the anode-supported tubular cell showed an excellent resistance as compared with the electrolyte-supported planar cell. The optimum hydrogen flow rate was evaluated and the air preheating increased the cell performance due to the increased gas temperature inside the cell. In long-term stability test, the single cell indicated a stable performance of 300 mA/$\textrm{cm}^2$ at 0.85 V for 255 hr.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1018-1024
• /
• 2001

In this paper, an array antenna is designed far base station of a street micro-cell in urban areas. It has a rectangular radiation pattern. The current distribution of the array is decided by using a modified Woodward-Lawson sampling pattern synthesis method. To confirm the realization of the array antenna with rectangular pattern, 12 array antenna with a planar type monopole fed by stripline is fabricated and measured. In the results of the measured values, H-plane pattern of the antenna nearly yields a rectangular radiation pattern.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.45-49
• /
• 2010

This paper presents an analytical formulation of the numerical reflection coefficient of the ID-FDTD scheme at the planar dielectric boundary for a TM wave incidence. The reflection coefficient is formulated in an approximate manner, and the accuracy of this method is numerically verified. The effective dielectric constant for a grid on the interface is obtained, and then reduced to that of the Yee scheme for a small cell size.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.490-495
• /
• 2015

This paper was proposed the theoretical research and optimal design 3,000 V IGBT for using electrical automotive, high speed train and first power conversion. To obtaining 3,000 V breakdown voltage, the design parameters was showed $160{\Omega}{\cdot}cm$ resistivity and $430{\mu}m$ drift length. And to maintain 5 V threshold voltage, we obtained $6.5{\times}10^{13}cm^{-2}$ p-base dose. We confirmed $24{\mu}m$ cell pitch for maintain optimal on state voltage drop and thermal characteristics. This 3,000 V IGBT was replaced to thyristor devices using first power conversion and high speed train, presently.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.472-474
• /
• 2010

In this letter, a novel zeroth-order resonant (ZOR) antenna on vialess co-planar waveguide (CPW) is proposed. It is based on a composite right/left-handed CPW transmission line. To achieve a compact size, this antenna utilizes the ZOR condition, and its reactive parameters determine the resonant frequency. Each unit cell is composed of a metallic top patch and meander lines. Since it is realized on the CPW single layer, the proposed antenna has the benefits of being a compact size and easy to fabricate. The bandwidth of 6.8% and efficiency of 62% are experimentally achieved. Its bandwidth is enhanced compared with other ZOR antennas.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.283-287
• /
• 1997

In order to identify the structural requirement at 4-position of 1-arylsulfonyl-4-phenyl-4,5-dihydro-2-limidazolones 3 for their cytotoxicity, the corresponding 1-arylsulfonyl-4-cyclohexyl-4,5-dihydro-2-imidazolones 4 were synthesized and their in vitro cytotoxicity against human solid tumor cell lines were measured. Unlike compounds 3a-c, cyclohexyl analogues 4a-c do not show the cytotoxicity. This dramatic loss of activity of these analogues on the volume change with the bulkier cyclohexyl group indicates that the planar structure at 4-position of 1-arylsulfonyl-4-pheny-4,5-dihydro-2-limidazolones 3 is required for their activity as an important pharmacophoric moiety.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.369-376
• /
• 1996

Variations of the drag and lift forces of a circular cylinder in a planar turbulent jet were experimentally investigated. The force was directly measured using the load cell and estimated by integrating the pressure distribution on the cylinder. As the cylinder moves outward from the center of the jet, the direction of lift force changes and the drag force decreases. Reynolds number, the ratio of cylinder's diameter to half width of jet had effect on maximum drag coefficient and the location where the direction of lift changes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.105-108
• /
• 2020

In this study, experiments and simulations were conducted for a 1,200-V-class trench Si insulated-gate bipolar transistor (IGBT) with a small cell pitch below 2.5 ㎛. Presently, as a power device, the 1,200-V-class trench Si IGBT is used for automotives including electric vehicles, hybrid electric vehicles, and industrial motors. We obtained a breakdown voltage of 1,440 V, threshold of 6 V, and state voltage drop of 1.75 V. This device is superior to conventional IGBTs featuring a planar gate. To derive its electrical characteristics, we extracted design and process parameters. The cell pitch was 0.95 ㎛ and total wafer thickness was 140 ㎛ with a resistivity of 60 Ω·cm. We will apply these results to achieve fine-pitch gate power devices suitable for electrical automotive industries.