• 환경영향평가
• /
• 제20권3호
• /
• pp.367-379
• /
• 2011

This study was conducted to develop an ecological park planning model to enhance the functions of habitats and ecological corridors in Green Belt Areas, because changing policies have resulted in the degredation of the Green Belts due to progressive fragmentation of ecosystems. The principal outcome of the study is to plan an ecological park model through the restoration of habitats. In order to evaluate the capacity of the model to enhance the ecological functions of habitats and ecological corridors in Green Belt Areas, a simulation of habitats was carried out in the Sungnam-Yusoo region. The model was developed via following steps: 1. Selection of candidate sites and selection of the study site by analyzing development factors; 2. Selection of target species that can represent the habitat at the site; 3. Analysis of the site's suitability index for the target species; 4. Establishment of a conceptual plan to enhance and expand the currently produced suitability index; 5. Creation of a master plan based on the conceptual plan; and 6. Evaluation of the enhanced and expanded suitability index of the site. The study showed that the Habitat Unit (HU) of Rana coreana, which was selected as the target species of the study, increased from $28,044m^2$(3.6%) to $224,352m^2$(28.8%), and the HU of the site as the ecological corridor for wild animals increased from $4,674m^2$(0.6%) to $152,684m^2$(19.6%). The study results show that the ecological deficits of the Green Belt Area can be overcome by enhancing the ecological functions of the region, which should be beneficial. The model could be utilized for effective enhancement and management of other Green Belt Areas.

• 교육시설
• /
• 제6권2호
• /
• pp.24-40
• /
• 1999

The purpose of this study is planning a representative model of a modernized school with rearrangement of existing two primary schools(Nammyun and Namjin) and a middle school(Seonam) in Nammyun distric. Nammyun district, which is adjacent to Tae-an national ocean park, is the Place where gas a natural advantage. However, in the result of the rural exodus follwed by industrialization, the population in this province are decreased rapidly and it still be on the process of the rural exodus. Hence, the total number of students, each school is under 100 at the moment and the number will be less in the future. Under this consequences, the rearrangement of these school is inevitable. For the new modernized school plan Narnmyun district, estimate the scale of school on the basis of decreased number of students, the analysis the 7th education plan and the questionnaire and face-to-face interview investigation, which is a resident-orented investigation, were carried out preferentially. The major research contents are as follows; o Expansion of schools facility and space for operating the 7th education plan(classified level schools level and subject-based class school plan) o Over-all improvement of educational environment to take all-out advantages of school, social and home education. o The school which can take a part of an educational center of a rural community in schools off-time-after school and summer and winter vocation. o The school which is related to the local cultural, sports and entertainment utility, On the basis of this research, the basic concept and purpose of a new school model model plan in Nammyun will be established and the new school plan represented for the result of this research.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.117-124
• /
• 1998

This paper proposes a simulation model which evaluates operation plans of container terminal. The operation plans of container terminal consist of berth plan, load plan, unload plan, yard plan, and equipment plan. It is discussed how to apply the simulation method to evaluate those plans. Simulation analysis is based on data about plans from the operation planning system through an interface program. It is discussed what we should got in the simulation, for example, the statistics about container-handling equipment such as container cranes, transfer cranes, yard tractors, and trailers used in the transportation of containers.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.319-328
• /
• 1998

In this paper, the design of ALT(Accelerated Life Test) requires a sampling plan based on failure-censored(Type II censored) ALT with lognormal life distribution. Specially the environmental effect of products has been emphasized, so we considered the upper life limit as well as lower life limit in the ALT sampling plan. The optimal plan with a high stress and a low stress is used as test plan, and the total sample size for test and lot acceptability constant which minimize an asymptotic variance of maximum likelihood estimator of assumed model parameters and satisfy the given producer's risk and customer's risk are drawn out. These values can be acquired by means of the computer program that we coded for resolving the difficulty and complexity of calculation.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.645-650
• /
• 2011

Objective: The aim of this study is to design a sampling inspection plan with human error which is changing according to inspection time. Background: Typical sampling inspection plans have been established typically based on an assumption of the perfect inspection without human error. However, most of all inspection tasks include human errors in the process of inspection. Therefore, a sampling inspection plan should be designed with consideration of imperfect inspection. Method: A model for single sampling inspection plans were proposed for the cases that visual inspection error rate is changing according to inspection time. Additionally, a sampling inspection plan for an optimal inspection time was proposed. In order to show an applied example of the proposed model, an experiment for visual inspection task was performed and the inspection error rates were measured according to the inspection time. Results: Inspection error rates changed according to inspection time. The inspection error rate could be reflected on the single sampling inspection plans for attribute. In particular, inspection error rate in an optimal inspection time may be used for a reasonable single sampling plan in a practical view. Conclusion: Human error rate in inspection tasks should be reflected on typical single sampling inspection plans. A sampling inspection plan with consideration of human error requires more sampling number than a typical sampling plan with perfect inspection. Application: The result of this research may help to determine more practical sampling inspection plan rather than typical one.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.52-61
• /
• 2017

Considering its significant impact on the cost and schedule of construction projects, formwork as one part of temporary facility categories in construction should be arranged precisely. Current practice in the formwork planning is often conducted manually and repetitively, causing low efficiency and time waste. This study proposes an automated framework to generate more accurate and detailed formwork plans by utilizing information from building information modeling (BIM) considering the adequate geometric and semantic information provided by the BIM model. The dimensions and quantities information of elements in a building can be extracted automatically. Then, a rule is prepared for calculating the required forms erected around elements based on the contact areas. Finally, an algorithm of integrating first fit decreasing (FFD) with coordinated bottom left (CBL) is applied to automatically generate the formwork plan. The BIM-based automated planning framework is demonstrated by an illustrative example. The results show that the proposed framework can generate the formwork plan accurately and automatically, and significantly improve the efficiency in the formwork plan and reuse.

• 대한가정학회지
• /
• 제36권5호
• /
• pp.59-74
• /
• 1998

Home economics lesson plan model was developed based on cooperative learning stategy focusing on human development and family relations area. The cooperative learning is an instructional strategy that meets the challenge of helping students master home economics content objectives by acquiring and practicing the social skills that are essential in life for satisfactory relationships with peers, families, coworkers, and others in society. Through cooperative learning, students can satisfy their needs for friendship, power, belongs, and fun. Practical problems were selected in human development and family relations area for middle school students assuming that home economics is critical science. Lesson plans were developed according to the practical problems, "what should we do regarding the effective communication between family members\ulcorner".ner".uot;.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.183-190
• /
• 2018

Purpose: The purpose of this study was to evaluated the process of model analysis, design, and production for a full mouth prosthetic rehabilitation of function, esthetics, and pronunciation. Methods: This is a case report of class III malocclusion with a severe anterior incisor occlusion and a prosthetic treatment of patient with poor occlusion of posterior teeth. A provisional restoration based on the diagnostic wax-up was applied to the patient. And then functions, esthetics, and occlusal stability were observed during 4 week tracking period. Final restorations were delivered and evaluated based on a systematic analysis, diagnosis and treatment plan. Results: We confirms that this case study obtained the satisfactory results in terms of functions and esthetics. Conclusion : If we can give the patient the continuous evaluation and progress monitoring, we expect the dentist and the dental technician to design the prosthesis successfully.

• 디지털산업정보학회논문지
• /
• 제6권4호
• /
• pp.307-317
• /
• 2010

The majority of financial and general business organizations have had individual damage from hacking, worms, viruses, cyber attacks, internet fraud, technology and information leaks due to criminal damage. Therefore privacy has become an important issue in the community. This paper examines various elements of the information security management system and discuss about Information Security Management System Models by using the analysis of the financial statue and its level of information security assessment. These analyses were based on the Information Security Management System (ISMS) of Korea Information Security Agency, British's ISO27001, GMITS, ISO/IEC 17799/2005, and COBIT's information security architecture. This model will allow users to manage and secure information safely. Therefore, it is recommended for companies to use the security management plan to improve the companies' financial and information security and to prevent from any risk of exposing the companies' information.